DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 (edited) Ok... here we go with my baby again. Had it for quite a while, just re did the front end and got some new optics. Chopped up my airsoft gun for the front end hahaha. Has the dual catch for the striker and i added a recoil buffer. Had to make things CALI legal so i made the folding stock non folding and added the Raddlock maglock. Took some modification but it works pretty well. Just been running Golden/Silver bear slugs and buckshot through it with no problems. Like to get a 10rd mag for it eventually. Or i suppose i could make one with the second mag i have on order. Edited August 13, 2008 by DonJoe Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 Quote Link to post Share on other sites
G O B 3,516 Posted August 13, 2008 Report Share Posted August 13, 2008 The twins. These are the wife's, i made her these because she shoots from the hip and is into the "evil black " gun thing. Quote Link to post Share on other sites
kresk 10,063 Posted August 13, 2008 Report Share Posted August 13, 2008 Ok... here we go with my baby again. Had it for quite a while, just re did the front end and got some new optics. Chopped up my airsoft gun for the front end hahaha. Has the dual catch for the striker and i added a recoil buffer. Had to make things CALI legal so i made the folding stock non folding and added the Raddlock maglock. Took some modification but it works pretty well. Just been running Golden/Silver bear slugs and buckshot through it with no problems. Like to get a 10rd mag for it eventually. Or i suppose i could make one with the second mag i have on order. The infamous 'evil' barrel shroud. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted August 13, 2008 Author Report Share Posted August 13, 2008 That looks pretty cool on there. Does it go up? No...seriously though, that looks very original. The HG is intriguing too. Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 Ok... here we go with my baby again. Had it for quite a while, just re did the front end and got some new optics. Chopped up my airsoft gun for the front end hahaha. Has the dual catch for the striker and i added a recoil buffer. Had to make things CALI legal so i made the folding stock non folding and added the Raddlock maglock. Took some modification but it works pretty well. Just been running Golden/Silver bear slugs and buckshot through it with no problems. Like to get a 10rd mag for it eventually. Or i suppose i could make one with the second mag i have on order. The infamous 'evil' barrel shroud. Ha... yea.. i just didnt like the tiny little barrel of the 410 sticking out so far. This makes it look much more beefy. I did that back in 05 when i first got the gun. Then did the forgrip change about a week ago. Quote Link to post Share on other sites
DonJoe 0 Posted August 13, 2008 Report Share Posted August 13, 2008 That looks pretty cool on there. Does it go up? No...seriously though, that looks very original. The HG is intriguing too. The forgrip is off of my G36. I cut it short and turned it upside down to have it fit using strong mounting points... My buddy was all, Oh man my AR is soo cool. Then i pulled out the Saiga. Now he wants one. hahaha Quote Link to post Share on other sites
takezo 0 Posted August 31, 2008 Report Share Posted August 31, 2008 What capacitiy do the Saiga .410 magazines have? 10? 15? 20? or more? Has someone come out with a drum (absolutely awesome idea) for these slayers? If I didn't live in the PRK, I'd pick up one of these. Fortunately I may be moving to Nevada soon. Are .410's still available? T Quote Link to post Share on other sites
Twinsen 86 Posted August 31, 2008 Report Share Posted August 31, 2008 410's are the easiest Saiga to get, and cheapest. They have 4 and 10 round magazines. Quote Link to post Share on other sites
Bayoupiper 738 Posted October 11, 2008 Report Share Posted October 11, 2008 1 Quote Link to post Share on other sites
Superhawk138 202 Posted October 11, 2008 Report Share Posted October 11, 2008 That thing is sweet Will. Quote Link to post Share on other sites
Bayoupiper 738 Posted October 11, 2008 Report Share Posted October 11, 2008 Thanks! Quote Link to post Share on other sites
evildog 20 Posted October 12, 2008 Report Share Posted October 12, 2008 Will, i want to come live at your place. Sweet gun. nice 1 Quote Link to post Share on other sites
Bayoupiper 738 Posted October 12, 2008 Report Share Posted October 12, 2008 It uses a Krink piston in the shrtened gastube. Has HK sights & Forearm and a Choate MP5 sidefolder And yes, it is a Red Jacket...... Quote Link to post Share on other sites
