Wildblue 0 Posted January 22, 2009 Report Share Posted January 22, 2009 http://www.mississippiautoarms.com/index.p...products_id=357 If so would you do it again? I want to mount something like this. Any advice? http://www.opticsplanet.net/leatherwood-hi...t-es1x50tp.html Quote Link to post Share on other sites
mstranglr 9 Posted January 22, 2009 Report Share Posted January 22, 2009 http://www.mississippiautoarms.com/index.p...products_id=357 If so would you do it again? I want to mount something like this. Any advice? http://www.opticsplanet.net/leatherwood-hi...t-es1x50tp.html It would work. But IMO, I would mount that optic to an Ultimack gas tube. That way you can co-witness the red dot with your irons, and get a proper cheek-weld. Quote Link to post Share on other sites
Wildblue 0 Posted January 22, 2009 Author Report Share Posted January 22, 2009 Which one goes on a S .308? http://www.ultimak.com/BuyAK.htm Quote Link to post Share on other sites
Deussne 38 Posted May 10, 2009 Report Share Posted May 10, 2009 i think the same as the one for saiga 39 Quote Link to post Share on other sites
oxyehho 8 Posted May 10, 2009 Report Share Posted May 10, 2009 http://www.mississippiautoarms.com/index.p...products_id=357 If so would you do it again? I want to mount something like this. Any advice? http://www.opticsplanet.net/leatherwood-hi...t-es1x50tp.html I prefer a QD model - these semi-permanent ones are just a bitch to take off if you need to and they leave deep marks on the side rail. Quote Link to post Share on other sites
Thunderchild 0 Posted May 10, 2009 Report Share Posted May 10, 2009 Quote Link to post Share on other sites
oxyehho 8 Posted May 10, 2009 Report Share Posted May 10, 2009 Quote Link to post Share on other sites
vintagedude88 16 Posted May 11, 2009 Report Share Posted May 11, 2009 (edited) Edited May 11, 2009 by FrustratedInCali Quote Link to post Share on other sites
vintagedude88 16 Posted May 11, 2009 Report Share Posted May 11, 2009 Quote Link to post Share on other sites
vintagedude88 16 Posted May 11, 2009 Report Share Posted May 11, 2009 (edited) Double post. Edited May 11, 2009 by FrustratedInCali Quote Link to post Share on other sites
Thunderchild 0 Posted May 12, 2009 Report Share Posted May 12, 2009 I'm using this one. The top rail is attached to the mount using two screws. First thing I did was to reattach it with a light application of JB Weld then screwed it back on...just to be sure. This thing is solid as a rock. Is that bore centered or reasonably close to it? Mine was dead center. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.