Jump to content

Rifled Saiga-12 Barrel in the works


Recommended Posts

I just ordered up the stuff to build a rifled Saiga-12 barrel. The blank will a Pac-Nor unit.

It should prove to be an interesting project and if it all works out OK, and is not too time consuming, I will consider offering them as a Tromix option.

 

Tony Rumore

Tromix Corp

  • Like 5
Link to post
Share on other sites

I just ordered up the stuff to build a rifled Saiga-12 barrel. The blank will a Pac-Nor unit.

It should prove to be an interesting project and if it all works out OK, and is not too time consuming, I will consider offering them as a Tromix option.

 

Tony Rumore

Tromix Corp

Is it possible to rig up some kind of a barrel interchange system so that the operator can change out the barrels in the field?

Link to post
Share on other sites

I prototyped a bolt-in barrel awhile back, and then later changed it to a pin-in-place quick change setup. It worked fine and the barrel was quite snug, but for a rifled slug gun, I think you would want a more rigidly fixed barrel.

  • Like 1
Link to post
Share on other sites

Oh yes should be a very sweet build can't wait to see that bad boy in action. I'm esp interested in how the Remington sabots preform out of her. Also very true for the anti rifle states, great platform both the ak and ar are great for doing what you want. I live in Texas so it would be more of a fun toy. I mainly hunt hogs, and use an HK91 or LMT MRP, but I'm always looking for something else to drop them like hot rocks. Lol only thing I have to look into is if the PVS 14 can take saiga 12 recoil. With the HK sights and rifled barrel the saiga should def be able to reach out and touch anything from 5-200m.

 

 

 

 

Thomas Burchsted

Edited by 1LSWON
  • Like 1
Link to post
Share on other sites

This will be really neat. I'm looking forward to seeing the range report on this baby. If I'm not mistaken a rifled sabot slug is approximately a .73 cal projectile and can range anywhere from around 275-400 grains, correct? With a rifled barrel in combination with the box fed magazine and overall benefits of the Saiga's AK platform I'd imagine this would be a pretty devastating and accurate setup out to around 100-150 yards.

 

 

Zach

KROSS FA

Link to post
Share on other sites

This will be really neat. I'm looking forward to seeing the range report on this baby. If I'm not mistaken a rifled sabot slug is approximately a .73 cal projectile and can range anywhere from around 275-400 grains, correct? With a rifled barrel in combination with the box fed magazine and overall benefits of the Saiga's AK platform I'd imagine this would be a pretty devastating and accurate setup out to around 100-150 yards.

 

 

Zach

KROSS FA

I prefer the subcaliber sabots .58 385gr @ 2300fps. They do not play games.

Link to post
Share on other sites

This will be really neat. I'm looking forward to seeing the range report on this baby. If I'm not mistaken a rifled sabot slug is approximately a .73 cal projectile and can range anywhere from around 275-400 grains, correct? With a rifled barrel in combination with the box fed magazine and overall benefits of the Saiga's AK platform I'd imagine this would be a pretty devastating and accurate setup out to around 100-150 yards.

 

 

Zach

KROSS FA

I prefer the subcaliber sabots .58 385gr @ 2300fps. They do not play games.

I do like "subcaliber" and ".58 385gr" in the same sentence! :)

Link to post
Share on other sites

Geeeez Tony, would you hurry and make this thing already! IF i have to get another call from Thomas about how awesome this build is going to be (yes, he call me daily. Its like having a bad disease, he just wont go away!), my head is going to explode!

 

J/K

 

Mr. Burchstead is GTG and a good friend of mine. If it wasnt for me this turkey would have never known what a Saiga was!

 

Not only that, I will be in line for one of these.

Edited by NataSS Inc
Link to post
Share on other sites

Geeeez Tony, would you hurry and make this thing already! IF i have to get another call from Thomas about how awesome this build is going to be (yes, he call me daily. Its like having a bad disease, he just wont go away!), my head is going to explode!

 

J/K

 

Mr. Burchstead is GTG and a good friend of mine. If it wasnt for me this turkey would have never known what a Saiga was!

 

Not only that, I will be in line for one of these.

 

 

Boyce always with the attitude lol. I give you complete credit for introducing me to Tromix. However, I take complete responsiblity for that clean ass AR I threw your way. Most oh all thanks for the shirt you got me.

 

Thomas

Edited by 1LSWON
Link to post
Share on other sites

http://www.remington.com/products/ammunition/shotshell/slugs/accuTip_bonded_sabot_slug.asp

 

http://www.lg-outdoors.com/proddetail.asp?prod=SS_29468

 

http://www.lg-outdoors.com/proddetail.asp?prod=SS_15474

 

here are a few of the ones I like, but I like the solid brass slug the most. I wish there were more available for reloading so I could have exactly what I want.

