vjor 2 Posted November 10, 2006 Report Share Posted November 10, 2006 Hey I may be running a batch of press plates to press off FSB and GB to be use with 12 ton press if enough people interested I will post prices plus shipping by next Friday, 7 days from this Friday. Quote Link to post Share on other sites
BlenderWizard 12 Posted November 10, 2006 Report Share Posted November 10, 2006 I would be interested depending on the price. Quote Link to post Share on other sites
Jeric 0 Posted November 10, 2006 Report Share Posted November 10, 2006 +1. Let us know. Quote Link to post Share on other sites
Tiny 2 Posted November 10, 2006 Report Share Posted November 10, 2006 What will they be made of and will they also be made so that you can use them to press out the barrel pin? Will they also work with my 20 ton press? Quote Link to post Share on other sites
dinzag 31 Posted November 10, 2006 Report Share Posted November 10, 2006 Sweet man, thanks for offering this! Email sent... Quote Link to post Share on other sites
vjor 2 Posted November 11, 2006 Author Report Share Posted November 11, 2006 What will they be made of and will they also be made so that you can use them to press out the barrel pin?Will they also work with my 20 ton press? They will be made of cold roll steel, with 3 holes, center hole to press FSB on .223 and 7.62x39 and two holes in ends to press off GB on the .223 and 7.62x39, and yes they will work with any press 6 ton to 30 ton that many people have on there set up, no they are not design to take the barrel pin that hold the barrel to front trunnion. They look like this Quote Link to post Share on other sites
vjor 2 Posted November 12, 2006 Author Report Share Posted November 12, 2006 (edited) OK this is the deal, plates 3 holes, center hole to press off FSB of 7.62x39 or .223, side holes to press off GB .223 and 7.62x39. By the way it will work on Chicon and other ak47 barrels too. Plates made of cold roll steel, they are sand blasted and paint black to avoid rust, to be use with 6 to 50 ton press. Price 48.00 buck included shipping to lower 48 states, payment to be money order, this are not cheapo toys, 2 to 3 weeks for deliver from the time of money order arrival. Please PM or e-mail me at vjor40@bellsouth.net Edited November 12, 2006 by vjor Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 13, 2006 Report Share Posted November 13, 2006 I'm in there like a hairinabisquit Quote Link to post Share on other sites
vjor 2 Posted November 13, 2006 Author Report Share Posted November 13, 2006 I'm in there like a hairinabisquit ? Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 13, 2006 Report Share Posted November 13, 2006 I'm in there like a hairinabisquit ? LOL, that translates to, I'm very interested. PM inbound... Quote Link to post Share on other sites
chris410 0 Posted November 13, 2006 Report Share Posted November 13, 2006 I'll take one, PM sent Quote Link to post Share on other sites
dinzag 31 Posted November 13, 2006 Report Share Posted November 13, 2006 What will they be made of and will they also be made so that you can use them to press out the barrel pin?Will they also work with my 20 ton press? Tiny, use a cheap air hammer with a ground down bit to take the big barrel pin out. To remove the sight block and gas block pins, I have a pile of old broken drill bits I use as drifts. Quote Link to post Share on other sites
vjor 2 Posted November 14, 2006 Author Report Share Posted November 14, 2006 Damn only 3 people talk the talk and walk the walk, whats with the rest. Quote Link to post Share on other sites
Tiny 2 Posted November 14, 2006 Report Share Posted November 14, 2006 What will they be made of and will they also be made so that you can use them to press out the barrel pin? Will they also work with my 20 ton press? Tiny, use a cheap air hammer with a ground down bit to take the big barrel pin out. To remove the sight block and gas block pins, I have a pile of old broken drill bits I use as drifts. I all ready have a press kit that is similar to vjor press kit that works great for removing the the barrel pins (but) it's made out of aluminum and I would like to have a press kit that is made from cold roll steel for longevity. Heres a pic of the press kit I have. vjor Posted Yesterday, 09:46 PM Damn only 3 people talk the talk and walk the walk, whats with the rest. If I can manage to come up with the funds I'd be in for one of your press kits. I just lost my Wife of twelve and a half years on August 13 and money has been really tight lately. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 14, 2006 Report Share Posted November 14, 2006 Aaww man DAMN! Sorry to hear that bro! WTF is it something in the air this year? Quote Link to post Share on other sites
