Quick Q? I already searched and came up empty

[localone 0]

Any help would be appreciated...My saiga 12 is having a problem shooting the low brass shells...and flawlessly shots the high brass winchester military..am i doing something wrong? thanks Guys

[Spartacus 1,619]

A good 40% of the posts on this forum are about that issue.

 

Is the gun stock... converted?

 

It may just need to be broken in or it may need some work to get it to shoot low brass.

 

Take a closer look in the S-12 section and you'll find a friggin' ton of info about this subject.

[localone 0]

A good 40% of the posts on this forum are about that issue.

 

Is the gun stock... converted?

 

It may just need to be broken in or it may need some work to get it to shoot low brass.

 

Take a closer look in the S-12 section and you'll find a friggin' ton of info about this subject.

Thanks for the quick response and yes it is stock...My first shotgun tring to figure out where to start thanks

[1liter 20]

What setting were you shooting the low brass on?

[Spartacus 1,619]

Put some Rem-Oil on the bolt and rails and try some Walmart Federal Target loads... the stuff that's like $20 for a carton of 100rds. If you are running Winchester target loads, forget it.... that stuff is too wimpy.

 

Also make sure the gas adjustment is on "2".

 

If you can't get the gun running with the Federal ammo, contact Cadiz (see their forum section) to see if you can get your gun looked at under warranty.

 

Let us know what happens.