lilguy 0 Posted July 15, 2009 Report Share Posted July 15, 2009 (edited) Whats the best tool to use to grind on the drums to get them to seat? Also this the gf valve, if I seat it tight it does not engage -1+. Its close but I need to back it off one turn to get it to engage all 4 detentes. Is this OK or not. Edited July 15, 2009 by lilguy Quote Link to post Share on other sites
madmax4x4 68 Posted July 15, 2009 Report Share Posted July 15, 2009 it is OK to back it off one turn to get it to engage all 4 detentes. And use a simple file to fit the drum, very little at a time. My guns are all pretty loose and I used a finger nail file. Quote Link to post Share on other sites
lilguy 0 Posted July 16, 2009 Author Report Share Posted July 16, 2009 Thanks Max. It took about 5 mins to file A and it snapped in. Quote Link to post Share on other sites
Shandlanos 1,470 Posted July 16, 2009 Report Share Posted July 16, 2009 I used a very fine file, though not quite as fine as a finger nail file. It took about five minutes to fit the drum snugly. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.