technosavant 0 Posted July 31, 2009 Report Share Posted July 31, 2009 I just finished "Abomination" a little bit ago. Color is Duracoat's combat green. That's a 3rd generation (button cell) Kobra on it. I can't wait to see what people at the skeet/trap club think of this... Quote Link to post Share on other sites
KROSS FA 14 Posted July 31, 2009 Report Share Posted July 31, 2009 Tromix S17 8" SBS with: KROSS Hellion Tri-Rail Hand guard Tromix upper rear HK picatinny rail Tromix charging handle knob Tromix SRTrigger Limbsaver Zach KROSS FA 2 Quote Link to post Share on other sites
excesspeople 0 Posted August 2, 2009 Report Share Posted August 2, 2009 [attac hment=34511:DSCN0946.JPG] 19" Saiga-12: Aug Green and Matte Black Duracoat,Tromix Shark Brake, Tromix DIY trigger guard, Tromix FCG, Screw Build Set, Tapco Saw AK grip, Tapco Galil Handguard, Tapco Folding Stock, JTE Performance Power Mainspring, Gunfixer gas plug 19" Saiga-12: Matte Black Duracoat, Tromix Shark Brake, Tromix DIY trigger guard, Tromix FCG, Saiga Internal Stock Adapter, Tapco Saw AK grip, Intrafuse Handguard, CA Vertical Grip, CA Flashlight Mount, Surefire G2, ACE 8.5" Stock w/ folder, JTE Performance Power Mainspring, KA Gas tappet, Gunfixer gas plug Quote Link to post Share on other sites
Glockmonger 18 Posted August 2, 2009 Report Share Posted August 2, 2009 Not all mine. Quote Link to post Share on other sites
TheDarkHorse 216 Posted August 4, 2009 Report Share Posted August 4, 2009 I was happy with the "Sporting" configuration, but curiosity got the best of me. Just got done with the conversion. It's about as basic as you can get, which is what I like. Notables: Tapco stock (filled for strength and balance). Tapco single-hook G2 FCG modified by me. AK-Builder trigger guard with PG mount. U.S. grooved pistol grip (M70 style) Chaos tappet/puck Fully functioning BHO Chinese sling (w/leather tab) Promag 10rd mags Taiwanese 5rd mags Quote Link to post Share on other sites
WhiteWi 0 Posted August 6, 2009 Report Share Posted August 6, 2009 upgraded my Saiga with Russian buttstock. Quote Link to post Share on other sites
Rickj427 15 Posted August 11, 2009 Report Share Posted August 11, 2009 Here's my baby. I just finished her today. Thanks to Cobra's Customs I got everything I want and more! I can't wait until the Duracoat fully cures so I can take it out and shoot! Quote Link to post Share on other sites
cplumdrum 0 Posted August 11, 2009 Report Share Posted August 11, 2009 Just finished my boom-stick. Tapco M4 collapsable stock Chaos Quad rail Chaos fore end grip Flash suppressor AK style front sight kerbs ghost ring MD arms 20 round drum chopped the barrel to 18 inches. Rock on... ~Chiss Quote Link to post Share on other sites
NM0 586 Posted August 12, 2009 Report Share Posted August 12, 2009 Never got around to taking a pic till today. It is a basic conversion, you all know what the parts are. Quote Link to post Share on other sites
KROSS FA 14 Posted August 14, 2009 Report Share Posted August 14, 2009 19" Saiga with our KROSS FLTR hand guard. Shown with Cobra's upper gas tube cover. Zach KROSS FA Quote Link to post Share on other sites
DrWho 10 Posted August 15, 2009 Report Share Posted August 15, 2009 Texas Trigger Double hook FCG DPH Stock and Grip MSA ISA Tromic DIY trigger guard Folding mech (with slight wiggle) Chaos Gas Piston Dinzag hole plugs ATI strikeforce grip tapco forgrip gasfirex gas plug Quote Link to post Share on other sites
Paulyski 2,227 Posted August 15, 2009 Report Share Posted August 15, 2009 Polished the innards rid of that spray paint crap (coating). Smoothed out feed area. Ultra dependable w/5rd mag since polishing Pro-mag-10 (it never worked so I keep it on for a dummy & lock up the 5rd & ammo so I don't have to face my S-12 w/ my Glock) Paulyski (me) built stock (almost finished) After saving & buying a couple MD-20's I AM going to convert. I like cobras guard too. & no it is not chambered with the safety off. Quote Link to post Share on other sites
