llbeen 0 Posted February 17, 2020 Report Share Posted February 17, 2020 Mounted a master mount siderai (from AKOU)l to my Ishmash Saiga 12 today. Had to grind quit a bit (using a dremel) on the inner face of the mount to accommodate the large heads of the 2 rivets on the l side of the frame. It took a bit of grinding to clear the heads, then it turned out I still could not get the hex heads of the cross struts to fit flush into the side rail body. Discovered that the front cross strut was just half mil too long. Ground that down slightly to allow flush fit. Sooooo... cordless dremel tool was essential. Took longer and several fittings to finally work. Once it is on it is solid. Blue loctite on strut fasteners. Quote Link to post Share on other sites
gunfun 3,931 Posted February 17, 2020 Report Share Posted February 17, 2020 Pics? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.