Can a Saiga be milled to fit Galil mags?

[h8mtv 0]

I know this would be pretty expensive, but how could you this? I feel the conversion would be worth it.

[TheGunHustler 3]

I know this would be pretty expensive, but how could you this? I feel the conversion would be worth it.

galil mags will snap right in with no mods all you need is a feed ramp

[h8mtv 0]

I know this would be pretty expensive, but how could you this? I feel the conversion would be worth it.

galil mags will snap right in with no mods all you need is a feed ramp

 

 

I thought they had to have the sides sanded down.

[TheGunHustler 3]

I know this would be pretty expensive, but how could you this? I feel the conversion would be worth it.

galil mags will snap right in with no mods all you need is a feed ramp

 

 

I thought they had to have the sides sanded down.

 

 

the metal one will snap right in

im sorry i forgot about the plastic ones

[gunboy69 50]

Promag makes an AK-47 mag in .223. Will that work?

[shooter2 5]

I thought they had to have the sides sanded down.

 

The required sanding is minor (at least for my rifle); just flatten or remove the first couple vertical ribs. A minute's work with a Dremel sanding drum.

 

My Saiga was converted by Arsenal USA (now Armory USA/Global Trades), and can accept modified Galil polymer mags, as well as unmodified Bulgarian waffles, AK-74 polymer mags and EG Weiger steel mags. Versatility is a good thing.