Search the Community
Showing results for tags 'akt'.
It's pretty easy, actually. You'll only need to mod the ALG hammer before installing the kit per ALG instructions. As you can see in the pics, the receiver for the VEPR has a reinforcement bar across it near the hammer pivot pin. Both the 'tail' on the ALG hammer and the body of the ALG hammer interfere with this pin. Grind the 'tail' off to make the hammer round in the area of the pin hole, and notch the hammer body similar to the factory hammer to clear the pin when the hammer is resting on the firing pin with the bolt forward. My pictures are pre-polishing/painting, so don't bother tel
It took about 2.5 hours, and was actually pretty easy with only material removal required. Works fine after 100rd through it and no trigger problems or multiple-fire conditions. PowerPoint of the Mods NOTE: If you do this, you are taking the risk that it won't work - with all that the warning entails with regard to potential injury/death from a malfunctioning firearm. Since I don't know your skill level, I make no claims that you will have my success/luck. That, and with the variation in Saiga construction, your mod requirements/mileage may vary. If you are not confident that you can do th