Search the Community
Showing results for tags 'ammunition'.
Found 4 results
I apologize in advance for the lengthy post. I'm a Saiga newbie and trying really hard to not become frustrated on the ammo front. I'm looking for current advice on 3" ammo for my lightly used Saiga .410. For my rig, I have: Two 15-rd 3" SureFire Gun magazines One 30-rd ProMag 3" Drum that works well One 4-rd 3" factory magazine I had a heavy handful of 3" Remington and Winchester game loads and I burned through them verifying the weapon and all the mags worked properly. Everything worked well, with the gas setting on 1. So lately I've been searching for .410 shells from online retailers (local shops don't carry hardly any 3"). And I've scoured most of the posts here for research, but the info is scattered, inconsistent, and much of it is several years old. So here are my questions that, hopefully, someone with a .410 can advise me on: 1) Best ammos Does anyone have 3" shell recommendations for: - steel shot (game/target) - buckshot - "plinking" - slugs - And what's the final word on Winchester PDX1? 2) Best 3" .410 retailers I've been searching all the regulars (AmmoToGo, Midway, Cabela's, Sportsman's Guide, CheaperThanDirt, BulkAmmo, Natchez) none of them have a terrific selection of 3" in-stock. And I'm SHOCKED at how expensive .410 has become. Who's your go-to? 3) The 2-1/2" shell dilemma With my hardware, will they work? Can they work? Do any specific shells work? I ordered a case of cheaper Italian (B&P) game loads for low-cost shooting just as I get a feel for the weapon, and wouldn't you know it, the things won't feed properly. It seems the diameter of the brass is too wide (yes, wide) to consistently slide into the chamber with a manual cycle. I'm running a 75% failure-to-feed rate with them. The shells are also too long for the 15-rd mags (they measure a full 2.75" crimped). The drum took them, but roughly 1 in 3 won't even fully slide in the chamber from a manual cycle. I've complained to Natchez and to B&P, but I'm not holding my breath for a refund. I also made a foolish error and accidentally ordered a case of 2-1/2" Winchester PDX1 shells instead of 3". Is there any hope for me making use of these? Or am I SOL? I'd be willing to buy 2-1/2" mags (if I can find them), but aren't even sure they'd work with my weapon or with PDX1 shells. After the PDX1 mishap and the bunk Italian shells, I'm gun shy (pardon the pun) and can't afford to lose any more coin to shells that won't work. I never thought the ammo side could be so frustrating. I really was excited about finally getting a Saiga .410; but with all the ammo mishaps and risks of losing even more money, the whole experience has become a real buzzkill. Many thanks in advance for your guidance and expertise.
I had a debate with my buddy about steel vs. lead shot. I've read all the topics on the different pellet counts, dispersion patterns, and velocity differences. Now, I'm primarily concerned about barrel wear. Through my research, lead is far better for barrel life. I simply want to know your opinions and experiences and any advice. So... What do you shoot? Thanks guys.
Found this on the Century Arms website. They've started importing Sauvestre Slugs from France. $50 for a 5rd box of slugs... This better come with a handjob from a really hot french chick. Link deleted due to forum rules. You can find it on the Century Arms site. The plain lead ones are "only" $40 a box.
I saw Aim Surplus sent out a flyer selling Bulgarian surplus 7.62x39mm ammo by the spam can. Does anyone have any experience with this stuff? I'm especially interested about bullet weight and muzzle velocity. With the exception of its copper washed cases, the other features--bimetal jacket, lead core, corrosive primer--remind me of Yugo surplus.