Click here for shipping & payment info
WARNING!! THERE HAVE BEEN SEVERAL GLASSBOLT FRAUDS AS OF LATE.
THERE IS ONLY ONE GLASSBOLT.
GLASSBOLT IS A TRADEMARK OF PAULY'S STEELIN' CUSTOM FABRICATION.
IF, WHEN LOOKING AROUND, YOU ARE TOLD THAT SOMEONE ELSE DOES GLASSBOLT, DEMAND PICTURES. EVERY GLASSBOLT IS UNIFORM, MATCHED AND PRECISION MILLED THEN PROFESSIONALLY FINISHED. DON'T BE DUPED BY HACKSMITHS WITH RACKS OF DREMELS TRYING TO QUICKLY COPY WORK THEY HAD US DO. THEY'RE OUT THERE.
Pauly's Steelin' is offering Pauly's Glass Bolt System!!!
Bolt, Bolt Carrier, & FULL Fire Control Group Refinement/Fitting for the ridiculously low price of $149.99 with FREE insured shipping, and a FREE SET OF PRECISION PORT GAUGES which double as the perfect port cleaning tools!!!
GlassBolt S-12;
GlassBolt Rifle;
(with IceRack & Inner Demons VCH)
With this modification, Pauly's Steelin' will GREATLY reduce friction to assist the Saiga-12, Saiga-20, 410 & Rifles to achieve the utmost reliability & GREATLY improves ease of loading Magazines on a closed bolt!
-Pauly's Steelin' will mirror polish & Precisely Mill the Bolt to GlassBolt's proven profile
-Ramp & treat the underside of the carrier for optimal resistance reduction as the underside of the carrier resets the hammer into the disconnector as well as treat the surface for optimal lubrication retention
- treat the rail guides, recoil spring channel, all friction bearing parts on the fire control group, including the axis pin, to complete the smoothest Trigger pull available for both reliability & to make is slicker than... Well.... With a very clean break.
Pauly's Steelin' Custom Fabrication will also tune the extractor which includes repair, if factory defects effecting its movement are present, as well as tightening the retaining pins, Notching the BHO's spring reas for further reliability, and smoothing the button correctly for NO EXTRA CHARGE!!! (factory spring will be returned with unit)
All FCG work is matched to the carrier properly using shop specifications as well as tested for proper function.
Here's a video of the Pauly's Steelin's Self Resetting mainspring tuning in action. My springs CANNOT wander inward causing trigger resetting issues!
The utmost care is taken to ensure factory timing & maintain factory headspace.
This modification can be done to bolts & carriers in factory condition;
Or to add the finishing touches to work you or others previously performed;
(the utmost care & precise measurements will be taken to ensure optimal strength)
This service by Pauly's Steelin' Custom Fabrication may be the difference between a borderline reliable gun reaching reliability!
This modification from Pauly's Steelin Custom Fabrication helps greatly with cycling the lower powered rounds, especially through the various Saiga-12 drums, being as the springs are much stronger in the drums than stick mags. Pauly'Steelin' Custom fabrication's GlassBolt is the service preferred by the Drums designers!
Elsewhere, a much less refined, less comprehensive service has cost upward of $165, and LOCTITE is involved!!!!
(don't ask. lol)
At Pauly's Steelin' Custom Fabrication.
When our name is going out on it, it's got to be the best & we're the only shop proud enough to post close up, focused pictures of ANY of our finished work. All Ad pics are customer pieces, and many are customer supplied.
My trade secret is that nobody else has the drive to put the time into each piece, so there's no need to hide mine. 
Arrogant? No.
GlassBolt's EARNED its reputation.
It is standard practice at Pauly's Steelin Custom Fabrication to use the finest custom Mitutoyo precision measuring equipment throughout every step of the process to ensure the highest quality precision, repeatable workmanship & the profile is engineered to keep the bolt's strength for shooting high power loads. Pauly's Steelin' Custom Fabrication has never, and will never ruin the customers vital firearms parts because of this.
We measure and mill the pieces to keep the tolerances consistent unit it to unit being as the units are hand machined at the factory. The only way to do this is by treating each unit as an individual.
This is vital, due to the fact that this procedure, if not done properly, with precision equipment, can set up the firearm for the risk of slam-fire & endanger the end user.
Additionally Pauly's Steelin Custom Fabrication will media blast & treat the entire carrier to give a very sharply finished look, FOR NO EXTRA CHARGE!!!
Parts to include with your shipment;
1-bolt
2-carrier
3-hammer
4-trigger
5-disconnecter
6-1 axis pin (for trigger axis)
7-Mainspring
8-BHO
The industry leading, superior finish of this modification is guaranteed to increase the value of the firearm.
All orders include FREE Insured shipping!!!!!!
.
Click here for shipping & payment info
UPDATE!!
For $25.00 additional, I will further refine any Tapco's trigger lever to Pauly's Match Trigger Refinement!
This is in addition to the trigger work already included in GlassBolt.
