Jump to content

My Conversion PICS


Recommended Posts

Thanks, it was worth it to do it my self,

I am still not giving up my spot on the Tromix waiting list though,

#493!! I need to get another s12 for that!

Just waiting for a drum now,..

Edited by Gas Giant
Link to post
Share on other sites

The stock adapter is from Davids Collectibles

 

http://www.tickbitesupply.com/stocks.html

 

The rear sights are just the remains of the 109 sighting rail I removed, it is all kinds of out of whack from the factory

I still have to sight it in, but it looks like a really good match up to the raised front sight so far. there is a small pin that retained the rail at the back that I put back in, and it seems to line up with the top of the front sight. I will check accuracy and report back.

Link to post
Share on other sites

I get to find out tomorow

Haven't fired it yet,

I have really long arms so I wanted an adjustable stock for my wife to shoot to I can rest my cheek on top of the stock and site down the barrel nicley.

wish I has some broken arrow break in lube for tomorow,..

 

I'll post results

 

 

Nice looking gun man. How's the stock angle/comfort while shooting it?
Edited by Gas Giant
Link to post
Share on other sites

just got back from shooting,

The good News: I fired 175 rounds

The bad news: see good news above

 

The gas selector switch #'s 1 and 2, I keep getting those confused

#1 for the low power, #2 for high power.

 

I am so stoked, there was a recoil buffer installed on this gun when I bought it, so I left it there, I forgot to take it off today to see how it worked with out it.

 

the higher power ammunition cycled perfect, the lightest light target loads did not cycle worth a crap

there were some in-between rounds that I really liked I marked the boxes as I was shooting to remember.

I'll report on those later.

 

The gun seemed to want to shoot high and a little left, but I haven't completed sighting in yet,.. oh and the muzzle brake flew off at about 75 rounds, it was not damaged, just came loose.

 

I think my shoulder is going to be sore

 

I really like the CAR 4 position stock, I could use a raised cheek rest I think about 3/4" or so.

 

:killer: :killer: :killer::super: :super: :super: :super:

 

 

Nice looking gun man. How's the stock angle/comfort while shooting it?
Link to post
Share on other sites

Gas Giant the gas selector the Saiga is 1 for high power and 2 for low power. They way that I remember is 1 is a smaller number then 2 is. Smaller = less gas.

 

From Tromix http://www.tromix.com/Welcome.htm Then go to Saiga service tips on left side of page.

 

Shotty is looking nice.

Edited by Racer 27
Link to post
Share on other sites

Oh crap you are right,...

let's see #1 is for high power and only let's one part of the gas gas through, because it is so high power, that's all it needs,

 

#2 is for low power because it lets twice the amount of gas through,,. to cycle correctly.

 

GOT IT!

 

Thanks,

 

 

Gas Giant the gas selector the Saiga is 1 for high power and 2 for low power. They way that I remember is 1 is a smaller number then 2 is. Smaller = less gas.

 

From Tromix http://www.tromix.com/Welcome.htm Then go to Saiga service tips on left side of page.

 

Shotty is looking nice.

Edited by Gas Giant
Link to post
Share on other sites

I am getting this next,..

 

http://cgi.ebay.com/VERTICAL-GRIP-WITH-BUI...1742.m153.l1262

 

 

Then a green laser to fit,..the PG

 

Installed the ultimak gas tube sight rail,...

 

http://ultimak.com/m11-s.htm

 

Waiting for the red/green dot sight ,...

 

and then it will be done,..except I am thinking about another stock, this one does sit a little high, although I do like the adjustability. The Tapco AK Triangle side folder looks pretty good, anyone have experience good or bad with those?

These are sweet!

 

http://www.tapco.com/proddesc.aspx?id=3835...42-c6aa62cf8691

Edited by Gas Giant
Link to post
Share on other sites

What is the best way to secure a brake or choke? My Polychoke would come loose after only a few mags so I was constantly keeping an eye on it.

 

Until I blue locktited it. The only problem then was I bent the tool trying to remove it, and never did get it to budge...

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...