Grumpyone 2 Posted June 20, 2012 Report Share Posted June 20, 2012 Here's my Saiga-12 It's been stripped and sandblasted.The receiver, dust cover, barrel, and ladder rail protectors have been coated with Tungsten Cerakote while the bolt, trigger, trigger guard, safety lever and bolt hold open has been coated with graphite black Cerakote. Internal work includes polishing trigger and the bolt. The bolt has also been shaped to allow a full magazine to be inserted wiht the bolt closed. It's a 4 port gun and the gas ports have been drilled t ensure they are uniform. The gas block as also had the hole enlarged a little to ensure the ports are not covered. Chaos Titan Quad Rail Red Jacket Firearms Immobolizer Brake Barrel nut for brake indexing Magpul flip up front and rear sights FAB Defense T-POD Tactical Foregrip-Bipod TAC-47 Auto Plug CSS Performance PUC Phoenix Technologies Kicklite 6 positionTactical Stock TAPCO Trigger and Hammer Mission First Tactical Engage AK grip Carolina Trigger Guard Surefire Flashlight with GunTec 1 inch offset Flashlight mount MD Arms 20 round drum AGP 10 Round magazine 1 Quote Link to post Share on other sites
ConservativeHawaiian808 10 Posted June 21, 2012 Report Share Posted June 21, 2012 Here's the completed version of my Saiga with the drilled and tapped Ultimak rail, red dot, kushnapup. 4 Quote Link to post Share on other sites
breakaway 4 Posted June 23, 2012 Report Share Posted June 23, 2012 (edited) Converted CA legal Saiga 12 Tactical Shotgun IZSL-412A w/ factory magwell from RifleGear Izhmash 8 round mag Ace 8.5" skeleton stock Ace AKRBU -no mod receiver block Surefire 660l EOTech XPS2 Red Jacket muzzle brake Edited June 23, 2012 by breakaway 4 Quote Link to post Share on other sites
rockinpgh 0 Posted June 25, 2012 Report Share Posted June 25, 2012 Here's mine i just finished a couple weeks ago. css diy kit polychoke apex bulgarian plum set modified for s12/iz108 (upper hg cut & reinforced to accomodate the rail sights) dinzag front hg retainer russian sling polished bolt (light and home done) 4 port gun I am pleased w it. Got that 'third world' look. Many thanks to everyone on this forum for all the info and the great resource that it is. Gin shoots reliably w bulk on 2. Thanks Rock Quote Link to post Share on other sites
TtopFoxRod50 6 Posted June 27, 2012 Report Share Posted June 27, 2012 Here is an updated picture of mine. I just installed the Chaos extended forearm. 1 Quote Link to post Share on other sites
Pangoner 4 Posted June 29, 2012 Report Share Posted June 29, 2012 This is mine 4 Quote Link to post Share on other sites
Revorg99 2 Posted July 4, 2012 Report Share Posted July 4, 2012 (edited) TAC-47 Industries did my conversion (great work by Keith Nels) and I did the rest. Operates smooth as butter, less recoil, stays on target, and a boat load of fun! Saiga 12 Gauge with Full Conversion Chaos Titan Quad Rail System for Saiga-12 Barska Multi Rectical Electro Sight Chaos H&K Style Rear and Front Sights Alumalite Saiga 12 Barrel Shroud Tapco Stock & Fore Grip Hogue Pistol Grip TAC 47 FCG TAC 47 Auto Plug MD Arms Stainless Steel Piston Gas Service Blackjack Recoil Buffer Polished Bolt & Carrier Tromix Bolt-On Oversize Charging Handle Parkerized & Teflon Coated Blue Force 2 Point Sling Edited July 4, 2012 by Revorg99 1 Quote Link to post Share on other sites
FOURBUX 22 Posted July 4, 2012 Report Share Posted July 4, 2012 Revorg, I really like the look of your build. I have been thinking about getting that barrel shroud from CSS, but I was wondering if it works well to reduce heat for handling at the range... does it get too hot to touch after shooting? Here's my build, which is close to yours, minus the extras. I have since added a BHO, which wasn't included in the conversion I bought, and an extended magazine release. I hope JTE's new mag well will be out soon, I think it will round the gun out nicely. Quote Link to post Share on other sites
Goose 95 Posted July 10, 2012 Report Share Posted July 10, 2012 ACE Socom carbine length stock Tapco Saw pistol grip CSS trigger guard Tapco Intrafuse handguard Magpul AFG Surefire Scout Light MD Arms booster puck TAC47 AutoPlug PolyChoke II Doorbreacher Pauly did all my bolt work and polished up my Texas AK double hook trigger fcg *I had an ACE folder but I took it off recently Quote Link to post Share on other sites
KennyFSU 249 Posted July 10, 2012 Report Share Posted July 10, 2012 Mine is really dull and boring compared to your guys' guns but I want mine to resemble a traditional AK. I'd like a front sight for it next but not sure which one to get yet. I hate the ones that have the Allen screws on the bottom. 1 Quote Link to post Share on other sites
lelandeod 179 Posted July 15, 2012 Report Share Posted July 15, 2012 (edited) Here is the last Saiga I've built. Love it! Edited July 15, 2012 by lelandEOD 6 Quote Link to post Share on other sites
natec 3 Posted July 16, 2012 Report Share Posted July 16, 2012 All conversion parts from CSS. 2 Quote Link to post Share on other sites
Warthog35F 11 Posted July 18, 2012 Report Share Posted July 18, 2012 (edited) My S-12 restored by National Firearms and reliability package by National Firearms put a chaos extended quad rail,Limited production Claw flash hider breacher ,T-6 collapsable stock with CAA checkrest,Ergo grip, Magpul AFG1, costom trigger guard,with cerakote finish in black and cerakote finish on bolt carrier bolt and trigger have a high polish rails polished and also have an MD arms gas puc and i love the thing only hickup i have experiensed out of 300 rounds was a bad spring in a pro mag 10 rnd replaced spring with stainless steal spring and problem solved i have had AK varients ever since i got out of the military and loved the design wich lead to my S-12 purchase well worth it National Firearms has a facebook page id post a link but im not a facebook man let me know what you guys think im a new member thanks Edited July 18, 2012 by Warthog35F 1 Quote Link to post Share on other sites
