Drusagas

Awesome, thanks for the response. I will check them out tomorrow.

I've used all the FFL search engines I could find and most of them are outdated and those that do it are way over priced, but those are mainly the larger companies. I was just wondering if there's anywhere around Waco, TX that might be good? I'd be willing to drive a decent amount...

Yeah, I think I remember this. I think what started it was that a new S-12 owner had his converted before firing it at all and once he received it back it didn't work. It was found that it wasn't the converter's fault but something FUBAR'd with the manufacturing and now that he had converted it he couldn't take it back to the shop he bought it from. Something like that...don't know why it was deleted.

In the past 4 months....A Saiga 12, mosin, Springfield XD 9mm, two Rock River arms lowers, and an AR kit from Del-Ton.

"drus" is gaelic for "oak" "saga" is the gaelic for "sage" (roughly translated) Therefore with "drus-" as a prefix and "-sagas" as a suffix, you get drusagas. Rough translation can mean anything from Oakwise, Wise One of Oaks, Wise as an Oak, etc. Made up the name as a play on the word "druid".

These are seriously great shirts. I've sent some link and have already had people asking why I'd wear a shirt like that, or what it's for and it's given me the opportunity to educate some people who aren't liberal or anything, but just haven't really been paying attention. ++++++++++++++++1

Forgot to reply yesterday...Bought one through paypal and PM sent

So how do we pay with paypal??? I want one of these bad boys

SAWEET!! I'll definitely be up for one of the original one you posted as soon as you get that paypal going. +++++1

#8

Gears of War 2 and COD4 for me, same gamertag as my screen name

Really? That's nice to hear, cause from what I've read it seemed like the best to expect was 2" groups, 4" or more once the barrel started heating up. but maybe that has more to do with shooter error than rifle error.

Thanks both for the replies! and thanks tritium for the tip on Classic, looks like a decent price

Pretty decently priced, cheap ammo. I know they aren't sub moa or anything, mainly being used for DM type work. But it looks to be fun to shoot. What are your opinions and where's a good place to get one?

+1 on the online advice - I just bought two stripped lowers in the past month, one RRA for 166 shipped and the other was a DAS (or DSA, can't remember?) for 180 shipped. Those were better prices than anything else I'd found recently.

well, if you're happy with it then you didn't over pay at least that's what I tell myself. For myself I'd rather build one. I've got a rock river stripped lower and DPMS upper and so once the kit arrives, I'll put it all together and hopefully it'll work well. Congrats on your purchase!

Picked up my XD9 yesterday too! Loving it so far. It came with 3 16rd mags, which was nice, at least I think all the other ones I'd seen only had 1 10rd and 1 16rd.

WTF? Having a bad day? Gotta take it out on the intranets? Oh and Great Shooting man that's awesome. I shoot expert on the Army ranges but man that sounds pretty difficult.

Drusagas, You will reach a point where you realize that to continue to do work on your rifle you are going to need a press. Either that or a BF Hammer and lots of finger splints. Don't ask how I know about the finger splints. After my 3rd conversion and managing to replace my FSB without a press, but spending probably $75 to do it, I decided to get a press. My 12 ton press has arrived from Grizzley Industrial. I haven't had time to assemble it yet but it looks good. Delivered to your door for $113 and change. Best price for the press I could find. http://www.grizzly.com/out

So what if you don't have a shop press to push the barrel out? *Been having a lot of stuff go wrong in this, lol, like, I've had three punches snap on me. I've got all the pins out but there's now a piece of a punch stuck in there, so I'll have to go buy another one tomorrow to try and tap that out*

Ok, so, the front pin came out fine going right to left but the back pin is still giving me trouble but I think it's just being stubborn

ok hold up. One of you guys is saying to got left to right and the other is saying to go right to left.... A buddy of mine told me left to right and in another thread I also read right to left. I've been trying right to left and just been FUBARing the FSB. Though, it seems that going left to right isn't doing any good either

So I am hitting them in the right direction?

So, I'm trying to take my Front Sight Block off of my x39 and from reading in the tech section it seems I need to punch the pins from left to right when looking at the FSB while holding the rifle. I've tried this and it doesn't seem to be working... Also, do you know the pins off in the same direction for the gas tube block?

+1! I've ordered several things through them and all of them have gone very smoothly