jerrycurlin 0 Posted June 12, 2008 Report Share Posted June 12, 2008 I have a Saiga conversion(Tennesse Guns). I want to put on a ATI 5 position stock. I unscrewed the back 2 screws but the buttstock won't come loose. Anyone else modify this configuration? Thanks Quote Link to post Share on other sites
nalioth 405 Posted June 12, 2008 Report Share Posted June 12, 2008 Patience goes a long way when posting. Click once, go have a coffee and come back. Check the bottom for more screws holding the stock on. If you don't see any more screws, a rubber hammer on the very end can help it out. Quote Link to post Share on other sites
ajackb 0 Posted June 13, 2008 Report Share Posted June 13, 2008 +1 on Nalioth's comments. Some of the stocks fit very tight and require a bit of persuasion to get out and of course make sure the bottom screw is also out. Quote Link to post Share on other sites
crunchy53 0 Posted June 13, 2008 Report Share Posted June 13, 2008 so why did you post 4 threads on this??? Quote Link to post Share on other sites
jerrycurlin 0 Posted June 13, 2008 Author Report Share Posted June 13, 2008 so why did you post 4 threads on this??? Sorry, my server was extra slow. My Saiga has revits so I might be out of luck. Thanks for your help. Quote Link to post Share on other sites
AZsaiga 0 Posted June 13, 2008 Report Share Posted June 13, 2008 so why did you post 4 threads on this??? Sorry, my server was extra slow. My Saiga has revits so I might be out of luck. Thanks for your help. Rivits holding the Stock ? There should be 3 skrews two on top and One on the bottom. Quote Link to post Share on other sites
crunchy53 0 Posted June 13, 2008 Report Share Posted June 13, 2008 http://www.youtube.com/watch?v=XU96VbnSoTc...feature=related that video shows him removing the stock and shows the screws. hope that helps. good luck Quote Link to post Share on other sites
22_Shooter 1,560 Posted June 13, 2008 Report Share Posted June 13, 2008 There's a screw under the recoil spring you have to remove to get the stock off. Slap it and call it a "bitch", and it will come off eventually. Quote Link to post Share on other sites
TacoMalo 0 Posted June 15, 2008 Report Share Posted June 15, 2008 There's a screw under the recoil spring you have to remove to get the stock off. Slap it and call it a "bitch", and it will come off eventually. That's exactly how to do it! Quote Link to post Share on other sites
jerrycurlin 0 Posted June 17, 2008 Author Report Share Posted June 17, 2008 I have a Saiga conversion(Tennesse Guns). I want to put on a ATI 5 position stock. I unscrewed the back 2 screws but the buttstock won't come loose. Anyone else modify this configuration? Thanks I put it on last night. It took a lot of modification to get the ATI stock to fit(hammer was involved). I am impressed with the quality of the stock. Thanks for all that gave their input. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.