 

These range from 250gr-385gr

Edited by 1LSWON
Link to post
Share on other sites

Any way to make a quick-change barrel system like a flip lever? In the style of your average lower handguard retainer for an AK?

Even in the style of the Magpul Masada/Bushmaster ACR?

And if so, would a hot-swap mean having to build up another handguard/rail assembly around the second barrel? The idea of pop-drop-lock-BANG! out in the field, hopefully without having to re-zero the EOTech, has a certain appeal...

Link to post
Share on other sites

Any way to make a quick-change barrel system like a flip lever? In the style of your average lower handguard retainer for an AK?

Even in the style of the Magpul Masada/Bushmaster ACR?

And if so, would a hot-swap mean having to build up another handguard/rail assembly around the second barrel? The idea of pop-drop-lock-BANG! out in the field, hopefully without having to re-zero the EOTech, has a certain appeal...

 

 

I have several LMT MRPs that I can change barrels on by backing out two Allen head screws with a tq wrench. The barrel pulls out the front through the free float tube and then you slide in the new barrel with no loss of zero.

 

Tony is building this for me and we have not discussed quick change barrels at all. He has stated that he tested a system where you could quick change barrels on the ak platform, but I do not think that is where he is taking this build. I mean sure it would be cool and if he does great, but it would have zero impact on what I use this for, and the rifled barrel would most likely remain reguardless, and I'll explain why.

 

The whole reason for this build is to have a saiga that is accurate to 150m+ with a sabot slug. Now with the sabots if I want to fire shot I still can, but it has to be saboted shot. Which will cut down on the number of pellets, but only by a small amount. So with the rifled barrel I can do everything a smooth bore can do, but with added accuracy on the far reaches of the shotgun range.

 

As for the no loss of zero I think that would only come to play when switching from a smooth bore to the rifled barrel. That is for my application though.

 

 

Here is the area where I could see a need for quick change barrels. Let's say I have a SBS 8" and all I want to shoot is sabots, and it's an 8" rifled barrel. That would be great as an entry gun etc. Now let's say I also like to hunt deer and live in a shotgun only state. It sure would be nice to throw in a rifled barrel anywhere from 16-22" for that purpose. Now let's say I also love to hunt doves, and it would be nice to fire a smooth barrel of 20"+ for that purpose. At that point you would effectily have atleast 3 shotguns to do what your quick change saiga could do with simple barrel swaps.

 

I guess I can see the use for that and the cool factor would be pretty high I must say. The only thing I could see as a draw back would be the rigity (sp). I just don't truly know how rigid (sp) an AK with quick change barrels would be I mean there is no free lunch.

Link to post
Share on other sites

Who knows though I do know where there is a will there is a way. Tony may correct me, but I don't see how that could be easily done. Both the LMT MRP and the Noveski/Vltor MUR are "AR uppers," but they were completly redesigned to be quick change barrel uppers. They are much thinker in weak areas and designed to be what they are from the ground up, they are not just AR uppers you can switch barrels on. I'm not going to lie it would be out of control if at some point Tromix built their own AK from the ground up with that in mind. Then we would have a 100% US made AK, I would call in the TK. Here is my dream sequence buy Tromix AK or TK receiver then choose stock and trigger options. Then pick caliber from 410-.308 Nato. Have it marked multiple caliber and to switch caliber or Gage simply switch barrel, recoil rod, and BCG/gas piston, and change gas plug to the one for your caliber or Gage etc. Lol that would be one he'll of a gun!!!

Edited by 1LSWON
Link to post
Share on other sites

yes you read right 2800fps. I don't know how, but I'll look into it.

 

The long-awaited arrival is over. Our BLS-12 Ballistic Sabot is now in stock! It took over a year of prototyping and required the development of our own proprietary resin blend, but we got it right. We are finally ready to unveil our own 12 gauge sabot design. Our ballistic lab is launching Hornady .50 cal XTP pistol bullets (300 gr., 350 gr., & 500 gr.) at ultra-high velocities up to 2800 feet per second. We will also be offering a custom designed, fully non-toxic .50 cal bullet (300 gr.). * Maximum Accuracy - Built to maximize the performance of rifled slug barrels. * Non-Toxic Capability - Designed to accept a special 292 grain non-toxic bullet. * Versatile - Load a range of bullets from 300,350 to 500 grains to suit your game. * Tough - Originally designed and tested for tactical and national defense loads. Our special resin blend means that the BLS-12 can handle the toughest conditions and the hardest loads. * Cushioned Design - Our revolutionary Sabot Cushioning System (SCS) reduces spike pressures and allows for higher velocities. *A free load data sheet comes with every purchase.

