Jump to content

A couple decent templates for cutting pistol grip hole


Recommended Posts

These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion.

 

Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut.

 

The images might look big, but they printed out at normal / actual size when I printed them.

 

 

If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both:

 

http://rapidshare.com/files/127778462/ak_p...e_templates.zip

 

 

post-7122-1215409691_thumb.jpg

post-7122-1215409413_thumb.jpg

Edited by KC913
  • Like 14
Link to post
Share on other sites
  • 9 months later...

The template was PERFECT! Thanks a ton for having this available. I searched all over the board before finding this post. All of the videos and posts I was able to find talked about what to do-but not the measurements that I needed. Thanks again.

 

 

 

These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion.

 

Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut.

 

The images might look big, but they printed out at normal / actual size when I printed them.

 

 

If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both:

 

http://rapidshare.com/files/127778462/ak_p...e_templates.zip

 

 

post-7122-1215409691_thumb.jpg

post-7122-1215409413_thumb.jpg

Link to post
Share on other sites

thats great. it should be a sticky.

 

i just used a virgin ak receiver and scribed the hole.

 

The template was PERFECT! Thanks a ton for having this available. I searched all over the board before finding this post. All of the videos and posts I was able to find talked about what to do-but not the measurements that I needed. Thanks again.

 

 

 

These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion.

 

Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut.

 

The images might look big, but they printed out at normal / actual size when I printed them.

 

 

If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both:

 

http://rapidshare.com/files/127778462/ak_p...e_templates.zip

 

 

post-7122-1215409691_thumb.jpg

post-7122-1215409413_thumb.jpg

Link to post
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...
These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion.

 

Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut.

 

The images might look big, but they printed out at normal / actual size when I printed them.

 

 

If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both:

 

http://rapidshare.com/files/127778462/ak_p...e_templates.zip

 

 

post-7122-1215409691_thumb.jpg

post-7122-1215409413_thumb.jpg

 

Thanks so much this is the kind of thing that makes a guy proud to be an American, all the help in the world and no charge

 

Thanks

paul

Edited by wizard5000
  • Like 1
Link to post
Share on other sites
  • 10 months later...

These templates will work with the Saiga 12 as well. I just noticed some people asked and nobody verified it. I just used the template on a Saiga 12 I converted with no problems. All you're doing is lining up the trigger hole to cut a pistol grip hole in the proper place. It should work with any AK receiver that doesn't have a pre-cut PG hole.

Link to post
Share on other sites
  • 7 months later...

Bumping this just because it's useful.

 

And why the fuck did "blades" -1 me on the original post? :unsure:

 

Re-uploaded the files to Rapidshare and Hotfile:

 

http://rapidshare.com/files/440856978/ak_pistol_grip_hole_templates.zip

 

http://hotfile.com/dl/94312962/7c3ce9f/ak_pistol_grip_hole_templates.zip.html

Link to post
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...