mob

well the guy called me this morning, apparently he had been camping since tuesday, he said he would ship out my money tomorrow

it sold for 900, i wanted 1100 for it, and i never said i wanted 1400 for it

well its 4 days later and i have yet to recieve an email from him (emailed twice) and left a message on his phone number listed thru gunbroker . dont know if the guy sent the money or not. first email was right after the auction outlining what was owed and everything, and then sent an email about a day or two ago asking if he got the first email. and no response to either, even checked my spam folder of aol just in case it might of went there. so i have no idea of this guy has sent payment or not. and i checked his gunbroker rep, and shows he bought a shotgun barrel the 13th of this month so i

four minutes left as of this message

only two days left, sucks its only at 900 , eh oh well

well guys, its on gunbroker http://gunbroker.com/Auction/ViewItem.asp?Item=102456530

that would be a big negative good buddy, NOT a street sweeper, heres a hint, that silver thing you see laying next to it, thats the round for it

so back on subject, can a few give me a high/ low / what it would sell at pricing, ive got one unnamed possible buyer on here but dont have a price to give him , or that if he does not buy it i would put it on gunbroker and here

and see, ya have it wrong, i have this this and this to raise some hell

i have the stock foreend that comes with it, i was originally going to put the, i think omega front end on it, but they wanted like $200 for the rail and then i guess they stopped making it or it was as available as the infamous Shrike for AR15s STOCK FOREEND IS INSTALLED ON IT (sorry to yell, just so anyone scanning can see the note) , just dont have any pics of it since i put it back on, these pics were right after the conversion

here are pics and no your not dreaming, deep in my heart i feel its time to thin out one or two to get another toy(dont worry its not a fire sale, ive got 5 other 12ga shotguns), i mean for godsakes i own 18 rifles and at least 10 pistols that are in the safe. and im going to buy more guns in my future, but its like i just bought an older jetski to go out with friends since they have a Tige wakeboat, and having this little chopper will allow me to work with metal again and have a conversation piece, i mean im only 24, i only got 5-10 years left before i gotta settle down and have k

just became gold

let me find the link to contribute and i will

sorry, didnt know, dont use the site much, my appologies, not trying to fish for buyers at all

well gents, im selling some of my toys to buy other toys, specifically a mini-chopper http://www.kikker5150.com/indexb.html , something small and fun. below is right now what i have into it is: the shotgun itself (19" threaded barrel, non sight rib) ACE Skeleton Stock ACE Folder Mechanism ACE "cut the tang" Flushmount block TAPCO SAW grip TAPCO Single Hook G2 Trigger, Hammer and Disconnect Bolt Catch still installed and functional Stock Mag only plus what it took me to get converted and refinished. it is not a tromix conversion what should i advertise this at, if ya can g

yeah the sad part is that it took me longer to work all of the trigger guard stuff than it did to convert the rest of the rifle

well yall, i thought i would post my conversion and get some input on it. with the info that i found here and all, i dove in and converted it from the rifle to the PG setup. at first i was going to send it off to get converted but then once i got into it, it didnt seem so hard, at least till i got to the end. pretty much the tapco SAW grip and G2 FCG and ACE folder, stock and internal cut tang block. i welded and ground down the old holes in of where the old pins were now where it gets interesting is that i got dremel happy with my stock trigger guard cause i was trying to get to t

well i used a rough cut and a finish cut flat file on the block, took off a 1/16 and it fit in there with no freeplay, got my stock installed and everything and my conversion done, looks nice as hell. funny thing is that my refinish on this whole gun cost me maybe $6 but came out looking like i duracoated it black, but i took the reciever down to bare metal (including the finish that came from it factory) using laquer thinner and scotchbrite pad.

well hell i have had to hand fit and file most everything else on this gun, aint no harm in the adapter block.

hi been lurking here and bought a saiga a few weeks ago and with the help of hte knowledge here, i am converting my saiga to side folder and 922r compliant and even did a trigger guard that i have not even seen on here before, well in another thread i will go over what i did and all for my conversion and the such well today my SAW grip came from JMacken (great guy to deal with) and my "cut the tang" block from ACE ltd/riflestocks/J&T also came today, so i was happy as all hell to get this gun back together. well i go to install the block and it stops, i look, and its hitting the ro

i still say 2 and 5 are the pins that need to be knocked out, 3 looks like its the crosspin retainer for the valve selection pin

some pics of my conversion (having to do quick reply to get posts, cause when i try new thread it shuts down IE, will have seperate thread later got the trigger guard made up and welded up today and ground down and ready for paint, so far i have not seen it done on the saiga forums yet but its an innovated different way. hopefully tomorrow i can get the trigger guard rivets in. and then sometime next week my ACE folder block should be in. yall would be proud of me, even went and oil tempered the steel after i was done welding it. ive learned a few things from a 75 year old autobody guy

sorry to bring up an old thread but its interesting info and i was lucky enough to find a barely fired safe queen of a mak90 for $300 from a friend of mine

oh i know that feeling, snapped one of the smaller HF punches driving out the rivets out of the reciever, sucked really bad

now ya have, looks like to me pins 2 and 5, looks like 1 is not there and 3 is the crosspin that holds in the gas selector plunger