Jump to content

Wildblue

Member
 View Profile  See their activity

  • Content Count

    11

  • Joined

  • Last visited

 Content Type 

Posts posted by Wildblue

  3. Converting my .308

    in Saiga Rifle Conversions

    Posted

    I picked up a .308 Saiga recently. It's a 22in barrel model, came with wood stock..shoots real well. I've been looking at the conversion instructions that were used on a '39 and there are a few differences from my .308 that have me puzzled. My trigger is one piece without a separate axle to drill out. Looks like there is no hole precut for the pistol grip nut, there are two spot welds in the plate on the bottom next to the trigger.

     

    Has anyone put together a set of instructions for this model Saiga? I could start grinding and probably get it done but it would be better to have more info.

     

     

     

    Thanks, Alex

     

    With the Saiga .308, the factory FCG can be removed without drilling. Just disengage the retaining wire and push the pins out. Once the factory FCG is removed, look for the PG nut hole from the inside. It may or may not be there, but it is much easier to tell looking from the inside with the factory trigger removed. If the PG nut is not there, you will have to cut it yourself, or you can use the special trigger guard from SaigaTech.

     

    Removing the bottom plate is simply a matter of grinding/drilling spot-welds/rivets and popping the plate off with a small cold chisel.

     

    For a replacement FCG, I highly recommend the .308-specific FCG from Dinzag. Good luck!

     

     

    Okay I have a question. Is moving the trigger guard just too get the pistol grip in? I installed a M4 6 Position Collapsible stock set with pistol grip from Mississippi Auto Arms, no mods required.

     

    http://www.mississippiautoarms.com/index.p...products_id=124

     

    If I want to install the dinzag FCG do I still have to move the trigger guard or will it drop in? What I really need to know the purpose of moving the trigger guard. I did research the forum but some reference the FCG and some the pistol grip.

     

     

    Most people are not happy with the "elongated" trigger setup on the 308 rifle. You utilized the combo butt stock with the PG incorporated. With that, you CAN'T install the modified tirgger setup (forward) unless you've got R E A L L Y LONG FINGERS.

    The springy/sheet metal trigger on the factory 308 is one of the reasons most convert to a standard PG, modified FCG (forward), modified/moved trigger guard, etc. etc. etc.

     

    Some even leave the standard butt stock on, with the newly installed FCG and PG and moved trigger guard..(instead of installing a new collapsible or folding stock)....

     

    Luck

     

    Why do you have to move the trigger set up forward to install a Dinzag FCG? What prevents just switching it out with the existing FCG? Is it different size or make contact with something unless you move it forward?

  4. Converting my .308

    in Saiga Rifle Conversions

    Posted

    I picked up a .308 Saiga recently. It's a 22in barrel model, came with wood stock..shoots real well. I've been looking at the conversion instructions that were used on a '39 and there are a few differences from my .308 that have me puzzled. My trigger is one piece without a separate axle to drill out. Looks like there is no hole precut for the pistol grip nut, there are two spot welds in the plate on the bottom next to the trigger.

     

    Has anyone put together a set of instructions for this model Saiga? I could start grinding and probably get it done but it would be better to have more info.

     

     

     

    Thanks, Alex

     

    With the Saiga .308, the factory FCG can be removed without drilling. Just disengage the retaining wire and push the pins out. Once the factory FCG is removed, look for the PG nut hole from the inside. It may or may not be there, but it is much easier to tell looking from the inside with the factory trigger removed. If the PG nut is not there, you will have to cut it yourself, or you can use the special trigger guard from SaigaTech.

     

    Removing the bottom plate is simply a matter of grinding/drilling spot-welds/rivets and popping the plate off with a small cold chisel.

     

    For a replacement FCG, I highly recommend the .308-specific FCG from Dinzag. Good luck!

     

     

    Okay I have a question. Is moving the trigger guard just too get the pistol grip in? I installed a M4 6 Position Collapsible stock set with pistol grip from Mississippi Auto Arms, no mods required.

     

    http://www.mississippiautoarms.com/index.p...products_id=124

     

    If I want to install the dinzag FCG do I still have to move the trigger guard or will it drop in? What I really need to know the purpose of moving the trigger guard. I did research the forum but some reference the FCG and some the pistol grip.

  8. A few questions on changing S.308 FCG

    in Saiga .308

    Posted

    I've searched the forum for Saiga .308 FCG information and I want to get confirmation on a few things.

     

    First, if I get the $85 RSA adjustable FCG for the VEPR .308, will it be a drop in install with no drilling, grinding, etc? Any other "plug and play" FCG suggestions? Tromix?

     

    Second, will standard TAPCO AK Trigger/Hammer Axis-Pin Retaining Plate work in the S.308?

     

    Last, what is the best solution for retaining the pins?

     

    I already have Surefire mags and an M4 stock kit.

  9. Thinking About Reloading

    in Saiga .308

    Posted

    Hey all I am definitely interested in the reloading process and I'm not exactly sure what all equipment it takes and the cost of it. I really would like to reload .308 & 7.62x39 for rifles, and .45acp for pistols. Approximately what would be the cost of the equipment for reloading (I'd prefer the high quality stuff that will last for years hopefully), also what parts would i need to buy and what brands do y'all recommend? I hear Dillon is really good but i have no experience in the matter, Anyways any info would be much appreciated!

     

    Thanks Again,

    Kaiser

     

     

    You can't go wrong with RCBS. I've have the same equipment for over 30 years.

     

    Everything you need is right here:

     

    http://www.rcbs.com/

  10. Hello all, I just registered

    in Saiga .308

    Posted

    I'm picking up my new 16" Saiga .308 tomorrow! I use to have a nice M1A1 but I got away from shooting and reloading for a while and a friend of mine really wanted it so I sold it to him. I have a ton of .308 ammo and brass for reloading so the Saiga .308 was an obvious choice for me.

     

    I intend to get some hi-cap mags and and M4 stock.

     

    I also have a 30.06, a 22-250, .222, 357mag, 38 spl. and a new Kahr PM 9mm for my CCW.

×
×
  • Create New...