  • Like 1
Link to post
Share on other sites

yes you read right 2800fps. I don't know how, but I'll look into it.

 

The long-awaited arrival is over. Our BLS-12 Ballistic Sabot is now in stock! It took over a year of prototyping and required the development of our own proprietary resin blend, but we got it right. We are finally ready to unveil our own 12 gauge sabot design. Our ballistic lab is launching Hornady .50 cal XTP pistol bullets (300 gr., 350 gr., & 500 gr.) at ultra-high velocities up to 2800 feet per second. We will also be offering a custom designed, fully non-toxic .50 cal bullet (300 gr.). * Maximum Accuracy - Built to maximize the performance of rifled slug barrels. * Non-Toxic Capability - Designed to accept a special 292 grain non-toxic bullet. * Versatile - Load a range of bullets from 300,350 to 500 grains to suit your game. * Tough - Originally designed and tested for tactical and national defense loads. Our special resin blend means that the BLS-12 can handle the toughest conditions and the hardest loads. * Cushioned Design - Our revolutionary Sabot Cushioning System (SCS) reduces spike pressures and allows for higher velocities. *A free load data sheet comes with every purchase.

 

WOW! deja Vu all over again! It seems the my Tromix TR-15 .50AE Sledgehammer, with 33 grains of H110, 350 LargePistol primer was clocking those same Hornady XTP 300gr bullets at about 2700 fps back in 04' when I was going through boxes of primers reloading and feeding that animal. Hmmm, so if my S-17 is smooth bore, I will have to have two weapons slung on my back to shoot the same bullet?

 

Ah, but the 8" barrel, like my BFR .50AE was giving me 2,500 fps with the same loading. The Desert Eagles w/6" about 2,250 ish. My problem was I kept shooting the chronys!!!!

I was also wanting to make a .50AE out of shotgun pellets in epoxy. But I would not know what I am doing.

 

I told Tony I will chrony the 00 Buck in the 8" S-17 when I get back.

And I will chrony the DE with the same run of .50AE.

Could I shoot just 1 or 2 of the BLS-12 in the smooth bore at 10 feet for crono purposes?

 

 

Ken

Link to post
Share on other sites

Well I ordered all of the crap I posted above. I think the 2800fps is a pipe dream for safety related reasons. I have reloaded shot shells before, but I was not going for fps. I have reloaded OO buck shot packed with sawdust to reduce the spread, but again they were only loaded to average high brass levels. I think 2000-2300 is more of a realistic max, but that is no BS for a slug weighing 350-400gr.

Link to post
Share on other sites

That is pretty out there I must say. However, the whole reason behind this build is to keep this a shot gun, and a non NFA weapon. I wanted a big hard hitting Saiga that was accurate, and more importantly accuracy at distance. With the rifle barrel and sabot slugs I will have a shotgun that is accurate to 200m. I will play around with hand loads and weights etc, and that range may even be increased. Also, this could be a very interesting shotgun for the people who can only hunt with shotguns in their states. For a brush gun this will be ideal, and I may even make a trip to Washington state to try my hand at something larger than a hog.

 

Now for a true rifle that was in .50, I wod love to see a saiga done by tromix in .500 S&W

Edited by 1LSWON
Link to post
Share on other sites

The large bore guns he has been building from the 12 ga from what I understand are still legal 12 gauges and not NFA weapons. I've read 13 pages and apparently it does have to have a NFA stamp because it can still use standard shot shells and is a single shot mechanism. Now the one he built a receiver for I imagine he has to get a stamp for. Of course he doesn't really mention any of the legal work he does on them.

 

Anyway I just posted the link to show some possibilties. Imagine using a renecked .50 cal bmg round in a saiga....................

Link to post
Share on other sites
  • 5 weeks later...

The large bore guns he has been building from the 12 ga from what I understand are still legal 12 gauges and not NFA weapons. I've read 13 pages and apparently it does have to have a NFA stamp because it can still use standard shot shells and is a single shot mechanism. Now the one he built a receiver for I imagine he has to get a stamp for. Of course he doesn't really mention any of the legal work he does on them.

 

Anyway I just posted the link to show some possibilties. Imagine using a renecked .50 cal bmg round in a saiga....................

 

 

As long as the barrel is the proper length it's good to go. For example my Remington 1100 came with a smooth bore, but I bought a rifled barrel for it, and it is still a shot gun. No trouble here, and that is one of the reasons I wanted to have one.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Chatbox

    Load More
    You don't have permission to chat.
×
×
  • Create New...