obiwanbonjovi

I plan on heading up there the 2nd lets make it a date. I don't think pumpkins are subject to the paper targets only as they are extremely biodegradable. Also don't forget to call your state senator and ask them to support SB 610

it is an armory usa stock, they haven't been made in quite some time. I believe armory usa was either bought out by or changed their name to arsenal usa. Centerfire has complete sets of them for $50 http://centerfiresystems.com/STKAKA-BUL.aspx be aware though that the centerfire sets have been previosly exported to bulgaria, and re-imported with the usa markings scrubbed. Therefore they count against you as an imported part.

I just got an email yesterday stating my order shipped.

With the factory LRBHO you should never try to release bolt with an empty mag installed, with no mag or a full mag it works wonderful. The bolt release is connected to the BHO via a long sheet metal lever. At the end of the lever that contacts magazine follower the sheet metal is on flat, and therefore flexes easily. When you fire your last round and the follower pushes up on the lever it is met with little resistance and easily engages BHO, Reversing the operation and trying to depress magazine spring the lever is met with quite a bit of resistance from the magazine and the lever flexes,

thanks, we ran these at .770 I didn't notice any issues from testing so we went with it. If you don't mind my asking, what size did you settle on.

Assuming the shooter is right handed, here is a list of pros and cons right folding Pros: Carries tighter to your body when slung. Faster deployment of stock thinner profile when folded(stock and charging handle on same side) does not interfere with left side optics Cons: Obstructs selector, charging handle, and trigger while folded(usually can all be manipulated, but less easily.) Left folding Pros: Unfettered access to controls while folded(trigger, selector, charging handle) Cons: Does not carry as well slung with the folded stock against your body Slower to deploy, uses

as far as the deburring goes the first run did get a little bit rushed, the new ones have a nicer finish, Iwould be willing to replace anyones that was not happy about that. I will be looking into the debris issue, I had not experienced it never had anyone near me getting hit, I will se what I can discover.

Cool deal. Do you know what I should fill it with by chance? I know I messed up with the ATI stock.. Maybe I can use it on my saiga .223 though! I wanted an adjustable butt pad and the folding ability. Nice website btw, I didn't see it before somehow when I was searching around for products.. if only http://www.bonesteelarms.com/Ak-Saiga-Folding-Galil-style-stock-AKFSGL.htm this was adjustable! I suggest automotive 2k primer surfacer for filling in the extraneous markings, works great. Our galil style stocks are not adjustable but our m4 stocks are. If you really want folding a

Other than the serial number, you can do what you want with the markings. I think you made good choices other than the ATI stock, those are garbage.

Always glad to support a fellow businessman/forum member. Thanks for doing such amazing work. We will offer some as promo items, but the more we sell the faster we can bring you new and exciting products.

almost all grips will fit milled receivers, but the grip plate is riveted on the bottom, so it is possible some aftermarkets will not fit.

The one I saw was seam welded the entire left side and the bottom. looks easy enough to cut, but getting the finish 100% perfect might b tricky.

I would lap all the moving parts before I monkeyed with anything else. You'd be amazed at what 15 minutes and some valve grinding compound can do.. I love your vepr it is gorgeous btw.

I have to admit, I got a little teary eyed listening to whos gonna fill their shoes

If I could sing like I wanted to, I'd sing like George Jones He will be missed.

Finally back in stock. To all those who waited so patiently, I appreciate it and your wait is almost over. we should have most if not all backorders shipped by the end of weekend.

Or more likely, they are brilliant and will use this as another excuse to convince the public that rights are bad. I imagine it something like this: "See what happens when you have rights, this is what you get. Because of your precious constitution we can't properly deal with this terrorist".

They likely wont ever break unless one of them comes loose,,one of them is defective, or one of them is overtorqued. The only exception to that would be if the stock were to suffer a hard blow directly up or down to the mechanism which could shear the bolts, the bolts are incredibly strong under tension, but not so much under shear. However, any way you look at it you have added 4 more points of possible failure. If one bolt fails, whether it is due to installation error, defective bolt, or just the right impact, the entire unit will fail.

you do not have to cut the tang with this. these look like a$$ compared to the ak-100 stock, the adapter block is long and bulky, and because of the long adapter they have a ridiculously long LOP no these will not accept the poly folder, the latch is moved from the rear of the stock, to near the front, the triangle folder has a tab welded on for the latch, the poly one is solid plastic where the latch would need to be.

That was only a problem with one days shipments, we stopped using the oversized screws right away. We have been through several different types of screws, and only now have ones we love. They cost us 8 times as much, but the new screws are beautiful

look in the members only discount section to find the secret code. http://forum.saiga-12.com/index.php?/topic/77686-5-off-all-saiga-products-at-bonesteel-arms/

they are not connected, the video is a demonstration of how with the awesome vepr extended safety you can easily manipulate safety in one motion while unfolding stock.

It's all ok because anyone without a badge is scum, and using gestapo tactics on the scum is what led them to the bomber. Or wait, was it a citizen that reported his whereabouts? Couldn't be, everyone not in uniform must've been aiding and abetting

I find it rather odd and rather stupid that they redesigned the buttstock attachment. To use anything other than the stock it comes with you would have to replace the trunnion, or wait for proprietary aftermarket stock. To me that would be the deal breaker. he horrible looks of the casting on the carrier(could just be pics) kind of scares me as well.