Cpt_Kirks 0 Posted July 18, 2008 Report Share Posted July 18, 2008 How do you remove the stock front sight? I thought I had seen a thread telling how, but can't find it. Quote Link to post Share on other sites
cscharlie 107 Posted July 18, 2008 Report Share Posted July 18, 2008 They can be a real bearcat. One I decided to remove had been pressed on with what appeared to be some welding slag on the inside of the sleeve. Ended up cutting that one off. I believe cobra762 did a tutorial on this subject and posted it in the Tech section of the forum. Quote Link to post Share on other sites
Bonesaw 1 Posted July 20, 2008 Report Share Posted July 20, 2008 They can be a real bearcat. One I decided to remove had been pressed on with what appeared to be some welding slag on the inside of the sleeve. Ended up cutting that one off. I believe cobra762 did a tutorial on this subject and posted it in the Tech section of the forum. it depends on what type of front sight you have. If it is threaded on, you can just unscrew it. If its pinned on (as most now are) you have to grind it down and drill it out. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.