highpockets 1 Posted March 27, 2020 Report Share Posted March 27, 2020 sorry if this dosnt go here,but it didnt look like to many post were being made in the section for this gun. I got a russian/RWC AK47 in a trade with no clip. It has bullet guide installed so I got clips from tapco and magpul and some military ammo. clips snap in fine. wont feed the shells.Just slides right over the top with the magpul. tries to feed with the tapco but hits bullet guide. neither seem to catch the back of the shell.. Any ideas ? I tried searching on here for help,but I am not computer savvy and the list included every word in my search and was to long to look thru. How do you narrow it down? I tried the quotation mark thing and that didnt seem to work.. Quote Link to post Share on other sites
highpockets 1 Posted March 27, 2020 Author Report Share Posted March 27, 2020 shells dont seem to be high enough in front/wrong angle.....one pic at rest,other pic, against the guide Quote Link to post Share on other sites
jerry52 893 Posted March 27, 2020 Report Share Posted March 27, 2020 do the mags snap in real hard? Also not all installed bullet guides work ,I had to make my own. 1 Quote Link to post Share on other sites
highpockets 1 Posted March 28, 2020 Author Report Share Posted March 28, 2020 no..snap right in place..once you get them all lined up right.. Quote Link to post Share on other sites
jerry52 893 Posted March 28, 2020 Report Share Posted March 28, 2020 all lined up right? I am not sure what you mean Quote Link to post Share on other sites
highpockets 1 Posted March 28, 2020 Author Report Share Posted March 28, 2020 it snaps in fine. just snug on sides. not problem tight,just snug. no problem as long as it goes in perfectly straight. then snaps right in good and tight. no slop.. Quote Link to post Share on other sites
highpockets 1 Posted March 28, 2020 Author Report Share Posted March 28, 2020 here is what it looks like with the slide pulled all the way back. the shell can not come up. What i wrong ? I guess I need to go see how to take this thing apart and put it together... Quote Link to post Share on other sites
highpockets 1 Posted March 28, 2020 Author Report Share Posted March 28, 2020 Fixed Quote Link to post Share on other sites
Capt Nemo 882 Posted March 28, 2020 Report Share Posted March 28, 2020 Bet the bolt was ahead of the carrier and not cammed into it. 1 Quote Link to post Share on other sites
jerry52 893 Posted March 29, 2020 Report Share Posted March 29, 2020 Good on you. Now Shoot the sucker. Quote Link to post Share on other sites
sjgusmc21 850 Posted April 1, 2020 Report Share Posted April 1, 2020 Well done. I had a blast converting my Saiga, really do miss shooting it. Oldest daughter is about ready to do so. Quote Link to post Share on other sites
jerry52 893 Posted April 1, 2020 Report Share Posted April 1, 2020 best thing I ever did was to do the mag conversion on my 223 and it works great. It will run any mag that will work in any ar 15 Quote Link to post Share on other sites
highpockets 1 Posted April 10, 2020 Author Report Share Posted April 10, 2020 yes,I just didnt do enough looking before I started asking questions. Figured it was jacked up by previous owner or a common problem and I dont know anything about them,so I started screaming help....Thanks. I have ordered some goodies,so it begins........ Quote Link to post Share on other sites
jerry52 893 Posted April 10, 2020 Report Share Posted April 10, 2020 "AND SO IT BEGINS!" 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.