JohnNLV 0 Posted August 16, 2009 Report Share Posted August 16, 2009 OK, my war machine is now complete. Special thanx to Redstick for the original conversion Thanx to Cameron at Chaos And everyone here on the forum that helped me with ideas and instruction. Now I'm ready for when they come... Quote Link to post Share on other sites
crux 2 Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) Finally finished self conversion. Cheap and functional. Phantom Brake Tapco, Tromix complete trigger group ATI Folding 6 position stock CAA grip Tapco Rail/handguard Edited August 23, 2009 by crux Quote Link to post Share on other sites
Glockmonger 18 Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) Here is one I am working on, both pics have two shells in flight. Edited August 16, 2009 by Glockmonger Quote Link to post Share on other sites
jestertoo 1 Posted August 16, 2009 Report Share Posted August 16, 2009 (edited) 12.5", Phantom brake, tromix guard, tapco trigger, ace folder. Stock front handguard w/ milled slots and car15 rail mounted. Shoots great with stock gas system and remington express loads. Edited August 16, 2009 by JesterToo 1 Quote Link to post Share on other sites
MrM4 3 Posted August 19, 2009 Report Share Posted August 19, 2009 Mine, 8" done by Tromix. Currently waiting in transfer. Quote Link to post Share on other sites
Tx1021 0 Posted August 20, 2009 Report Share Posted August 20, 2009 Might as well post mine here All of the furniture is Tapco Flat Dark Earth Quote Link to post Share on other sites
SoltPeppor 0 Posted August 22, 2009 Report Share Posted August 22, 2009 TLR-2 laser/light module. Didn't see anyone with this but this is what it looks like. Can activate it with the thumb this way. The sheets are floral; hope ya like 'em. Jeff from Arizona Armory did my conversion. He has some of his other work up I saw. Quote Link to post Share on other sites
Alwaysshooting 1 Posted August 23, 2009 Report Share Posted August 23, 2009 (edited) Finally looking like it is getting somewhere and I thought I would post some pics.. Sorry about the quality of some. Tromix DIY DPH Stock w/ pad Chaos Tri-rail MD Arms Gunfixer Plug ISA & folding mechanism from MSA Custom Barrel Shroud from Alumalite KA gas puck Edited August 23, 2009 by Alwaysshooting 1 Quote Link to post Share on other sites
dngrspot 3 Posted August 24, 2009 Report Share Posted August 24, 2009 Mostly a basic conversion here, Tapco FCG, US Made puck and forearm. But, I pulled the thumbhole stock off my MAK-90, and put that on the shotgun. I plan to change the color of the stock to black eventually. Quote Link to post Share on other sites
042399tank 0 Posted August 24, 2009 Report Share Posted August 24, 2009 Quote Link to post Share on other sites
Pointer 21 Posted August 27, 2009 Author Report Share Posted August 27, 2009 Newest addition,wanted to keep this one non converted. Chaos Quad Rail Magpul Rail Covers Burris Fastfire 2 Red Dot Surefire 9P with 200 lum LED lens Vltor light mount King Armory Puck US made Russian Flash Hider 10 Slot SMG Tactical 1" Recoil Pad/Stock shortened 1/2 " Not shown:CQD Sling Mount and 2" Black Israeli Military Sling Quote Link to post Share on other sites
caliberclark 9 Posted August 30, 2009 Report Share Posted August 30, 2009 Sorry for the poor lighting. Pretty much basic conversion. Quote Link to post Share on other sites
bigwookiee 1 Posted August 31, 2009 Report Share Posted August 31, 2009 My baby. As you can tell I have heavily modify my stock gun back into the ak-47 look with pistol grips and six position collapsible buttstock for AKs. I have a fire control group made in the USA so that it complies with federal firearms rules. Plus the butstock, pistol grip, picatinny rails, foreword pistol grip are all made in the USA. I add a forward optic mount for saiga 12 & 20 shotguns picatinny (1913) style rail. Which has an EOTech holo site which I prefer to red dot as it gives a wide field of view. I also add a bolt on picatinny (1913) style rail to the stock hand guard. I don't like this set up