cvhanh20 1,052 Posted March 17, 2009 Report Share Posted March 17, 2009 I haven't see anyone do this yet with their Porkypines, so I thought I'd show you guys some different patterns you can setup on your sticker. Here they are! Quote Link to post Share on other sites
DogMan 2,343 Posted March 17, 2009 Report Share Posted March 17, 2009 (edited) I like the three pronged approach. Seems like it would be easier to maximize penetration and less likely to hit bone. God, I'm sick. Edited March 17, 2009 by DogMan 1 Quote Link to post Share on other sites
cynical 8 Posted March 17, 2009 Report Share Posted March 17, 2009 I like the three-pronged approach too. It seems that would maximize your capacity over the fire, but keeps things spaced widely enough to avoid having your marshmallows on different prongs stick together. Quote Link to post Share on other sites
DrWho 10 Posted March 17, 2009 Report Share Posted March 17, 2009 what about a nice barb to catch fish with. i KNOW it sounds goofy.. but might be REALLY coo... Quote Link to post Share on other sites
mwessel 0 Posted March 29, 2009 Report Share Posted March 29, 2009 Cameron, what's the eta on the porky's? I'm need to install so I can get the correct measurements to do my SBS. My ATF form 1 is ready to rock. What is the length from the thread closest to the rear of the Porkypine to the rear of the porkypine? Trying to get an idea of how much barrel is left to the gas block when the porky is retracted. One more question maybe you can answer. On Form1, box 4e, That is the length of the barrel you will be creating...correct? no the length of the original barrel. Quote Link to post Share on other sites
cvhanh20 1,052 Posted March 30, 2009 Author Report Share Posted March 30, 2009 Cameron, what's the eta on the porky's? I'm need to install so I can get the correct measurements to do my SBS. My ATF form 1 is ready to rock.What is the length from the thread closest to the rear of the Porkypine to the rear of the porkypine? Trying to get an idea of how much barrel is left to the gas block when the porky is retracted. One more question maybe you can answer. On Form1, box 4e, That is the length of the barrel you will be creating...correct? no the length of the original barrel. I don't work on SBS so I don't know the forms, sorry. As far as the length, around 5.25" retracted, ETA around two weeks. Quote Link to post Share on other sites
scoutjoe 277 Posted March 30, 2009 Report Share Posted March 30, 2009 I enjoy having all 6 needles of death thank you very much... Quote Link to post Share on other sites
tilok360 0 Posted September 7, 2011 Report Share Posted September 7, 2011 im all about two spikes and 4 as back up...chaos can we order more spikes from you...im running low. 2 spikes works best for power and penetration in pig.human flesh and wont get hung up on bone will even go through the sternum also if you have the two spikes up and down you can shake your saiga from left to right bending the two spikes before yanking hard to remove your gun. when you are done and are cleaning your gun punch out the 2 spikes and place 2 more new ones ( note this is a joke ) Quote Link to post Share on other sites
XXXSilverXXX 11 Posted September 8, 2011 Report Share Posted September 8, 2011 i would not mind having one part of my barrel shroud to give it an even more kool look, though i doubt it would be possible. Quote Link to post Share on other sites
CPanther95 0 Posted November 29, 2011 Report Share Posted November 29, 2011 I like the 3 prong setup for large brats - 6 prong for standard ballpark franks. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.