Mr Smith 0 Posted January 7, 2009 Report Share Posted January 7, 2009 I want to add a Tapco T6 Stock and a Muzzle compensator and 30 round mag What parts part do I need to replace to be 922r? I have read a lot of info on this great forum , but I'm confused as hell! Please help. Thanks, Ranger Quote Link to post Share on other sites
22_Shooter 1,560 Posted January 7, 2009 Report Share Posted January 7, 2009 I want to add a Tapco T6 Stock and a Muzzle compensator and 30 round mag What parts part do I need to replace to be 922r? I have read a lot of info on this great forum , but I'm confused as hell! Please help. Thanks, Ranger The first post in this section.... http://forum.saiga-12.com/index.php?showtopic=18530 .... will let you know what parts "count" when it comes to 922r. You never mentioned if you have a Saiga shotgun or rifle. For example, if it's a rifle, you pick at least 4 parts on the list in the link I posted, swap them out for US made versions, and you're set. Quote Link to post Share on other sites
cma g21 3 Posted January 7, 2009 Report Share Posted January 7, 2009 (edited) I want to add a Tapco T6 Stock and a Muzzle compensator and 30 round mag What parts part do I need to replace to be 922r? I have read a lot of info on this great forum , but I'm confused as hell! Please help. Thanks, Ranger I'm assuming you're asking about a Saiga rifle, since you ask about 30 round magazines. If so, it depends on where the mags are made. If US made, you'd be in compliance using them with the US made T6 stock (but not foreign mags, including the one that came with the gun, as you're adding a pistol grip - unless you swap out a few more parts). The US made pistol grip and muzzle device would not count towards compliance, since the rifles are not imported with either (however, adding a foreign pistol grip or muzzle device would increase the foreign parts count). Maybe this will help: http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance Edited January 7, 2009 by cma g21 Quote Link to post Share on other sites
nalioth 405 Posted January 7, 2009 Report Share Posted January 7, 2009 Maybe this will help: http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance This is a Saiga 12 forum 922r section sticky, btw. Quote Link to post Share on other sites
cma g21 3 Posted January 7, 2009 Report Share Posted January 7, 2009 Maybe this will help: http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance This is a Saiga 12 forum 922r section sticky, btw. Yes, I'm aware of it. I just wanted to give the direct link rather than a link to a link (just trying to save him a step). Thanks to Superhawk, and CMA G21 for this... http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance Quote Link to post Share on other sites
Mr Smith 0 Posted January 7, 2009 Author Report Share Posted January 7, 2009 I want to add a Tapco T6 Stock and a Muzzle compensator and 30 round mag What parts part do I need to replace to be 922r? I have read a lot of info on this great forum , but I'm confused as hell! Please help. Thanks, Ranger The first post in this section.... http://forum.saiga-12.com/index.php?showtopic=18530 .... will let you know what parts "count" when it comes to 922r. You never mentioned if you have a Saiga shotgun or rifle. For example, if it's a rifle, you pick at least 4 parts on the list in the link I posted, swap them out for US made versions, and you're set. Yes its the 7.62x39 rifle. So if I swap out the FCG and the gas piston I should be OK to put on my tapcoT6 stock and Muzzle compensator and 30 round mag. I have the pro-mag 30 rd mags so us made and the 10 rd mage that came with the rifle which is not US made! I know there are stickys on this subject but I'm just try to wade through the the BS and get the helpful knowledge you all have to share! So the FCG counts as 3 parts and the gas piston as one. which equal 4 parts...Am I correct? http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance still confuses me! Thanks Ranger Quote Link to post Share on other sites
cma g21 3 Posted January 7, 2009 Report Share Posted January 7, 2009 (edited) Yes its the 7.62x39 rifle. So if I swap out the FCG and the gas piston I should be OK to put on my tapcoT6 stock and Muzzle compensator and 30 round mag. I have the pro-mag 30 rd mags so us made and the 10 rd mage that came with the rifle which is not US made! I know there are stickys on this subject but I'm just try to wade through the the BS and get the helpful knowledge you all have to share! So the FCG counts as 3 parts and the gas piston as one. which equal 4 parts...Am I correct? http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance still confuses me! Thanks Ranger O.K., you're starting with 14 of the 922r listed foreign parts (Saiga rifle, as imported). -1 for US made Tapco T6 butt stock = 13 of the 922r listed foreign parts -0 for US made pistol grip (it wasn't imported with one) = 13 (note: if a foreign pistol grip is used, add 1) -0 for US made muzzle device (it wasn't imported with one) = 13 (note: if a foreign muzzle device is used, add 1) -3 for US made FCG = 10 (922r compliant) -3 for US made magazine = 7 (922r compliant) (note: still 10 and 922r compliant with foreign magazine) -1 for US made piston = 6 (922r compliant) (note: still 9 and 922r compliant with foreign magazine) So you're 922r compliant even without the piston (as long as you use US made pistol grip and muzzle device), no matter which magazines are used. Edited January 7, 2009 by cma g21 Quote Link to post Share on other sites
Mr Smith 0 Posted January 8, 2009 Author Report Share Posted January 8, 2009 Yes its the 7.62x39 rifle. So if I swap out the FCG and the gas piston I should be OK to put on my tapcoT6 stock and Muzzle compensator and 30 round mag. I have the pro-mag 30 rd mags so us made and the 10 rd mage that came with the rifle which is not US made! I know there are stickys on this subject but I'm just try to wade through the the BS and get the helpful knowledge you all have to share! So the FCG counts as 3 parts and the gas piston as one. which equal 4 parts...Am I correct? http://thegunwiki.com/Gunwiki/BuildSaigaVerifyCompliance still confuses me! Thanks Ranger O.K., you're starting with 14 of the 922r listed foreign parts (Saiga rifle, as imported). -1 for US made Tapco T6 butt stock = 13 of the 922r listed foreign parts -0 for US made pistol grip (it wasn't imported with one) = 13 (note: if a foreign pistol grip is used, add 1) -0 for US made muzzle device (it wasn't imported with one) = 13 (note: if a foreign muzzle device is used, add 1) -3 for US made FCG = 10 (922r compliant) -3 for US made magazine = 7 (922r compliant) (note: still 10 and 922r compliant with foreign magazine) -1 for US made piston = 6 (922r compliant) (note: still 9 and 922r compliant with foreign magazine) So you're 922r compliant even without the piston (as long as you use US made pistol grip and muzzle device), no matter which magazines are used. Thanks for all your help and Info! Happy New Year! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.