Jump to content

sKott

Contributor
  • Content Count

    310
  • Joined

  • Last visited

Posts posted by sKott

  1. I have a solution for this. 
    I have a small hole drilled for a pull pin .

    One less round. Push rounds down, slide pin across the brass, works like a charm.

    id post pictures but the choose file option does not seem to work.


    sKott

  2. These are Russian Aftermarket mags made by Polygon. 
    They accept 10 rounds and have Several windows on one side that act as a round counter with numbers stamped into the follower.

    I believe the footplate is metal. I’ll check the lugs and stuff with a magnet this evening and post the results.

    as far as rarity goes I’ve got three in my possession but I’ve never seen any more here in the states. They look to be available in Europe.

    sKott

     

  3. Maybe this will help...

     

    http://forum.saiga-12.com/index.php?/topic/21197-skotts-saiga-12-c-conversion/?hl=skott

     

    I used a 5.5mm pin that is a 4 degree trunnion. your 4.5mm pin will be a 6 degree trunnion.

     

    the top long rivet and the center forward rivet should line up with the existing holes.

     

    Make sure you have the correct latch.  I can send you a PDF template for the latch hole if you want one.

     

    I did the same on my .410. I have better pictures here (half way down the thread)

     

    http://forum.saiga-12.com/index.php?/topic/68678-just-got-a-410-me-likey/?hl=skott&do=findComment&comment=666502

     

    This is the mod for the trigger guard if using a regular AK one.

     

    http://forum.saiga-12.com/index.php?/topic/22906-factory-style-trigger-guard-and-selector-stop-modification/?&hl=SKott&fromsearch=1

     

    some of the vendors may be making these now

     

    sKott

  4. To remember I came up tith the phrase:

     

    "One is hot, two is not"

     

    I also used a little white and red Brownell,s lacquer stix for the stamped lettering to reinforce which setting was hot.

     

    skotts_guns_1414.jpg

     

    P1060890.jpg

     

    Both of these image are of my 12 but I did the same with my .410.

     

    sKott

  5. The one I have is Russian (Izhmash) that I purchased from Oleg at rusmilitary back in 2008.

     

    The wrench flats should be on the end so you can use the factory wrench to take it off.

    (Never understood why some of the aftermarket ones put the wrench flats in the middle? How do you tighten it with the factory tool?)

     

    P1010941.jpg

     

    P1010942.jpg

  6. I have 2 different versions of the 10 round Russian Mag

     

    I have 3 of these that are solid body

     

    S41010_zpsf71dc9f1.jpg

     

    and 3 of these with the counter window:

     

    S41010W_zps810e0912.jpg

     

    I have not seen many with the counter window. They were listed as Russian when I bought them but they do not have any logos on them at all.

    Does anyone have any Info on them?

     

    sKott

×
×
  • Create New...