sKott

I've heard about (or seen firearms platers that offer) Black chrome... is it the same as Hard chrome?

Norrell's Moly Resin... This is really good stuff.

I had one of those but sold it. I got it for my S-12C Conversion. Problem was that the Grip was about 1/4" longer than the pistol grip plate I had already installed. I did not like the un-sightly gap so it had to go. It would look killer if you did not have the grip plate installed. sKott

I can't wait to see the picts...

Looking for a PKAS-S optic. Would like "New" or Like "New Condition" Also the accessories would be nice (Cover, Adjustment tool, Manual, lense cap) See photo: Let me know what you have.

The rear plate will need to be trimmed I also had to file the plunger a little because after trimming the release on the plunger was even with the plate (no where for the hook to grab) This shot shows how the latch and plate should line up. If the plate is left too long it will not engage the hook at the tapered section. Hope this clarifies....

I had the same issue. The latch cannot go any further back or it will be in the mag opening. The solution I was given was to trim the buttplate and the plunger: Trimmed Plate Trimmed plunger. I was told that this is how they do it at the factory but have not seen any proof. But it does work. sKott

Factory 2 round mags are quite hard to find. I have a 2, 5 and 8. The 2 rounder was the hardest to locate.

I would make some more for the forum members if people need/want them.... Should i start a new list????? sKott

That's Doug Ford's site. I just bought some parts from him last week. I also ordered my Kobra Gen II sight for my S-12 as well. Make sure you email both his primary and secondary email addresses he will usually respond to the sbc address. sKot thx. skott, wheres the secondary address? tantal@sbcglobal.net tantal@avtomats-in-action.com Hey Skott, how much do they run on the websight? I paid $189.95 for the sight, $8.50 for shipping and Because I live in Texas I had to pay the $15.68 in State Sales Tax. Total of $214.13 Came with the sight and base, Batter

That's Doug Ford's site. I just bought some parts from him last week. I also ordered my Kobra Gen II sight for my S-12 as well. Make sure you email both his primary and secondary email addresses he will usually respond to the sbc address. sKot thx. skott, wheres the secondary address? tantal@sbcglobal.net tantal@avtomats-in-action.com

That's Doug Ford's site. I just bought some parts from him last week. I also ordered my Kobra Gen II sight for my S-12 as well. Make sure you email both his primary and secondary email addresses he will usually respond to the sbc address. sKot

I don't think I posted these in the pict forum net Saiga12-C Conversion Photos Family Photo: Saiga 12-C Conversion w/Kobra Red Dot, Polish Underfolder, Polish AKMN, Hungarian AMD-65 (In the works), CZ75-P01, Beretta 950 BS

I had a Saiga-12 member or two ask if I could make/modify a trigger guard and selector stop for their S-12 conversion. So I will be making a few sets this week. Will sell for $60 includes parts, labor and shipping. I will be ordering supplies on Wednesday afternoon. Interested members will need to pay by paypal on or before Wednesday morning (06-18-08). Post here and PM me for paypal address. Thanks - sKott

Be careful when you remove the rail. I may want to buy it off of you for another project.

Thanks everybody... Last thing I have to complete is Hrad Chrome plating the carrier, BHO Lever, Hinge Pin and folder lock. I will have this one and the Carrier from my AMD 65 build done at the same time. (Hopefully in the next month or two). sKott

I use to have one of those but it is long gone now. have you thought about one of these? About $25 in Parts an 30 minutes with a file and a hacksaw. I posted a photo tutorial on here somewhere.

Remove the selector, Bend the selector slightly inward to create more tention between it and the receiver. That's what I'd do...

Cheapest? I mean all the vendors do good work, but you're paying for their professional skills. Doing it yourself is the CHEAPEST if you take your time and are careful. I have to disagree. I know i spent a lot more money converting it myself over just buying one from Tromix. The only reason I did not go that route is that no one really offered exactly what I wanted. (a 12C Clone) and I really wanted to do as much as possible myself. I do agree with the take your time and be careful part. I think everyone here has seen enough botched conversion posts.

Item sold on another Forum.

Price Reduced to $45 Shipped

This is an AMD 65 wire folding stock complete with trunnion, locking hardware and sling loop. The kit it came from appears to be unissued. The folder is tight and has a solid lock up in the closed and opened positions. Rubber pad is in excellent condition. This still has the factory sling loop attached to the receiver. Please PM me if you need any additional photos. I am asking $45 shipped. I'll even throw in a couple free Izhmash logo decals. This item is cross-listed on other forums the first "I'll take it" date stamp gets the folder. Not interested in trades - I need a little cash to start

$1100 is a steal..... Mine is a comversion using as many russian parts as the law allows. I added it up the other day and Parts, Labor and accessories (Factory Mags, Russian Sling, Kobra optics and an ACE Case) I have around $1830 invested. I don't mind though. I had to collect the parts and piece everything together for about 6 months and for me that's the fun part. (Still wish I had the Law enforcement only stamp for the extra evilness) Things are only worth what people will pay for them. I really never intended to spend what I did on my conversion but once you jump in with both fe

That's the one superhawk138!!! PM sent... Thanks sKott

Just what it says. I am looking for a factory Saiga BHO lever and spring from a 7.62 x 39 rifle. I know many of you remove this feature, I would like to experiment with one for another project. I'll pay or trade you for a couple Izhmash Decals Thanks - sKott