sKott

I will take one Saiga 410 factory ten round magazine for $150 shipped if one is still available. I would like to pay with a USPS Money Order. Thanks sKott

I am interested in one of the 10 rounders. would you sell just 1 and what would the price be? thanks - sKott

Factory 8’s

Got a chance to check the counter mag with a magnet: Floor Plate: Metal Trunnion Lug: Plastic Mag release Lug: Plastic Mag Spine: No metal reinforcements Feed Lips: metal rear.

I have a solution for this. I have a small hole drilled for a pull pin . One less round. Push rounds down, slide pin across the brass, works like a charm. id post pictures but the choose file option does not seem to work. sKott

These are Russian Aftermarket mags made by Polygon. They accept 10 rounds and have Several windows on one side that act as a round counter with numbers stamped into the follower. I believe the footplate is metal. I’ll check the lugs and stuff with a magnet this evening and post the results. as far as rarity goes I’ve got three in my possession but I’ve never seen any more here in the states. They look to be available in Europe. sKott

I converted mine with an AK 100 trunnion and folding stock. there’s a thread on here somewhere with my name on it. sKott

I have a double hook in my S-12. Bought it from Dinzag Arms. Never had any clearance issues.

Can you post Picts of the stamps and paperwork? sKott

I’m looking for a scanned copy of the Russian green cover saiga 410 Manual. Hopefully one that shows the adjustable gas system. thanks sKott

I still check in here. Mostly lurking. sKott

I’ve been looking for a Factory No 2 choke for some time and have not had any luck. We’re these even imported? Does anyone have a picture of one? I have one marked 0, 1 and 3. Like to find a 2 to complete the set.

Factory Saiga 410 chokes. #1 and #3 I've been looking for theses for a long while. Saw them on eBay brand new in the brown paper. Now I need to find a #2

There were 2 versions of the factory 10 rounders. Mod 1 had a side window with a round counter. Mod 2 was the more familiar solid body. I picked up 3 of each back when they were available through rusmilitary.

http://www.rusmilitary.com/html/ak_magazines.htmjust need to ask Oleg when they will be in stock.

Another vote for Tac-47. Call Keith, he will fix it up right. sKott

ok - I get it now.

You lost me at "The stock hits my charging handle". It can't do that...

Maybe this will help... http://forum.saiga-12.com/index.php?/topic/21197-skotts-saiga-12-c-conversion/?hl=skott I used a 5.5mm pin that is a 4 degree trunnion. your 4.5mm pin will be a 6 degree trunnion. the top long rivet and the center forward rivet should line up with the existing holes. Make sure you have the correct latch. I can send you a PDF template for the latch hole if you want one. I did the same on my .410. I have better pictures here (half way down the thread) http://forum.saiga-12.com/index.php?/topic/68678-just-got-a-410-me-likey/?hl=skott&do=findCom

To remember I came up tith the phrase: "One is hot, two is not" I also used a little white and red Brownell,s lacquer stix for the stamped lettering to reinforce which setting was hot. Both of these image are of my 12 but I did the same with my .410. sKott

Here's a better Photo...

The one I have is Russian (Izhmash) that I purchased from Oleg at rusmilitary back in 2008. The wrench flats should be on the end so you can use the factory wrench to take it off. (Never understood why some of the aftermarket ones put the wrench flats in the middle? How do you tighten it with the factory tool?)

I put one on Mine. It was not difficult. just be sure to use the 5.5mm pin 4 degree slant (Russian) trunnion for the AK100. sKott

I have 2 different versions of the 10 round Russian Mag I have 3 of these that are solid body and 3 of these with the counter window: I have not seen many with the counter window. They were listed as Russian when I bought them but they do not have any logos on them at all. Does anyone have any Info on them? sKott

Got to play with the camera last week. Enjoy the updated pict.