dStuck 0 Posted November 12, 2010 Report Share Posted November 12, 2010 (edited) ok well next friday im going too be ordering my Saiga 223 with the 20" barrel. im going too be using this gun for mostly longer distance target practice and just trying too get an idea on a good Scope/ mount combo and i want a low scope mount and heres what i've been lookin at so far, also do most mounts come with the part that actually attaches too the gun permanently or do you have too buy that separate havent really been able too find out: these are just what i've been looking at and am open too opinions and suggestions, this is my first gun btw Scope? ( willl the 50 even fit?? but not bad for the $? just want something that will hold Zero. : http://www.shopbarsk...Ir_mil_dot.html Rails: (UTG) http://compare.ebay....4=263602_304662 (UAG) http://compare.ebay....4=263602_304662 http://www.combathun...uble_Rails.html also what is the easiest/best/cheapest way( if there is such a way ) too mount a bi-pod on one of these? sling mount or mount a rail on the end of the foregrip? Edited November 12, 2010 by dStuck Quote Link to post Share on other sites
kevinfreel 215 Posted November 15, 2010 Report Share Posted November 15, 2010 the scope should work fine, the gun(if its unmolested) will have the side rail already riveted to it. any of those mount will work, but i wouldnt personally get the utg one witht he three screws to tighten it down. and with the bipod you could go either way without an issue Quote Link to post Share on other sites
pogy 5 Posted November 16, 2010 Report Share Posted November 16, 2010 I have a 20" .223 that I've converted. I use a POSP 4X scope and it works well at 100 yds shooting 3-4"" groups. I haven't used any of those rails but any should work as long as they snug up tight. If you take off the stock for-end, you can install a swivel stud (Uncle Mike's or similar) and use a Harris bipod or a cheaper knockoff http://www.amazon.co...d/dp/B0002INWLY I did and it worked well . I even moved the stud to the AK style for-end on my conversion. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.