Twinsen 86 Posted October 13, 2008 Report Share Posted October 13, 2008 That's the nicest .410 I can remember seeing. Quote Link to post Share on other sites
Nevar242 0 Posted November 6, 2008 Report Share Posted November 6, 2008 Highest complements Quote Link to post Share on other sites
phagar 1 Posted January 26, 2009 Report Share Posted January 26, 2009 There sure doesn't seem to be much traffic in this part of the forum. Are the 410's that unpopular compaired to the 12's and others? It would be cool to see a photo thread with some of your 410 conversions. That one over in the 12 guage section is awesome. If I can figure out how to post an image I will put up a before pic. As a weapons manufacturer I developed this prototype with the idea in mind for a law enforcement entry weapon. It is select fire either semi or three shot burst. With a folding stock and the 11" barrel it is as compact as the H&K-MP5 and is also more versatile due to the available of more varied types of ammunition. Since these pictures were taken in 2000 it now has a serrated standoff. This prototype has completed a very rigorous testing phase with no failures to date. Quote Link to post Share on other sites
stiletto raggio 20 Posted January 29, 2009 Report Share Posted January 29, 2009 How do you get it to function with the barrel cut so short and nothing shortened on the gas system? I ask because I want to cut one down and weld on a barrel device to meet legal requirements. Very nice! Quote Link to post Share on other sites
Superhawk138 202 Posted February 17, 2009 Report Share Posted February 17, 2009 Posted in scattered areas on the board but here it is with a yugo lower handguard retainer. Quote Link to post Share on other sites
super jim 14 Posted March 19, 2009 Report Share Posted March 19, 2009 Simple conversion with vented forestock, shortened barrel with weld-on 74 break (18.1" overall). Quote Link to post Share on other sites
stiletto raggio 20 Posted March 19, 2009 Report Share Posted March 19, 2009 (edited) Jim, Where did you get a weld-on brake? I thought Dinzag's were all threaded. And did you have to do anything to the gas system to get it to function reliably? Edited March 19, 2009 by stiletto raggio Quote Link to post Share on other sites
luminaughty 5 Posted May 28, 2009 Report Share Posted May 28, 2009 Custom U.S. made flash hider, G2 fire control parts, Tapco piston, Tapco stock and grip, Original Russian front sight, Camo finish, and U.S. made mag. Quote Link to post Share on other sites
sKott 26 Posted May 28, 2009 Report Share Posted May 28, 2009 OK you forced me... I'll post some picts of the 410 conversion I did for my 9 yr old son. Specifications: Saiga .410 with 21.5" barrel Russian AK100 folding stock and front retainer latch Russian AK100 Rear Trunnion Extra holes Welded Pistol Grip Plate Welded AK74 Trigger Guard Tapco Trigger Group Modified for BHO by Dinzag Arms Trigger modified to limit over travel Tromix gas Piston K-Var Pistol Grip DPH Arms 7 slot Flash Hider 2 - Russian 3" 4 Round Mags 2 - Russian 3" 10 Round Counter Mags Still need to Moly Res it to call it complete but she sure shoots and the over travel limiter works!!! Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted May 28, 2009 Author Report Share Posted May 28, 2009 Some sweet 410s there guys! Lots of folks have no idea what they are missing with these guns. sKott the OTL mod on the trigger looks good. I love the difference that mod makes myself. Great job on the poly folder too. Need to get one of those sometime.... Just got one of those DPH hiders myself. They ROCK! That sure was cool for some innovative minds to come together and make that happen! Quote Link to post Share on other sites
phagar 1 Posted August 6, 2009 Report Share Posted August 6, 2009 How do you get it to function with the barrel cut so short and nothing shortened on the gas system? I ask because I want to cut one down and weld on a barrel device to meet legal requirements. Very nice! Nothing was changed on the gas system . The only ammo it will work with is the 3" mag. . Quote Link to post Share on other sites
Lorie Ann 11 Posted August 9, 2009 Report Share Posted August 9, 2009 Just got my pistol grip conversion back along with a tune up on the bolt carrier and a cool new paint job!! Quote Link to post Share on other sites
Bayoupiper 738 Posted August 9, 2009 Report Share Posted August 9, 2009 Just got my pistol grip conversion back along with a tune up on the bolt carrier and a cool new paint job!! I usually don't like "girlie" colors on weapons, but that not only looks cool, but fits you! So when are you taking it to the pit??? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.