Jump to content
Sign in to follow this  
Pointer

Picture Post,lets see your 7.62x39

Recommended Posts

Here is mine Saiga 7.62, own two of them and will post both pics after upgrade completion of second rifle. Izhmash stock, tapco handguard, bushnell scope, utg legs, magpul mags ...

I am scared of changing more in my state (NJ), it is enough for now. Second Saiga will have better illuminated Bushnell scope, muzzle brake in addition to all this on picture. I love to shot both :)

 

 

p828234243-5.jpg

Edited by mbjku

Share this post


Link to post
Share on other sites

 

Finally took a decent picture of this thing, added a cheapo tac light, all done now.

IMG_0361_zps90a8dd60.jpg

 

What color stain did you use on your furniture?  Looks awesome.

 

Sweet!

Share this post


Link to post
Share on other sites

I actually really like the Saiganov stocks.  I also have the Tapco Intrafuse handguard on mine. I am putting a K-Var nato length stock on my Saiga (unconverted) but have the Saiganov stock for trips out of Kalifornistan to Free America. I am putting an aluminum trough in my Tapco handguards to act as a heat shield, and adding a standard vented gas tube with polymer top handguard to increase protection.

Here is mine Saiga 7.62, own two of them and will post both pics after upgrade completion of second rifle. Izhmash stock, tapco handguard, bushnell scope, utg legs, magpul mags ...
I am scared of changing more in my state (NJ), it is enough for now. Second Saiga will have better illuminated Bushnell scope, muzzle brake in addition to all this on picture. I love to shot both smile.png


p828234243-5.jpg

Edited by imarangemaster

Share this post


Link to post
Share on other sites

Here is mine Saiga's 7.62, own two of them. Izhmash stock, tapco handguard, bushnell scopes, utg legs, magpul mags, one is with Guntec muzzle to see difference ...

 

I am scared of changing more in my state (NJ), it is enough for now.

 

 

Latest Shots:

 

p891073925-5.jpg

 

p1006011210-5.jpg

 

With my collection of Izhmash made AK bayonets 

 

p979534909-5.jpg

Edited by mbjku

Share this post


Link to post
Share on other sites

I love the wooden stocked Veprs. I finally had my 7.62x39 converted to look just like my .308 Vepr. I know, why didn't I just buy a Vepr x39? Because I have had the Saiga for years and really like it. 

post-34443-0-78898600-1411180408_thumb.jpg

post-34443-0-78115600-1411180431.jpg

Share this post


Link to post
Share on other sites

Here are some of the Saiga builds I have done since 2007, starting with most recent first, going backwards in time:  SOme are ones I did for me, and some were for others. Download warning lots of pics!  Fist two are the same weapon. Top is my Kalifornication version, and the second is my free America version.

 

Featureless1_zps27d7a1d7.jpg

 

Saiga2_zpsa825ffb5.jpg

 

Saiga5-1.jpg

 

PlumSaiga223.jpg

 

Saiga1-3.jpg

 

RetroSaiga.jpg

 

MySaigaBaby.jpg

 

Here are some of the Saiga builds I have done since 2007, starting with most recent first, going backwards in time:  Most are ones I did for me, and two were for others. Download warning lots of pics! 

Featureless1_zps27d7a1d7.jpg
Saiga2_zpsa825ffb5.jpg
Saiga5-1.jpg
PlumSaiga223.jpg
Saiga1-3.jpg
RetroSaiga.jpg
MySaigaBaby.jpg
Saiga1.jpg

MySaiga223.jpg

Edited by imarangemaster
  • Like 2

Share this post


Link to post
Share on other sites
Here are some of the Saiga builds I have done since 2007, starting with most recent first, going backwards in time:  Most are ones I did for me, and two were for others. Download warning lots of pics! 

 

First is my current saiga, my "featureless" Kalifornication version, and the second is the same 7.62 as my free America version.

Featureless1_zps27d7a1d7.jpg

 

Saiga2_zpsa825ffb5.jpg

 

 

Plum Crazy 7.62x39.  My favorite.

Saiga5-1.jpg

 

 

These two are the same.  Later version first.

PlumSaiga223.jpg

 

Saiga1-3.jpg

 

 

 7.62x39 Saiga

RetroSaiga.jpg

 

 

My second Saiga, a 7.62x39.  I sold it to get a dimpled one (above)

MySaigaBaby.jpg

 

 

My first Saiga, a 223. Later version first, then first effort. (2007)

Saiga1.jpg

 

MySaiga223.jpg

Edited by imarangemaster

Share this post


Link to post
Share on other sites

Ak 100 folder install. Was super concerned about this. But bits really not that hard. Just very time consuming and meticulous. It's about 2-3 times the work of a standard conversion. But doable

post-48862-0-91663800-1412800435_thumb.jpg

post-48862-0-85464000-1412800489_thumb.jpg

post-48862-0-76260900-1412800518_thumb.jpg

post-48862-0-70848000-1412800553_thumb.jpg

  • Like 5

Share this post


Link to post
Share on other sites

First post from germany here!

