Rejoice 0 Posted January 1, 2020 Report Share Posted January 1, 2020 (edited) Hello, I am new to customizing firearms and I got a beautiful wood set for my saiga 7.62x39. Was able to get the front piece on no problem but the receiver on the back of the rifle won't come off so I don't know what I need to do to get the butt stock on? As you can see I marked the receiver with blue tape. I imagine muscling it off would damage the gun, anyone have any thoughts of how to do this easily? I don't know how to get the end of the base stock off so I can put the new one on. Thanks Edited January 1, 2020 by Rejoice Quote Link to post Share on other sites
Rejoice 0 Posted January 1, 2020 Author Report Share Posted January 1, 2020 Quote Link to post Share on other sites
jerry52 893 Posted January 3, 2020 Report Share Posted January 3, 2020 the plastic stock with the blue tape has to be removed from the metal receiver. it will slide right in 1 Quote Link to post Share on other sites
IndyArms 10,186 Posted January 3, 2020 Report Share Posted January 3, 2020 There's a screw under the recoil spring. Remove the receiver cover, then the recoil spring and guide, and there's your screw. Might be one I the bottom of the receiver as well. Once the screws are out... A side to side wiggle will work the stock part out of the receiver. Get on it. Don't be bashful... It may take some tweaking. 1 Quote Link to post Share on other sites
bagman 2 Posted April 2, 2020 Report Share Posted April 2, 2020 Where did you buy the wood furniture? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.