Tiny 2 Posted November 14, 2006 Report Share Posted November 14, 2006 Aaww man DAMN! Sorry to hear that bro! WTF is it something in the air this year? Tell me about it. It's been a real F**ked up year! My half Brothers Dad passed three weeks before my Wife did and my Dad just passed last Wednesday. My Wife was only 44. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 14, 2006 Report Share Posted November 14, 2006 Oh man I'm sorry Tiny. Quote Link to post Share on other sites
BobAsh 582 Posted November 15, 2006 Report Share Posted November 15, 2006 Fuck. Sorry to hear that bro. Condolences, as best I can offer. Quote Link to post Share on other sites
vjor 2 Posted November 15, 2006 Author Report Share Posted November 15, 2006 Tiny sorry to hear that bro, I know is hard, but time cures everything. Hey PM me and see what can be done about the plates. Quote Link to post Share on other sites
vjor 2 Posted November 20, 2006 Author Report Share Posted November 20, 2006 (edited) Edited November 20, 2006 by vjor Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 20, 2006 Report Share Posted November 20, 2006 Those look really good vjor! Hey do the holes have to be cut or drilled thru the plate and then the plate is cut in half? I'm wondering if it would be possible to add another couple of holes on the other side for S-12 and S-20 gas blocks? Maybe they could be ground in? It can probably be used on the S-410 like it is. Quote Link to post Share on other sites
vjor 2 Posted November 20, 2006 Author Report Share Posted November 20, 2006 Quote Link to post Share on other sites
vjor 2 Posted November 20, 2006 Author Report Share Posted November 20, 2006 (edited) OK this is the way to press stuff on the press, on the pictures you will see and Saiga 7.62 x 39, the pictures are just a simulation of the press off, the pins on the GB and FSB haven't been remove, remember these pictures are just a simulation, remove the pins that hold the GB and FSB before you press them out. Like you will see here the FSB is been remove by pressing on the barrel with a 10 mm deep socket, I found that is the best to do the job, no marks on the crown of the barrel or FSB, you will see the plates been hold by C clamps to press and together, that is the best way I have found to hold the stuff. Usually the FSB is the hardest to press out; you will hear a loud pop as the FSB comes loose and there you go, no fubar to barrel or FSB. Now on this picture you will see the GB been press out, I have found out that it comes easy as easy can be, on the pic you see the FSB on the barrel but in real press out, the FSB will be gone and you only will see the plain barrel, to this day I have press the GB just pressing on the barrel itself making sure no bending of the barrel as it gets press down, you can use pennies or a brass stub to press on the barrel down, to this day never have a barrel bend or any marks on crown on barrel, like you see I haven't use any C clamps to hold the press plates to press, well I got good doing it plus been that the GB comes really easy, not like the FSB of the barrel, just use common cense and be careful pressing the stuff off, if you feel the need to secure the plates to press, go ahead, better safe than sorry and secure the plates to press. Edited March 11, 2007 by vjor Quote Link to post Share on other sites
TheGunHustler 3 Posted November 21, 2006 Report Share Posted November 21, 2006 I am very interested in one for the s12 gas block. what all can you do to make one an what time frame? Quote Link to post Share on other sites
vjor 2 Posted November 21, 2006 Author Report Share Posted November 21, 2006 (edited) I am very interested in one for the s12 gas block. what all can you do to make one an what time frame? Hey bro give me a week and I can answer that, have to tool for it and see how much will cost to make them, if they will be made probably on same cold roll steel than the plates for the 7.62 and .223 but remember bigger holes for the 12G barrel to press the GB on it or multi-press for 12G, 20G and 410G or at list 12G and 20G Carlo ak vjor. Edited November 21, 2006 by vjor Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 21, 2006 Report Share Posted November 21, 2006 That multi plate sounds good vjor. Quote Link to post Share on other sites
vjor 2 Posted November 21, 2006 Author Report Share Posted November 21, 2006 That multi plate sounds good vjor. Well see what happens, plus see how many people order the more the better price it can be given. Quote Link to post Share on other sites
Tiny 2 Posted November 29, 2006 Report Share Posted November 29, 2006 I got the press plates last night. They look Great. Thank's Vjor. Quote Link to post Share on other sites
vjor 2 Posted November 30, 2006 Author Report Share Posted November 30, 2006 (edited) Edited November 30, 2006 by vjor Quote Link to post Share on other sites
TheGunHustler 3 Posted November 30, 2006 Report Share Posted November 30, 2006 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.