macbros 2 Posted July 18, 2012 Report Share Posted July 18, 2012 I finally finished the conversion! First conversion, I performed all the work myself except for the glass-bolt by Pauly. 2 Quote Link to post Share on other sites
bioweaponeer 2 Posted July 21, 2012 Report Share Posted July 21, 2012 (edited) Just got done doing my conversion, I need to go back and clean it up with a little paint. Wanted it functional for the range tomorrow... Edited July 21, 2012 by bioweaponeer Quote Link to post Share on other sites
ZM 1306 2 Posted July 21, 2012 Report Share Posted July 21, 2012 Quote Link to post Share on other sites
chicagosfinest 26 Posted July 24, 2012 Report Share Posted July 24, 2012 Nothing special just my shotty Quote Link to post Share on other sites
JoeAK 337 Posted July 25, 2012 Report Share Posted July 25, 2012 Just converted it today, I'm using the stock from my rifle until I get around to making one for this one. Quote Link to post Share on other sites
boricua2480 7 Posted July 26, 2012 Report Share Posted July 26, 2012 Here is my Lone Star Arms build I just got back after 4 weeks of them having it. Please refrain from using words like "sexy" or phrases that indicate you have, or are post erection because that's just weird and doesn't make sense to me. We are grown ass men and its a gun, not a porn star. Its a damn good looking firearm, lets just put it at that. 4 Quote Link to post Share on other sites
chrisdeavers 10 Posted July 29, 2012 Report Share Posted July 29, 2012 here is mine. did all the work myself. enidine shot shock, magpul acs-l, tac 47 auto plug, ergo pistol grip with palm shelf, gas tube vent cover, css internal stock adapter w/pig nose adapter, jt engineering trigger guard for ar pistol grips. I love it. i got lucky because my gun came from the factory with 4 gas ports. i am going to shoota few hundred rounds through it tomorrow. 1 Quote Link to post Share on other sites
TheDarkHorse 216 Posted August 2, 2012 Report Share Posted August 2, 2012 Not finished with either, but here are my two... The converted '08 (top) and the sporting '11. Ergonomics are very similar between the two. Quote Link to post Share on other sites
Darko 42 Posted August 4, 2012 Report Share Posted August 4, 2012 Fresh Tromix S02 build. Ace Club Stock with Ace folder, UTG quad rail. The stock is longer than I thought it would be, so I'll be swapping that out. And I'm not sure if I like how heavy the quad rail is. I might go back to the vented Tromix and just throw a rail on the bottom for a flashlight. 2 Quote Link to post Share on other sites
FoursixzeroEOD 1 Posted August 7, 2012 Report Share Posted August 7, 2012 First conversion 1 Quote Link to post Share on other sites
sportzkardnutt 0 Posted August 15, 2012 Report Share Posted August 15, 2012 Here's my baby. It stays loaded with a 5 round. But I have fun with my 20 & 10 round mags. Quote Link to post Share on other sites
TtopFoxRod50 6 Posted August 17, 2012 Report Share Posted August 17, 2012 (edited) Updated pic. I need a shorter flash light for the foregrip. Edited August 19, 2012 by TtopFoxRod50 Quote Link to post Share on other sites
asgoodasded 0 Posted August 18, 2012 Report Share Posted August 18, 2012 here is mine Quote Link to post Share on other sites
gregomega 929 Posted August 22, 2012 Report Share Posted August 22, 2012 (edited) Just took a few pics of the new wood set I got a while ago. Also took off the Front sight and bayo lug. Getting it ready for Evlblk SBS Might invest in an ak hinge block and try and mount it to the s12 and have a krink style cover. Not sure if its going to work or not. If it does, Ill move forward and work on getting the front sight on the gas block. SaigaTechUSA/RamLake is the only one so far that Ive seen do this. It would be awesome to get this done. we'll see. Edited August 22, 2012 by AZG 2 Quote Link to post Share on other sites
mrmansonff 8 Posted August 26, 2012 Report Share Posted August 26, 2012 (edited) Took some waiting but its finally done Edited August 26, 2012 by mrmansonff 6 Quote Link to post Share on other sites
Nathanb 5 Posted August 28, 2012 Report Share Posted August 28, 2012 not as cool as some but its mine. 4 Quote Link to post Share on other sites
Mohawk Bob 26 Posted August 29, 2012 Report Share Posted August 29, 2012 I am new here and this will be my first post. I bought a base saiga 12 about 2 months ago and added these extras myself. This was the first gun that I have ever added mods to and it was easy and fun. I LOVE this gun, it has by far been the best purchase I've ever made. Please feel free to send me any comments or suggestions. here is what I have done. added a T6 extendable pistol grip stock added a alluminum quad rail and vertical fore grip added the red dot installed a reliability kit that came with a upgraded recoil spring, a better gas puc, and a 6 stage gas port. I have many more things I would like to add so I would like to hear some suggestions ( please send them to me in a direct message. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.