Search the Community
Showing results for tags 'stain'.
Found 2 results
I got couple of unfinished "firewood-quality" stocks from the Centerfire's Veprs and wanted to experiment with doing some unusual colors... So I browsed around for awhile and mostly found kinda bland shades and nothing that really "pops" to the eye, or finishes that would be too smothering and covering up the grain; then I found these Craftsman's Blend by JW etc. stains: I think Midnight Blue, Teal Blue, Caribbean Blue with deep gloss to semi-gloss finish might look pretty good. I am a fan of deep candy-like finishes and darker shades/colors so I would definitely try Chianti as well- but that seems more traditional. Anyone tried staining and varnishing wood in more unusual colors? How did it come-out? Edit: I also emailed the JW etc. ... they should be getting a new shipment of stains this September. They guy seemed also pretty responsive. Event sent me a quick higher-resolution pic of the stains:
Hi people. There are many things that I am ignorant about.fine woodwork is nearly one of them. So I have Bulgarian Surplus AK 74 wood that I bought from MarkW1. I bought two sets. One was refinished and is beautiful, I just need to make a matching wood pistol grip and clone his finish. The other one is the what I want your help with for now. This is going on a gun with a magwell and a very non-standard grip. I intend it to be suitable for 3-gun or similar, whether or not I ever get the chance to take it to an event. Since the style of traditional wood doesn't really match the modern features on my gun, I wanted to deliberately go non-traditional with my colors to emphasize this. I had thought of going with a light green stain or color matching the blonde buttstock to the hazel colored fore-end, and staining the grooves and contours in green. Now I think I am inclined to go with my first plan and Stain both Grey/ Charcoal, and make the grain pop as much as possible. I want the parts to match as much as possible, and am ok if dings get highlighted. This will be a gun to use, so I will apply a durrable finish and aim more for matte than gloss. I am open to all of your suggestions. I cleaned all the shellac off with denatured alcohol and sanded first with 100 grit and then 400 on both. I may need to get some intermediate paper and remove some crossgrain scratches that showed up on the forend, then redo the fine paper. I will do steel wool too if that is advisable, but I was just working with what I had onhand. The process I expect to do unless you guys recommend something better is as follows: 1) touch up the sanding a little better, moisten them with a rag of warm water, and sand a little more. Then 0000 steel wool. 2) get some dye at least black or grey, and brown if needed to get the stock to match the forend. I read here http://milsurpshoote...ay#.TxvWDW9rN2A that dye is better than stain and more controlable. a) do a light coat on the stock only and let it soak in of brown if needed.Repeat until underlying tone is comparable to the other piece. use black or grey stain to get an over all Charcoal tone on both pieces. I want the grain to stand out if feasable. Do this in multiple stages so as not to over do it or get mismatches since the wood is different. 3) after the above seems good and dry, Use a paint brush to apply a durable urethane finish. Aparently the thing to do is several coats before it cures fully and steel wool near the end. Here are pictures for reference: Stock Before: I am told that beech was a common wood for Bulgaria. This appears to be beech. Fore-End Before: I do not know what kind of wood this is, but it reminds me of mahogany but harder and darker. Both together after sanding: Close ups of grain (The beech looks really good, and I wish they matched): More pictures in reply: Continued even further: