diamondback 56 Posted November 7, 2010 Report Share Posted November 7, 2010 (edited) So, I've been looking for a way to build a particular belt-fed weapon from a game using live-iron mechanicals, and I figure a 12ga slug-gun is the easiest way to go large-bore without LBDD. Interim thought: adapting the RPK belt-feed design to fit the S12 as a starting point. The ultimate goal: the C-14 Impaler from StarCraft II, albeit as a conventional semiauto firearm rather than a select-fire gauss-rifle. The design: Image is from the instructions of a card-model I'm using as a reference. Dimensions look more like they're for the model than the "genuine article". Complications: the Impaler design is known to include both stiletto-bayonet and light integral to the forearm, and I can find no evidence of magazine, magwell or even sights (unless there's a targeting reticle projected inside the user's helmet). The big question: does this look like something S12 guts can be adapted to, or would I better off to start from "clean sheet of paper"? Edited November 7, 2010 by Diamondback Quote Link to post Share on other sites
vampire847 9 Posted November 7, 2010 Report Share Posted November 7, 2010 dude ive been thinking bout belt fed rpk style 12 gauge for years now>.> it is not crazy Quote Link to post Share on other sites
BuzzNectar 35 Posted November 7, 2010 Report Share Posted November 7, 2010 that would be stupid........STUPID CRAZY ASS FUN THAT IS although im sure you mean like an rpd or pkm,as it already is like an rpk. 1 Quote Link to post Share on other sites
Bridis 319 Posted November 7, 2010 Report Share Posted November 7, 2010 The design: The big question: does this look like something S12 guts can be adapted to, or would I better off to start from "clean sheet of paper"? I can see a converted s-12, with the gas block moved back and the barrel cut in there. Quote Link to post Share on other sites
gregomega 929 Posted November 7, 2010 Report Share Posted November 7, 2010 Im pretty sure someone on here has already made a belt fed s12. Forgot who, think maybe cobra or tromix. I've seen pics on here though, somewhere Quote Link to post Share on other sites
zenman223 460 Posted November 7, 2010 Report Share Posted November 7, 2010 cobra has a pic of a bandolier hangin out the side of an S-12, its not a belt fed gun. it just looks like it in the picture. I have however seen a beltfed shotgun on youtube and the guy is firing it but it looked to be some kind of homemade contraption from the ground up. As far as makin that design work with an S-12 I dont have much to offer except to say where theres a will, theres a way! Quote Link to post Share on other sites
pedal2alloy 206 Posted November 7, 2010 Report Share Posted November 7, 2010 So, I've been looking for a way to build a particular belt-fed weapon from a game using live-iron mechanicals, and I figure a 12ga slug-gun is the easiest way to go large-bore without LBDD. Interim thought: adapting the RPK belt-feed design to fit the S12 as a starting point. The ultimate goal: the C-14 Impaler from StarCraft II, albeit as a conventional semiauto firearm rather than a select-fire gauss-rifle. You'll shoot your eye out kid. Quote Link to post Share on other sites
dannyfantasy2000 68 Posted November 7, 2010 Report Share Posted November 7, 2010 RPK's are magazine fed just like an AK or Saiga. The belt fed PK machine gun was designed by Kalashnikov but is a medium machinegun and a very different weapon from the AK. I imagine it would be nearly impossible to adapt a Saiga 12 to function akin to a PK or be run belt fed. Attaching a feed cover and feed tray would be required, not sure how. The bolt and trigger system would have to use an open bolt setup also, this would be very difficult. I think it would be much easier to mess with a PK receiver and possibly use a modified S12 bolt and barrel. I could see some ejection issues with that though. Quote Link to post Share on other sites
mgconnor13 206 Posted November 8, 2010 Report Share Posted November 8, 2010 What if you made a drum attachment that had a feeding and de-linking mechanism in it and the whole thing attached like a drum/mag? it would need some type of power supply, could be a wind up spring or a motor and power pack Quote Link to post Share on other sites
yakdung 2,926 Posted November 8, 2010 Report Share Posted November 8, 2010 That would be too much fun. Found this: http://www.myspace.com/index.cfm?fuseaction=vids.individual&videoid=52596068 http://www.youtube.com/watch?v=iX7vwivR6cE Enjoy, Yakdung Quote Link to post Share on other sites
dannyfantasy2000 68 Posted November 8, 2010 Report Share Posted November 8, 2010 What if you made a drum attachment that had a feeding and de-linking mechanism in it and the whole thing attached like a drum/mag? it would need some type of power supply, could be a wind up spring or a motor and power pack That would probably be the best way to do it. It could be box like and flat perpendicular to the weapon. The feed pawls could be run if an extension to the bottom of the bolt protruded through the bottom of the receiver or magwell. Quote Link to post Share on other sites
dannyfantasy2000 68 Posted November 8, 2010 Report Share Posted November 8, 2010 What if you made a drum attachment that had a feeding and de-linking mechanism in it and the whole thing attached like a drum/mag? it would need some type of power supply, could be a wind up spring or a motor and power pack That would probably be the best way to do it. It could be box like and flat perpendicular to the weapon. The feed pawls could be run if an extension to the bottom of the bolt protruded through the bottom of the receiver or magwell. For a setup like that you would definitely have to crank up the gas system to 11. Quote Link to post Share on other sites
