Spacehog 2,218 Posted January 30, 2015 Report Share Posted January 30, 2015 In its final form: 13 Quote Link to post Share on other sites
wgbrown 8 Posted February 4, 2015 Report Share Posted February 4, 2015 Just finished it today. Saiga 12 3 Quote Link to post Share on other sites
heisman01 4 Posted February 12, 2015 Report Share Posted February 12, 2015 my new saiga next to my vepr 7.62x39 Quote Link to post Share on other sites
bruno 3 Posted February 18, 2015 Report Share Posted February 18, 2015 Custom Bravo 18 SBS. FITS THE 5.11 triab bag nicely. 3 Quote Link to post Share on other sites
Joe**Dirt 21 Posted February 18, 2015 Report Share Posted February 18, 2015 My 12" with Ace folder and Mississippi Arms thread protector installed. 2 Quote Link to post Share on other sites
heisman01 4 Posted February 20, 2015 Report Share Posted February 20, 2015 project time: ccs realibilty kit jte trigger spring moe stock vltor stock adapter ar grip adapter in the mail: quad rail magpul ar grip on the hunt for: fde 10-12 round mags RDS 1 point sling maybe AFG Quote Link to post Share on other sites
sailfast 3 Posted February 27, 2015 Report Share Posted February 27, 2015 got it wrapped 1 Quote Link to post Share on other sites
DONNNELLY 3 Posted February 27, 2015 Report Share Posted February 27, 2015 (edited) FDE cerakote added LRBHO and mods to the mag release and safety, Hydro dipped in Shadow Bark Edited February 27, 2015 by streetrod Quote Link to post Share on other sites
YOT 3,743 Posted February 28, 2015 Report Share Posted February 28, 2015 streetrod... You coated the innards, too?? Quote Link to post Share on other sites
DONNNELLY 3 Posted February 28, 2015 Report Share Posted February 28, 2015 streetrod... You coated the innards, too?? cerakote only, not the bolt and the carrier group areas that have metal contact weren't touched Quote Link to post Share on other sites
DONNNELLY 3 Posted March 20, 2015 Report Share Posted March 20, 2015 streetrod... You coated the innards, too?? Field report, it ran flawless, maybe I got lucky?? but like I said flawless Quote Link to post Share on other sites
MfWiC2 30 Posted March 20, 2015 Report Share Posted March 20, 2015 8" SBS 3 Quote Link to post Share on other sites
JDeko 792 Posted March 20, 2015 Report Share Posted March 20, 2015 I like that stock a lot Quote Link to post Share on other sites
Ubiquitous1 2 Posted March 21, 2015 Report Share Posted March 21, 2015 This is quite unconventional. It's a CBPRS Bullpup that I just finished. 2 Quote Link to post Share on other sites
JDeko 792 Posted March 21, 2015 Report Share Posted March 21, 2015 That looks so cool! Not dorky at all like a lot of those weird, cheap looking bullpup set-ups that are usually made. 1 Quote Link to post Share on other sites
Ubiquitous1 2 Posted March 22, 2015 Report Share Posted March 22, 2015 JD Thanks. I was wanting something short-er and this was what I came up with. The trigger linkage is just that, there is a little play in that assembly, but the trigger pull is no heavier in my opinion. The whole assembly has some beef to it. I don't have scales to weigh it out, but it's a 12 gauge HD gun for 00 buck, a little heft won't hurt the operation. I installed a flashlight on the side rail last night. I am considering some form of sight, like a red dot or ... Quote Link to post Share on other sites
JDeko 792 Posted March 22, 2015 Report Share Posted March 22, 2015 Its crazy how long the barrel looks once you see it making up the whole "body" of that gun with the receiver being the "stock". Quote Link to post Share on other sites
Mullet Man 2,114 Posted March 22, 2015 Report Share Posted March 22, 2015 Can you stop whoring up this thread with non picture replies. 4 Quote Link to post Share on other sites
mcdnd03 10 Posted April 19, 2015 Report Share Posted April 19, 2015 Here's my short shotty, I did all of the work including the duracoat. Thanks goes out to all of the forum members for several hours of education. 4 Quote Link to post Share on other sites
glynka 1 Posted April 27, 2015 Report Share Posted April 27, 2015 my AK-47 & my Saiga-12 With Slide Fire Stock !!!!!! 1 Quote Link to post Share on other sites
JDeko 792 Posted April 27, 2015 Report Share Posted April 27, 2015 I love the stock on the Saiga Quote Link to post Share on other sites
ElHuron 14 Posted May 3, 2015 Report Share Posted May 3, 2015 Had some issues with porosity in my tig welds due to a regulator leak but after a quick blast it's starting to look like something. Flattened trigger guard rivets with a ground down bolt and akbuilder rivet jig base Original style anti-slap rivet Original trigger cut, reshaped, and welded 4 Quote Link to post Share on other sites
sobrenegade 795 Posted May 3, 2015 Report Share Posted May 3, 2015 Did you make the trigger guard? It looks oversize, I like your work, definitely clean and still good job on the welds. Quote Link to post Share on other sites
ElHuron 14 Posted May 3, 2015 Report Share Posted May 3, 2015 Did you make the trigger guard? It looks oversize, I like your work, definitely clean and still good job on the welds. It's the akbuilder trigger guard, selector stop, and reinforcement plate. Thanks for the compliment. Quote Link to post Share on other sites
Jack Burton 2 Posted May 17, 2015 Report Share Posted May 17, 2015 Folding Raptor Stock, forend, muzzle break, trigger, HK sights all from from Carolina Shooting Supply Brownells spray paint and fishnet stockings 2 Quote Link to post Share on other sites
Kingchedr 12 Posted June 3, 2015 Report Share Posted June 3, 2015 Nothing special but they're mine 2 rock n lock arsenal side folder and the other one is being converted as I speak the others is a saiga 12 030 from legion converted by them I put the houge grip and I canned the tapco fixed stock although I think it might go into my other conversion for now and last but not least my vepr 12 with ergo grip and moe rail on the handguard and 2 sgm breachers and 1 lynx kamerton 2 2 Quote Link to post Share on other sites
Mullet Man 2,114 Posted June 11, 2015 Report Share Posted June 11, 2015 17 week wait for the butt stock. it was an 8 week wait from Iron Wood Designs and a 9 week wait after that from Combloc Customs. Next project is welding up the receiver holes and eventually a refinish of the entire gun. So close to being done.... 5 Quote Link to post Share on other sites
JDeko 792 Posted June 11, 2015 Report Share Posted June 11, 2015 I hear ya, I've been waiting 12 weeks for my set from Ironwood. Quote Link to post Share on other sites
Spacehog 2,218 Posted June 12, 2015 Report Share Posted June 12, 2015 Looks awesome MM! 1 Quote Link to post Share on other sites
gibsonsg05 7 Posted July 14, 2015 Report Share Posted July 14, 2015 Just joined the Saiga family today when I picked up my new IZ109T from the FFL today. Can't wait to put some rounds down range. 4 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.