mib2nd 1 Posted January 11, 2008 Report Share Posted January 11, 2008 I know I was quite confused when trying to figure out 922R compliance, so I put together a simple spreadsheet to make it a little more simple. You can go to my website link and download a copy. You do need Microsoft Excel: http://sharperimaging.net/saiga/ Quote Link to post Share on other sites
ajackb 0 Posted January 11, 2008 Report Share Posted January 11, 2008 http://sharperimaging.net/saiga/ Thanks. Very good way to keep track of the build and saved me from making my own. Quote Link to post Share on other sites
Psee 0 Posted January 11, 2008 Report Share Posted January 11, 2008 Nice spreadsheet! Thanks for helping out some of us newbs. I just wish I knew which parts were CHEAP to replace... Quote Link to post Share on other sites
mib2nd 1 Posted January 12, 2008 Author Report Share Posted January 12, 2008 (edited) Nice spreadsheet! Thanks for helping out some of us newbs. I just wish I knew which parts were CHEAP to replace... The cheapest will run you about $90.00 in parts., but you have to look around and does not include shipping. -US Stock $29.99 Tapco -US Pistol grip $10.99 Tapco -Trigger group (FCG) single hook $31.99 Tapco (will need to be machined) -Pistol Grip Screw and Nut $6 DPH Arms or $7.99 @ Tapco -Screws to attach trigger gaurd $1.00 -Nylon plugs for filling holes drilled out $1.25 Ace -AK L-Shaped Wire Retaining Spring $3.99 Tapco or e-clips for pivot pins. You may want to order some parts like the trigger group from Danzig or Tromix. I have ordered from Danzig and he machined my parts and they were ready to install. Good Luck. Edited January 12, 2008 by mib2nd 1 Quote Link to post Share on other sites
Psee 0 Posted January 12, 2008 Report Share Posted January 12, 2008 Nice spreadsheet! Thanks for helping out some of us newbs. I just wish I knew which parts were CHEAP to replace... The cheapest will run you about $90.00 in parts., but you have to look around and does not include shipping. -US Stock $29.99 Tapco -US Pistol grip $10.99 Tapco -Trigger group (FCG) single hook $31.99 Tapco (will need to be machined) -Pistol Grip Screw and Nut $6 DPH Arms or $7.99 @ Tapco -Screws to attach trigger gaurd $1.00 -Nylon plugs for filling holes drilled out $1.25 Ace -AK L-Shaped Wire Retaining Spring $3.99 Tapco or e-clips for pivot pins. You may want to order some parts like the trigger group from Danzig or Tromix. I have ordered from Danzig and he machined my parts and they were ready to install. Good Luck. Great info! I was getting apprehensive about the cost but it sounds like it can be done fairly inexpensively. Thanks mib2nd Quote Link to post Share on other sites
mib2nd 1 Posted January 15, 2008 Author Report Share Posted January 15, 2008 Nice spreadsheet! Thanks for helping out some of us newbs. I just wish I knew which parts were CHEAP to replace... The cheapest will run you about $90.00 in parts., but you have to look around and does not include shipping. -US Stock $29.99 Tapco -US Pistol grip $10.99 Tapco -Trigger group (FCG) single hook $31.99 Tapco (will need to be machined) -Pistol Grip Screw and Nut $6 DPH Arms or $7.99 @ Tapco -Screws to attach trigger gaurd $1.00 -Nylon plugs for filling holes drilled out $1.25 Ace -AK L-Shaped Wire Retaining Spring $3.99 Tapco or e-clips for pivot pins. You may want to order some parts like the trigger group from Danzig or Tromix. I have ordered from Danzig and he machined my parts and they were ready to install. Good Luck. Great info! I was getting apprehensive about the cost but it sounds like it can be done fairly inexpensively. Thanks mib2nd Also depending on which Saiga you have, you may also need a gas piston $30-$45 Danzig or Tromix. See the Spreadsheet. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.