shades_of_grey 1,092 Posted November 8, 2010 Report Share Posted November 8, 2010 Diamondback; you're on crack, (not the first time I've thought so ). I'm sure a belt-fed S-12 would be possible.. but for the amount of modification/cost involved.. the fuck's the point? This is a 12-ga weapon, not some variety of .30 cal + rifle. It'll never fill the role that a SAW does, (nor should it). I s'pose ymmv.. but this just seems like something that might be interesting to talk about and consider, yet is utterly impractical and silly to actually build. 12-ga 20-rnd drums are good enough for me. Quote Link to post Share on other sites
shades_of_grey 1,092 Posted November 8, 2010 Report Share Posted November 8, 2010 What if you made a drum attachment that had a feeding and de-linking mechanism in it and the whole thing attached like a drum/mag? it would need some type of power supply, could be a wind up spring or a motor and power pack That would probably be the best way to do it. It could be box like and flat perpendicular to the weapon. The feed pawls could be run if an extension to the bottom of the bolt protruded through the bottom of the receiver or magwell. For a setup like that you would definitely have to crank up the gas system to 11. lol Yep, along with the amp. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted November 8, 2010 Report Share Posted November 8, 2010 cobra has a pic of a bandolier hangin out the side of an S-12, its not a belt fed gun. it just looks like it in the picture. I have however seen a beltfed shotgun on youtube and the guy is firing it but it looked to be some kind of homemade contraption from the ground up. As far as makin that design work with an S-12 I dont have much to offer except to say where theres a will, theres a way! That was an April Fools joke I played several years ago. Dinzag has a pic of it posted on his site and we still get a good laugh from it once in awhile when someone requests info on where to get one. Keep up the creative ideas there Diamondback. I like your imagination and desire to take things to a new level. Quote Link to post Share on other sites
gkcf 8 Posted November 8, 2010 Report Share Posted November 8, 2010 Problem is the rimmed rounds. If you put them on a belt, they have to be removed rearward. They can't just be shoved out of the belt and into the chamber like on an Mg-42, M-60, M-249, Stoner 63, etc. You'd need an action more like a Browning 1919 or M2. It could be done and it could be semi-auto but, it wouldn't be a saiga anymore when you got done. If you could come up with a belt design that would allow rimmed rounds to be forward stripped then, all you'd have to do is flip the gun upside down and add the needed bits. Quote Link to post Share on other sites
Superhawk138 202 Posted November 8, 2010 Report Share Posted November 8, 2010 Someone needs to make a 12 guage version of this. Quote Link to post Share on other sites
BobAsh 582 Posted November 8, 2010 Report Share Posted November 8, 2010 There's a ton of work and zero profit in that project...but we've still talked about it lol. Quote Link to post Share on other sites
diamondback 56 Posted November 9, 2010 Author Report Share Posted November 9, 2010 Thanks, guys. Idea: for a belt-fed 12ga, would it work to add a sleeve around the shell bringing it up to the rim's diameter? I envision a loose fit with some kind of stand-off tabs keeping the sleeve far enough from the rim for extractors to grab, the loose fit being so the extractor would rotate the tab out of the way if necessary. Big reason I leaped to an S12 action was I was thinking "a large-bore that I'm already studying, with a chance of not being a Large Bore Destructive Device", along with some degree of common spare-parts with Abomination and Vera--it does look like the Impaler is better adapted to something like a Ma Deuce or cut-down Barrett-style design. Post-A, the only thing I'm on is lots of caffeine, but I am obliged to note that I'm, ah... shall we say, "not totally sane"?lol Quote Link to post Share on other sites
gkcf 8 Posted November 10, 2010 Report Share Posted November 10, 2010 No, that wouldn't work. You'd have to find a way to remove this sleeve thing from the shell before it enters the chamber. The 12 gauge headspaces on the rim so, the shell forward of that, cannot really be altered. Quote Link to post Share on other sites
BobAsh 582 Posted November 10, 2010 Report Share Posted November 10, 2010 You guys are overthinking this. There are already belt-fed guns that use a rimmed cartridge. Quote Link to post Share on other sites
mike12345 18 Posted November 11, 2010 Report Share Posted November 11, 2010 I swear the same topics keep coming back... A PK machinegun uses a 7.62x54r the browning designs work but a 12ga will be a pain. The question is what benifits does it have over the mag fed... none. The gun will be heavyer and bulky. You would need a big box for the ammo belt also. Quote Link to post Share on other sites
BobAsh 582 Posted November 11, 2010 Report Share Posted November 11, 2010 It's not intended to be a "practical" innovation Mike. It certainly would be an attention-getter at the MG shoots. Quote Link to post Share on other sites
sharkbit 109 Posted November 11, 2010 Report Share Posted November 11, 2010 yeah, i'm still waiting for Tromix to make this..... LOL Quote Link to post Share on other sites
BobAsh 582 Posted November 11, 2010 Report Share Posted November 11, 2010 Well, Tony did make the .444 Marlin AK. Quote Link to post Share on other sites
sharkbit 109 Posted November 11, 2010 Report Share Posted November 11, 2010 Well, Tony did make the .444 Marlin AK. Nice! After seeing Tony's work I feel sadly deprived that I've never shot .458 SOCOM. Quote Link to post Share on other sites
McabanissII 2 Posted November 12, 2010 Report Share Posted November 12, 2010 LOL!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.