Search the Community
Showing results for tags 'ak-47'.
-
Hey guys so i picked up my new saiga today. Very happy with it but just had one question about something. Look at the picture and see how the spring doesnt sit flush..is this normal? I have not seen this before. All the hammer springs I see sit on the trigger flush. Just wondering.
-
So what does everybody think about the quality of a converted Saiga Ak-47 versus Romania, Egyptian, Yugoslavian, and all other Ak's?
-
If I grab the firing pin with tweezers I can turn it side to side quite a bit..is this amount of free play normal?
-
Hello everyone. So I ordered a bullet guide for my 7.62x39 and one tapco 30 round mag. I am also going to file the magazine catch on the rifle instead of modifying all my ak-47 mags..My question is if the tab on the tapco mag is the same thickness as the tab on a steel ak mag? So if i go and file the mag catch lever on the rifle to fit the tapco then go and get steel mags i want the steel mags to fit too..like i hope the tapco mags tab isnt thicker to the point where i file the mag catch lever on the rifle to fit the tapco but the steel tabs are thinner? you know what i mean kinda? please
-
hey guys i was wondering if anybody knew where to get a linch top cover? -
Heres my new saiga..Ive got about 400 rounds through her already..this thing is awsome..very accurate as well..shot 2.5 inch group at 150 yards with iron sights..Whats up ar fans? Aint got sht on me. ................And yes..i am in California.
-
Hey everybody i know it is actually bad to dry fire some weapons, but is it bad to dry fire a Saiga rifle or an Ak-47? I assume the answer is no. Wutcha think? ...and this is my badass Avtomot Kalashnikov.
-
Sup guys just wondering if theres any body on the forum that lives in Humboldt County..
-
so i was just wonderingif this gap here on the block that holds the rear sight and locks down the gas tube is normal.. see where it goes into the front trunnion..on my other ak its in all the way but on my new one its got like a 1/16th inch gap..rock solid though.
-
Here's my Saiga... tapco G2 fire control group mako shock resistent stock surfire magazine chaos quad rail magpull sling magpull forward grip s.a.w. pistol grip wolff extra power recoil spring black jack recoil buffer
-
I'm a relatively new firearms enthusiast (~2 years) and well new to Saiga rifles and shotguns, AK-47/74 variants, and the conversions between the 2. I was hoping to solicit some advice based on what little I know of these platforms. I've been looking at the Saiga-12 models and found this at Atlantic Firearms. It seems to be this model from Legion USA. I find the magwell and the LRBHO features attractive. I want to know if these are reasonable prices for Saiga-12 with these options. I've been looking at some of the custom items at the sponsor sites, but I do not know enough to know i -
Looking for an unconverted 7.62x39 Saiga. MUST HAVE DIMPLES! New or used, doesn't matter.
-
1. US made/marked gas piston for AKS-74U: $20 + $6 S&H 2. US made/marked gas piston for Tantal: $20 + $6 S&H 3. accurizing SKS gas tube. This was supposed to fit Russian SKS but was never installed: $20 + $6 S&H. Terms of payment: USPS MO. Email: dydacupuncture at gmail dot com Picture(s): -
Saiga .308, lightly used, well cared for. Adjustable stock, Tapco G2 trigger, Krebs retainer plate, 2-25 round surefire mags and 1-10 round factory mag. $800.00 shipped. Regards, Calen Smith
-
I have a great Yugo underfolder. Standard Century model parkerized with black polymer furniture, Red Star Arms retainer plate, slightly corroded piston(as many Yugo's have), slant muzzle brake. I've put around 300 rounds through it with no problems. Great gun overall. Looking to trade for another AK-47(WASR, etc.) but with a standard combloc metal wire side-folding stock. Just want something that runs fine with no issues, no canted sights, detachable non-welded muzzle brake/flash hider and minimal mag wobble, prefer Romy wood pistol-style foregrip, but not a big deal if plain wood or polymer. -
Which brake is the best at reducing muzzle climb for follow up shots, the ak-74 brake or FSC47? I have a factory threaded barrel. I have cut away the barrel shroud to use an FSC47, but I want to replace the gas block and fsb, and so far it looks like my only option for a fsb is an ak-74 type with 24mm thread. I could cut off the front of the fsb for a more traditional akm fsb and use the FSC47, but it seems like a waste. I could use the 24mm threads with an ak-74 brake (sized for 7.62) but that seems like a waste of the factory threads. I have all the parts so the cost isn't a factor, jus
-
WTS AMD65 demilled kit(includes original barrel) and various AMD65/Galil parts/accessories. 1. AMD65 demilled kit, plastic handguard, folding stock, matching bolt/bolt carrier, original barrel, folding stock, etc. $325 + $25 S&H http://i1204.photobu...T0045Medium.jpg 2. wooden upper handguard(model?), includes gas tube $30 + $10 S&H http://i1204.photobu...T0051Medium.jpg http://i1204.photobu...T0052Medium.jpg 3. AMD65 (used) wooden lower handguard, $25 + $10 S&H http://i1204.photobu...T0042Medium.jpg http://i1204.photobu...T0044Medium.jpg 4. AMD65 (new) US m
-
From the album: Underbarrel Launcher Project
Two of my rifles side-by-side. Romanian 7.62x39 and a Russian 5.45x39...© copyright my foot up your ass.
