Because of the current longer turnaround (I'm currently expecting within 12 weeks) I'm offering 25% off of all price packages listed below for a limited time.
Just multiply the below fees by .75 & that's the price you pay.
Example, a $500.00 package will be $374.99
Package prices are as follows;
MatchTrigger for $24.99 With any below service.
(note; The functional refinements are included in GlassBolt, this is just the grooving & re-bluing the lever.
It makes the trigger more refined, comfortable, and stops the left corner of the trigger from poking you in the end section of your index finger when firing from the hip. The Tapco FCG is functionally a great FCG because it's good steel, and the sear (trigger-hook on single action Kalashnikov based weapons) is at the perfect height for the S-12, unlike other FCGs with taller sears);
IceRack Full Carrier Resurface/Polish for $99.99 With Free Return Shipping. (Air Mail)
GlassBolt for $149.99 With Free Return Shipping. (Air Mail)
GlassBolt + Icerack for $224.99 With Free Return Shipping (Air Mail)
(that's the two products above together)
GlassBolt + your choice of Tromix Galil or Pauly's Piston Vertical/upturned Charging Handle finished in black for $329.99 With Free Return Shipping (Air Mail)
GlassBolt + Inner Demons Vertical Charger in black for $374.99 With Free Return Shipping (Air Mail)
GlassBolt + your choice of Tromix Galil or Pauly's Piston Left Side Horizontal Charging Handle in Black, and cut its slot in the dust cover, then A/O blast and re-paint the cover for $399.99 With Free Return Shipping (Air Mail)
GlassBolt + IceRack + Pauly's Piston Vertical / Upturned Charging Handle for $449.99 With Free Return Shipping (Air Mail), .
GlassBolt + IceRack + Inner Demons or High Roller Vertical / Upturned Charging Handle for $499.99 With Free Return Shipping (Air Mail).
GlassBolt + IceRack + Pauly's Piston or Tromix Galil Horizontal Left Side Charging Handle for $499.99 With Free Return Shipping (Air Mail)
*all prices contingent on parts not needing extra work to repair previous attempts at services I offer. (example; extra-gouged carrier from trying to do IceRack and starting with sanding disks or drums)
GlassBolt is the more functional mod where all the functional aspects of the bolt & carrier bottom are addressed for reliability & friction reduction, The FCG is tuned & although the parts are perfectly finished & beautifully polished, everything is form following function. The GlassBolt Special's fee is $99.99 with free Fed-Ex return shipping.
This is the definition of form following function.
The CARRIER finish is matte like below. (except for the highly treated jeweled bottom for lubrication retention)
You are free to request the carrier be left black if you desire & I'll only treat the very bottom like I do all GlassBolt mods please note this in the shipment.
This is the Glassbolt's carrier's basic matte finish;
Additional trigger lever refinement on top of the refinement already included with GlassBolt is an additional $25.00
Parts to include for GlassBolt are Bolt, carrier hammer disconnector, hammer spring, BHO if you have one, 1 axis pin (that I polish to smoothen the trigger pull that much more.) & payment
PLEASE DO NOT SEND ME EXTRA PARTS. I HAVE NO USE FOR THEM & IT ONLY INCREASES SHIPPING COSTS.
Parts to include for IceRack are simply the carrier & payment.
If your gun is unconverted, your hammer's already been professionally profiled, your trigger is already tuned, or you don't want to send the FCG for any reason, I'll knock $10.00 off the price of 149.99 for the GlassBolt Special.
If your gun's unconverted & you would like a trigger job & don't minding disassembling it, I CAN do the trigger job.
Being as the factory hammer does not need a profile though, many just send the bolt & carrier to save $10.00 & the hassle of FCG removal.
If getting a charging handle, please specify how your weapon is to be built, ie, factory sights, H&K sights, quad rail, etc...
I custom mount the handle to your application for the best results. My standard mount works well with or without quads & optics.
My close mount works well with flat-centered S-12's with weld-on H&K sights like pictured below, but would not be the best to be mounted next to optics.
Send parts, along with a cashier's check, Money Order, or personal check (US Postal Money Orders are the most secure form of payment available) to;
1050 Sunnyview RD. NE. Suite 8060
Salem OR. 97301
If you have no idea on how to remove the converted FCG, here's a little video I put together to give people an idea;
For reinstallation, check out Greg's (CSS) instructional;
Any questions, Email/PM I don't go through voicemail messages much, and I work crazy hours
Please be sure to include a return address. (not too important... If you forget, I'm pretty sure you'll eventually shoot me a call or 20) lol
Please indicate in the package if you would rather NOT have the paint removed & the carrier finished matte if I'm just doing GlassBolt.
Please include a phone # at which you can be reached just in case I have any immediate questions while working on pieces.
And lastly please…. Please… I know it's a given, but please specify what is to be done in a note in the package. A check alone & one's address doesn't tell me what I'm doing to the parts, what finish, be it black, matte steel, Ice racked, handle type, etc, so then I get stuck waiting to start if I'm not lucky enough to be able to find the conversation the work originated from & link a screen name to a given name to be able to clarify. I do a lot of custom & 1 off work.
Thank you very much for your patronage!
Edited by PauIy, 16 May 2013 - 01:39 AM.