 

Wanted to show you guys my saiga mk / 7.62x39mm

 

And want to ask a question!

 

After i filed down the magcatch to fit milsurp and magpul mags in, the gun is running fine just without a feeding ramp.

BUT every round i chamber does have a scratch at the bullet and the casing.

And if i chamber a round often enough (7 to 8 times in a row /tried it with dummy rounds yesterday) the head of the bullet gets dull and the neck of the casing will get ripped apart.

Chimps helped me out with a bulletguide from caroliner shooters but when i install it right in the middle / without overlappingwith the right "notch" of the barrel, the bolt will not close / hangs up.

 

But enough talk, here are some pics!

 

20243012du.jpg

20243013ul.jpg

 

Installed the following:

 

US Palm Grip

Tapco G2 Triggergroup

Ultamak rail

Aimpoint H1 (changed from eotech to aimpoint for reasons)

SRVV 7.62 brake

Retainerplate from krebs custom

Krebs custom Safety MK IV S

Solar Tactical MFER (which works pretty damn well!)

Edited by Lumpensack

Share this post


Link to post
Share on other sites

The siblings together. Ivan the Terrible (.308) and Ivan the Great (x39)

Love that look too... where did you get that setup, and what does the x39 weigh unloaded?

 

Anyways, here's mine, CSS conversion, Magpul grip, Phoenix Warsaw stock with compartment, and some camo tape for comfy cheek in the cold. The front of the sling is held by a stainless braid keychain thing sheathed in paracord casing...going to find a better mount eventually.

saiga_converted.jpg

 

I like the factory foregrip...but I need to get a flashlight up there and a true left-hand sling mount... any suggestions are welcome, including modding the factory. I dont want it to look to tactical..it's a dedicated D/H/V gun.

Share this post


Link to post
Share on other sites

 

The siblings together. Ivan the Terrible (.308) and Ivan the Great (x39)

Love that look too... where did you get that setup, and what does the x39 weigh unloaded?

 

Anyways, here's mine, CSS conversion, Magpul grip, Phoenix Warsaw stock with compartment, and some camo tape for comfy cheek in the cold. The front of the sling is held by a stainless braid keychain thing sheathed in paracord casing...going to find a better mount eventually.

saiga_converted.jpg

 

I like the factory foregrip...but I need to get a flashlight up there and a true left-hand sling mount... any suggestions are welcome, including modding the factory. I dont want it to look to tactical..it's a dedicated D/H/V gun.

 

Not sure of the weight, but not a whole lot of weight. Bought the stock with butt stock and vented handguard from Krebs along with a 1000m Vepr rear sight. What can I say, I am a ballistic optimist.

Share this post


Link to post
Share on other sites

Before

6FMyEaW.jpg

 

After

T58k2v2.jpg

 

Just picked this little beauty up a week ago, Saiga 7.62 looks brand new with no wear inside. Used a CSS kit to convert the trigger with Magpul PG, Phoenix butt stock, and converted it to take AK mags.

 

Not really sure what else I want to do, maybe vent the factory hand guard with a dremel, might go with synthetic AK handguard. Open to ideas.

Share this post


Link to post
Share on other sites

Mall ninja or practical?? Hiviz frontsight mojo rear sight Midwest extended handguard magpul rvg caa extended mag release houge grip vltor stock adapter moe stock surefire flashlight

post-47119-0-98418900-1424887222_thumb.jpg

post-47119-0-81047400-1424887293_thumb.jpg

Share this post


Link to post
Share on other sites

This went from a total stock IZ132 to a full converted AK103 (Clone). Some detail work left to be done on it but shaping up very nicely. These photos were taken several days ago, the receiver is at my TIG welder getting holes filled then it'll be refinished. Trigger will be here on Monday. This is my first hands on full conversion on a Saiga. Sure is easy with the right tools, Thanks AK-Builder! wink.png

 

20150727_170254_zpsh4baiqhm.jpg

 

PART_1438048499621_20150727_170227_zpshf

Edited by Towerdog

Share this post


Link to post
Share on other sites

My unconverted Saiga with a skeleton stock, KVAR handguard, dinzag trigger job, dinzag vented gas tube, bushnell trs 25 red dot and guntec side mount.  I live in California so I had to also put a bullet button on my rifle.  I've been using US made magazines to be compliant but will be doing a gas piston change in the near future to be able to use the original magazines.  

post-49817-0-20552100-1440742134_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

Tromix - Lead Delivery Systems
Dinzag Arms
CHAOS, Inc
Mississippi Auto Arms, Inc
Cobra's Custom
Carolina Shooters Supply
R & R Targets
LONE STAR ARMS
SGM Tactical
Mach 1 Arsenal
K-VAR
C&S Metall-Werkes
American Specialty Ammo
Csspecs Magazines
Phoenix Technology
Evlutionz LLC


  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...