Milsurps 4 Me 14 Posted October 13, 2010 Report Share Posted October 13, 2010 My 12 on the right: It screams for more such as a PK-A, muzzle brake, and some new sights but funds are low so I'm still building a part at a time. 1 Quote Link to post Share on other sites
INDYk 9 Posted October 13, 2010 Report Share Posted October 13, 2010 Here is mine. Im in the process of replacing the handguard. Russian plum Quote Link to post Share on other sites
mike.haug 0 Posted October 15, 2010 Report Share Posted October 15, 2010 Day 1 with My new Saiga 12. It is facotry stock, hasn't been fired (yet). I got it today from Greg at Carolinashooterssupply.com. Greg is great to deal with and patiently answered my questions. I shot a Tromix Saiga 12 a few weeks ago, ans had to have one of my own. Mine is no Tromix, but I will be working on it!! The other pic is my 2 AGP "Build it yourself" 10rd. mags. For $5 more, they would've sent them to me assembled, but whats the fun in that?? Quote Link to post Share on other sites
farmdog 12 Posted October 17, 2010 Report Share Posted October 17, 2010 Nothing special but it's mine. Quote Link to post Share on other sites
TwentyNizzo 66 Posted October 19, 2010 Report Share Posted October 19, 2010 Here's mine, nothing special. Ignore the M4A3 Quote Link to post Share on other sites
eric2281 0 Posted October 19, 2010 Report Share Posted October 19, 2010 (edited) Here's mine~ Just got the Chaos handguard in the mail yesterday & the MD drum a week or 2 ago. Edited October 19, 2010 by eric2281 Quote Link to post Share on other sites
midnaite 43 Posted October 23, 2010 Report Share Posted October 23, 2010 the final version : -10 inchses barrel, made by myself, still cycling as before -pistol grip magpul MOE -chinese mini docter sight, 100 rds and still working -3 rail forehand -promag 12cps still wainting for a MD20 5 Quote Link to post Share on other sites
epbullen 21 Posted October 25, 2010 Report Share Posted October 25, 2010 An updated version of mine, the ladybugs add a nice touch, yeah? Polished/re-profiled bolt, carrier and hammer, opened up the 3 ports to .093. No FTE's after about 500 rounds through that clear surefire 10 rd, factory 5 rd and the MD-20. Cut the barrel from 19" to 18.0625" (18 1/16). Still gets all the attention at the range, 'specially when a full MD-20 goes on it. Most addictive weapon I've ever fired. Quote Link to post Share on other sites
INDYk 9 Posted October 26, 2010 Report Share Posted October 26, 2010 (edited) cant seem to edit original post,, so here is my updated Saiga 12 Pic with BP-02 optics mount and some other goodies like Authentic Russian Plum, Konus red dot. Edited October 26, 2010 by Indyk Quote Link to post Share on other sites
fanaticalbucsfan 15 Posted October 26, 2010 Report Share Posted October 26, 2010 Here is my SHTF starter kit. What do you think? Quote Link to post Share on other sites
Vodo Specialist 0 Posted October 26, 2010 Report Share Posted October 26, 2010 Quote Link to post Share on other sites
Kss_Waylander 0 Posted October 28, 2010 Report Share Posted October 28, 2010 mine Quote Link to post Share on other sites
VAGunner 0 Posted October 28, 2010 Report Share Posted October 28, 2010 Here's my Saiga-12: G2 trigger group, Krebs custom axis pin plate, SAW style grip, AR style stock, UTG quad rail, AR-Stoner broom handle, 12&10 round mags, BSA 30MM red dot(saving for the EOTech), Poly choke 2, Bolt carrier and bolt has been glass bead blasted and nickel plated, entire gun has been stripped and double gun kote on the interior of the receiver and exterior of the gun, also had 2 more gas ports drilled in the barrel to bring it up to 4 gas ports, and a recoil buffer. Pure 2nd Admendment bliss. Quote Link to post Share on other sites