as much as I would a replacement 3 rail forend like this one at ultimak.. I have one of their AK Modular "Ultimak" Rail Forend System which has three rails at 3, 6, and 9 O'clock for my Saiga .223, which I converted to ak-47 look as well. (I have a KROSS Saiga 12 FLTR on the way.) I add a Streamlight TL-3 Thunder Ranch edition tac light. I am glad I got the Thunder Ranch because it came with a mount that you can add to a gun stock by drilling a few holes and I was able to add the light to the 3 O'clock position on my stock and not have to put it onto my lower picatinny rail. With the light on the bottom as I had it originally mounted I could not turn it onto the steady on position and my hand was very crowded when it was on the forward pistol grip. Buy adding the included mount to the stock cleared all that up. On the end of the muzzel is a Shark Brake Door Breacher from Tromix lead Delivery systems. http://www.tromix.com Quote Link to post Share on other sites
juvycop 1 Posted September 4, 2009 Report Share Posted September 4, 2009 Here's mine. Just finshed the conversion Tuesday. Now for sights, muzzle brake, rails.......................... Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted September 5, 2009 Report Share Posted September 5, 2009 "Gun Porn" S12 Custom by Waffenschmied Jeweled action. Honed, mirror finished bolt, bolt carrier, carrier rails, and feed ramp. Five vent, polished and ported enhanced gas system with mirror finished, builder modified gas plug. Builder custom sculpted, vented fore end with ironwood finish, 2" picatinny rail, and vertical foregrip. Builder modified Tapco G2 FCG with milled mirror finished glide and striking surface on hammer. Tapco Galil style folding stock tapped and mounted with extra heavy duty torque bolts Tapco M243 style Saw grip with builder designed custom heavy duty receiver mount. MD Arms 20 round drum charged with low recoil Rio Royal high brass 00' buck Finished in satin high heat black ceramic enamel. Flawless cycling with all types of 12 gauge ammo. Does it shoot as good as it looks? You bet it does! Am I proud of it? You bet I am! Kudos to all for all of the great S12's posted on this thread! WS Quote Link to post Share on other sites
zenmetsu 17 Posted September 5, 2009 Report Share Posted September 5, 2009 In progress. So far I have a RedStarArms FCG and trigger guard from Cobra76two, I have wooden stock that I got from Tokarz, re-dyed to a deep red, and the bolt-on lower retainer from Dinzag. Oh, also got scope rail from Gas Giant. I also have a US made puck so that I am in compliance. Still need to get the press-on upper and AK rear sight block from Dinzag once I get the money saved up Lots of challenges so far, but it has been fun! Quote Link to post Share on other sites
zenmetsu 17 Posted September 6, 2009 Report Share Posted September 6, 2009 Finished the new buttstock and put the first back on my Romy... she still wants her PG back though They are almost twins. I just need to get the press-on upper from Dinzag. Forgive the clutter in the picture, I have one south facing window, and for good reason. The Romy has scout scope on it... works quite well. I have a crappy tri-rail mount on the cover in the back because I was testing a dual-laser+scope setup at the range... was fun. Quote Link to post Share on other sites
lifegard 2 Posted September 11, 2009 Report Share Posted September 11, 2009 My first conversion. Tromix Trigger guard Tromix FCG Cobra Heat Shield SGM Tactical LHG UTG Foldable foregrip with storage ATI Foldable stock with Cheekpiece ATI Pistol Grip But I also have the Hogue grip that is on the 7.62 mod--my second conversion Gunfixer Adjustable Gas Plug Power improvement spring for bolt JTE performance spring for trigger Mag release extender from Blackjack buffers Krebs modified safety lever Side mount-quick release from UTG 4 Recticle, 7 brightness level red dot from UAG Tromix Charger handle extension--knurled type DPH Arms Flash Hider Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.