Sct1886

1886

FYI: If you are shooting Izzy it double cycles many firearms. It is hot ammo. Check the firing pin to make sure it is free and loose. That can be a very dangerous problem.

I have had both. My advice is for shorter ranges the 4x or 6x, 0-300yds, especially the 7.62x39mm. The .308 or 0-600yds the 8x with a VARIABLE DIOPTER. The variable diopter is worth the few extra bucks. Best Regards Scott

Three words of advice: Ceiner coversions SUCK!!!

The Hesse POS was welded entirely. The crappy pictures were from my cell phone. I had two years of welding, they as stated were cold or failed to penetrate entirely. Yes, there was 6 plug type welds. Scott

Wolf was being fired. If ammo was the problem I would be wearing the trunnion and bbl. As stated above Hesse/Vulcan is crap... Two trunnion plug welds failed to penetrate and the others were cold. The ejector was also soft because it was never properly hardened. I bought this in the early 90s and got it back in horestrading or I would have never bought anything with a Hesse/Vulcan name affixed. You have bigger balls or less brains touching off a .50 with Vulcans name on it...

Reasonably accurate, clean and reliable. It overall is my favorite. S.A.= ex. good availability. buy as much as you can afford and or store. Port= ex., a little hot. buy, buy , buy Brit=good, loaded soft hard to find Izzy= good loaded hot, most are range pickups Austrian=excellent hard to find and expensive. sometimes boxer primed Australian= good, copper fouls Indian=crap, good if you do not mind your rifle blowing up. Malaysian=good, hard to find

Thats what I am in the middle of doing. The sight and gas block came right off, apparently mine was an early import. It looks as if I will have to fabricate a custom hanguard retainer. An RPK retainer would be the ticket, but are unavailable. I do not like the durability of the Tapco Galil style handguards. A couple of people reported the top section broke. I will wait and watch or build one when time and weather permit. Thanks Scott

What have you guys found for a .308 handguard retainer?? Std ones do not fit. Thx Scott

I welded mine. I bought an AK74 type pin on brake for the SKS from CDNN for $10. Hogged it out a little. Tack welded, aligned with a section of drill rod to insure aligment and welded away.

My buddy has an 8x42vd PSOP $130 shipped and a 6x PSOP $120 shipped. Best Regards Scott

Magazines gone..

Nighthawk: I emailed your hotmail address. Please let me know if you are interested or firmly with the seven mags. Best Regards Scott

Selling a buddies collection, he has seven new 5rd S12 mags $55 each shipped CONUS. Also has new PSOP 8x VD $130 shipped. http://www.kalinkaoptics.com/cgi-bin/kowst...no=GSPOSP842DAK USPSMO or PSOP6X $120 shipped. Note this model is not a variable focus. http://www.kalinkaoptics.com/cgi-bin/kowst...o=GSPOSP642DSVD USPS MO or PAYPAL (add3%) NOSPAMsbattles2@kc.rr.com Note: Paypal address different, I have gunbroker, ebay, falfiles feedback. I have listed his other fireams on gunbroker per his request. Best reards Scott

Try First Sons Enterprise 770-457-0009. Nice quality USA made copies. I ordered 10 and was very pleased at the high quality and great service, about $12 each I beleive. Scott