saiganovich 1 Posted October 28, 2010 Report Share Posted October 28, 2010 here's my Saiga! Just picked it up today, range date is in 2 weeks...can't wait. Just have a stock 5rd mag and a 10rd mag with it. Quote Link to post Share on other sites
ErikTaylor 41 Posted October 29, 2010 Report Share Posted October 29, 2010 (edited) Para cord wrapped Ace 7.5 stock Ace folding mechanism Bolt in receiver block Tapco FCG Tapco SAW grip Tromix D-I-Y trigger guard MD-20 HK sights (weld) Left side charger Tromix oversized charging handle Kreb's safety lever mod (weld on stock lever) Extended mag release (weld on stock extension) Chaos tri rail V Plug King Armory tappet Phoenix door breacher KAC rail covers 3 point sling KAC vertical foregrip Edited October 29, 2010 by ErikTaylor 2 Quote Link to post Share on other sites
mammynun 14 Posted November 3, 2010 Report Share Posted November 3, 2010 Pretty much done. 1 Quote Link to post Share on other sites
jswledhed 57 Posted November 13, 2010 Report Share Posted November 13, 2010 (edited) Edited November 13, 2010 by jswledhed 3 Quote Link to post Share on other sites
PapaZorro 401 Posted November 14, 2010 Report Share Posted November 14, 2010 (edited) The "Vepr-12 Molot" shotgun is made on the basis of the Kalashnikov light machine-gun (RPK), produced for the shells of 12/76 gauge. "Vepr-12 Molot" (VPO-205, 430 mm barrel) is a multi-purpose semi-auto shotgun, from other versions of Vepr-12 it differs with an available detachable flame arrester installed on the barrel muzzle part and with a mechanism blocking the trigger and eliminating from the possibility of shooting, when the stock is folded up. Original Vepr-12 Molot (VPO205) made by VYATSKIEPOLYANY MACHINE BULDING PLANT (Molot) was bought due to better quality then IZHMASH production. Modifications were made: Original (Molot) stock was removed, Folding Stock Adapter (compatible with MilspecAR15 stock) made by Molot was installed. Then was installed VLTOR 5-Position Receiver Extension, Magpul CTR Carbine Stock & Magpul Enhanced Rubber Buttpad. Original (Molot) pistol grip was replaced by Hogue AK-47 / AK-74 Rubber Grip with Finger Grooves. Original (Vepr-12 Molot) Lower Handguard Rail System was replaced by Molot RPK Handguard without Picatinny M1913. Original Trigger Group was replaced by RSA Adjustable AK Trigger System for Saiga 12/20 Gauge from Power Custom. After trigger adjustments were made, Safety was Adjusted For Proper Safety Engagement by Removing metal from the Safety. Original (Molot) magazine release was replaced by RAM Saiga 12 Extended magazine release. E-Tac TwisterPuc (Standard) Gas Piston was modifided to fit Vepr-12. Bolt details, as well as, Trigger Group and Bolt Rails ware polished. Custom made Muzzle Break with Compensator installed. Original paint was removed (by 98% Alcohol & brass brush) and shotgun was painted by Duracoat (Ultra Flat Tactical Black + Ultra Flat Tactical Extreme Gray). Internals ware painted two colors: Flat Black + Ultra Flat Tactical Extreme Gray, 8-round magazine was paintede EOTch FlatDark Earth, 4-round magazine was painted UltraFlat Tactical Black. Molot muzzle Attachment (Cylinder-choke) - Flash Hinder painted Duracoat Ultra Flat Tactical Extreme Gray (lower) & Custom (two chambers) Muzzle Break-Compensator painted Duracoat Ultra Flat Tactical Black(upper). Detailed pictures are here Edited November 14, 2010 by PapaZorro 4 Quote Link to post Share on other sites
Mayor Al 41 Posted November 14, 2010 Report Share Posted November 14, 2010 (edited) Here is my CSS supplied Saiga-12, with the TAPCO Dark-Earth furniture. I wonder why they didn't call this color Desert Tan or something like that. Dark Earth it Ain't !! I added a side-quik-mount 978, and a 4 way red/green dot sight. Got some extra 10 round mags and a v-plug to put in yet, but this is mine. One photo of the gun, and two of the sight and mount. Edited November 14, 2010 by Mayor Al Quote Link to post Share on other sites
