starman 1 Posted June 23, 2010 Report Share Posted June 23, 2010 I am ready to move my Saiga 12 trigger forward and install a Tromix FCG. In your opinion, what is the best tutorial to follow to make this event as painless as possible? Thanks! Quote Link to post Share on other sites
BUFF_dragon 3 Posted June 23, 2010 Report Share Posted June 23, 2010 the one that I have found best is on Carolina Shooter Supply..... great videos 3 Quote Link to post Share on other sites
mscottrogers 56 Posted June 23, 2010 Report Share Posted June 23, 2010 (edited) this is what I used. http://www.cross-con...sion/Step_1.htm Only differences are you need to modify the retainer or buy one for a S12, you don't need a bullet ramp, you'll have to reshape the hammer (not necessary if you buy it already done,,,,tromix,dinzag,etc,,) . I like it because you can either leave your lap top up next to the project or print the pages and tap e them to the bench.I would polish everything while its out as well. While we're at it heres the bolt hold open mod to make it easier to install http://forum.saiga-1...showtopic=29971 Dinzags instructions on how to install....post number 4 http://forum.saiga-1...909 Mike D's info on what to polish post number 37 http://forum.saiga-1...showtopic=20234 trigger polish http://forum.saiga-1...showtopic=37172 krebs modified retainer number 22 http://www.krebscustom.com/PartsPages/KalashnikovParts.shtml Edited June 23, 2010 by utahhandyman Quote Link to post Share on other sites
Paulyski 2,227 Posted June 24, 2010 Report Share Posted June 24, 2010 http://www.youtube.com/watch?v=Yek8AfLlu-s&playnext_from=TL&videos=Iv_GSM2704E Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.