Butts410 0 Posted March 16, 2020 Report Share Posted March 16, 2020 (edited) Hi all, new to forum but I just have a couple of questions. Used the search bar previously to figure some stuff out. I recently cleaned and lubed my saiga .410 and I cleaned the puck but I’m having a hard time trying to justify which side of the puck goes towards the barrel end of the shotgun? Should be fouled end Of puck towards barrel right? Cleaner end towards the stock? Also, I replaced the gas plus and threaded it down to the 1 setting, the the gas bolt has some some twist play left to right(tighten and loosen) Maybe a 1/32” almost like it’s allowing for adjustment before I depress the pin down? Threads nicely, just wondering if it has the play like that to allow for turning the gas setting easier? Will the wiggle allow for any issues when using the weapon? These are all stock parts by the way, thanks for your time! Edited March 16, 2020 by Butts410 Quote Link to post Share on other sites
IndyArms 10,186 Posted March 26, 2020 Report Share Posted March 26, 2020 Dirty side of puck towards gas block. The gas adjustment should be all the way in till tight, then loosen to the first click. Which SHOULD be the low gas setting, loosen one more click to the high gas setting. At least that's how i remember it from about 15 years ago... Lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.