johnnyeastside 5 Posted November 15, 2010 Report Share Posted November 15, 2010 Fresh conversion, shown with XD-9 Quote Link to post Share on other sites
Heath_h49008 442 Posted November 23, 2010 Report Share Posted November 23, 2010 Trigger Guard (TIG welded)... made by me Forend... made by me Internals... tweaked by me Left side bolt handle... made by me out of an AK piston Extended mag release... made by me Grip... Tapco SAW JT AGP Magwell (First Generation) MSA stock adapter, CSS pignose adapter, UTG folding mechanism, Tapco AR stock and tube. (I have to be over 30" folded in Michigan, hence the odd adapters) Krylon and my own pattern for paint/camo That's a Promag 10... but I have AGP mags as well. Quote Link to post Share on other sites
Jdhonda810 29 Posted November 23, 2010 Report Share Posted November 23, 2010 Here Are My Izhmash brothers (my boys).... 1 Quote Link to post Share on other sites
Jdhonda810 29 Posted November 23, 2010 Report Share Posted November 23, 2010 IZHMASH BROTHERS! 1 Quote Link to post Share on other sites
ChileRelleno 7,071 Posted November 24, 2010 Report Share Posted November 24, 2010 What does this picture need? MDArms Double Stack Mags! 2 Quote Link to post Share on other sites
deric brunette 3 Posted November 26, 2010 Report Share Posted November 26, 2010 Heres my BEAST!!!!! Tapco Trigger Forward conversion with pistol grip Tapco Adj. Stock ProMag 12 Rnd Mag. UTG Qaud Rail UTG Foregrip EOTech Red Dot Sight Qwick mag release lever 1 Quote Link to post Share on other sites
wildcatkit52 3 Posted November 27, 2010 Report Share Posted November 27, 2010 Haven't really done anything with mine 12 aside from a large quantity of 10 rounders... Quote Link to post Share on other sites
raymundo 4 Posted December 1, 2010 Report Share Posted December 1, 2010 mine Quote Link to post Share on other sites
Fumes 84 Posted December 1, 2010 Report Share Posted December 1, 2010 (edited) Ultra Light Modular Side Folding Stock MD Arms molot grip CSS trigger guard and FCG CSS tri rail "Fumes" custom SKS heat shield ( I have these specially made ) Tromix charging handle MD Arms V plug Painted w/ cast iron color idea I stole borrowed from Chile (thanks man ) SVG from CSS everything lightly polished runs great Mags: 3 10 rnd AGPs 1 12 rnd surefire 1 5 rnd stock 1 20 rnd MD Arms drum Edited December 1, 2010 by Fumes 2 Quote Link to post Share on other sites
Reignick 2 Posted December 1, 2010 Report Share Posted December 1, 2010 (edited) Well as I got off to a rocky start ( less asked the better for all of us .) I thought I would try to patch things up by posting one of my conversion jobs . This little beaut being a personal build unlike a few of the conversions I have done for friends. So there ya have it feel free to give me advice or pick it apart , choice is yours, and this one is still a work in progress. Parts used, : Chaos tri-rail Tapco g-2 trigger ( Tromix cut & polish from Carolina shooter's supply ), CSS bolt on trigger guard Cobra heat shield Magpul AFG / Magpul rail covers /Magpul CTR stock ACE internal trunnion and Ar style folding stock adapter Enidine "shot stock" Chaos US gas puck Houge AK grip Kreb's safety BLACKHAWK! stock tube sling adapter and a 20 round drum from MD Arms still undecided on muzzle device and if I will upgrade the tri-rail to a quad.( with H&K style sights. ) that or the Kreb's siaga 12 bolt on sight. REALLY needing those double stack mags, Mike! "wink wink, nudge nudge" o.k , I'll shut up now.. Edited December 1, 2010 by Reignick Quote Link to post Share on other sites
Centauro97 2 Posted December 2, 2010 Report Share Posted December 2, 2010 Tried for a littler different look. Plan on adding an Ironwood beech Yugo grip when it comes in. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.