Cowtown 1 Posted May 15, 2010 Author Report Share Posted May 15, 2010 I am want put a 74 style muzzle brake on my x39. I have read about change out the FSB with the 74 style and putting a 24 mm brake on. But this sounds like a PIA... I have looked at this one... Need ya'll feed back on which way to go. Threaded AK-74 style AK Muzzle Brake New AK-74 Style Muzzle Brake for AK type 7.62x39 Rifles. 14mm Reverse thread. Made in USA, and stamped "made in USA". Item NameItem #Each Qty Threaded AK-74 style AK Muzzle Brake AK-Fhak006 $14.95 Cowtown, Go this route. Buy one of these: http://dinzagarms.co...2x39/74fsb.html Replace your current FSB with the one above. Then buy one of these: http://www.krebscust...shtml#ak74brake It is a true '74 type break but designed for the 7.62 round. It is what I did to mine. Thanks... Now if I just find someone in Ft. Worth to help me take off the old FSB and press on the new one.. Quote Link to post Share on other sites
Shellshock1918 1 Posted May 15, 2010 Report Share Posted May 15, 2010 how hard was it to remove the FSB Cut it off with a dremel. Just go slow and be careful. Quote Link to post Share on other sites
Shellshock1918 1 Posted May 15, 2010 Report Share Posted May 15, 2010 Thanks... Now if I just find someone in Ft. Worth to help me take off the old FSB and press on the new one.. You don't really need to "press" it on. Just take a mallet and something soft to absorb the impact and and tap it on till the holes line up with the slots cut on the bottom of the barrel. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.