Final questions before the big leap!

[rickstcarr 0]

I will be using the Saiga Conversion Guide located here: http://www.cross-conn.com/Saiga_Conversion/

 

This guide is for the .223 and I noticed a few different things on here I really don't think I'll need to mess around with (right?) such as bullet guide and magazine modding for a Saiga 12 Gauge right?

 

Can anyone who's done a Saiga conversion tell me anything I need to know and not know based off of this guide?

 

Thanks!

[nalioth 405]

Have you looked at the technical forum here at all?

 

Most of your questions will be answered.

[Navy87Guy 1]

You won't have to cut the opening for the trigger, but you will have to cut the hole for the pistol grip nut. You are correct - no need to worry about a bullet guide or magazine mods with the S12.

 

I've put a few other helpful hints and links on my Saiga conversion page.

 

Jim

[Mindfork 0]

I don't have to cut the trigger opening on an s-12?? NICE. That was a big one keeping me from going the conversion route. Jim, your site is a VERY helpful addition to the cross-conn guide. So much info is scattered over dozens of posts, that putting it all together for a noob is pretty hard.

 

You won't have to cut the opening for the trigger, but you will have to cut the hole for the pistol grip nut. You are correct - no need to worry about a bullet guide or magazine mods with the S12.

 

I've put a few other helpful hints and links on my Saiga conversion page.

 

Jim

[gunnysmith 4]

Edited October 12, 2007 by gunnysmith