dagast2 0 Posted June 1, 2007 Report Share Posted June 1, 2007 I just finished my own conversion of a .223 to US parts/pistol grip etc. How similar is this process for the S12? Do they both use all the same parts (I used a tapco G2 FCG) Quote Link to post Share on other sites
reoiv 1 Posted June 1, 2007 Report Share Posted June 1, 2007 I just finished my own conversion of a .223 to US parts/pistol grip etc. How similar is this process for the S12? Do they both use all the same parts (I used a tapco G2 FCG) From what I have seen with the S12 you don't have to modify the feed ramp at all otherwise they are pretty much the same. Quote Link to post Share on other sites
quinci956 1 Posted June 1, 2007 Report Share Posted June 1, 2007 I just finished my own conversion of a .223 to US parts/pistol grip etc. How similar is this process for the S12? Do they both use all the same parts (I used a tapco G2 FCG) I used all of the same parts in mine. I used the Power Custom SAR trigger in both so I did not need to do any alteration to the trigger. Evidently they stopped making the SAR trigger but the Tapco will work. The trigger guard goes on a little different because of the shape of the mag release lever. I also understand that the Tapco hammer has to be messaged a little. There are other trigger groups named in this site that I understand will drop right in. I was just happy I did not have to add a bullet guide. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.