snatchss454 0 Posted January 27, 2011 Report Share Posted January 27, 2011 Hey guys, I was checking out the saiga-12 wiki page and at the bottom I noticed a link to a KS-K shotgun. After some more research I found this: http://www.izhmash.ru/eng/product/ks-k.shtml Im not sure if its been talked about here, but I searched and pulled up nothing. In the video it states that it has a magazine guide and bolt hold open and I was curious if any of this could be adapted to our saiga 12? Shane 1 Quote Link to post Share on other sites
beefcakeb99 572 Posted January 27, 2011 Report Share Posted January 27, 2011 Saiga Taktika mod 040? Quote Link to post Share on other sites
gregomega 929 Posted January 27, 2011 Report Share Posted January 27, 2011 Rus- military has em, saiga 12 ver. 030. Having a bit of trouble making it over here to the us. Saigatechusa builthis own. It's really tits! 1 Quote Link to post Share on other sites
danklab 57 Posted January 27, 2011 Report Share Posted January 27, 2011 (edited) Can't import the gun itself. I think the magwells can be obtained though.. if I'm not mistaken. And the Russian mags for the magwell cost a fortune. I don't believe the LRBHO can be obtained by itself as a standalone part. edit: I fucking want that S-12!!!! Edited January 27, 2011 by danklab Quote Link to post Share on other sites
evo 0 Posted January 27, 2011 Report Share Posted January 27, 2011 http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony Quote Link to post Share on other sites
beefcakeb99 572 Posted January 27, 2011 Report Share Posted January 27, 2011 That would be tits when they finally do arrive...but will likely be on the higher end of the price range$$ Quote Link to post Share on other sites
Darko 42 Posted January 27, 2011 Report Share Posted January 27, 2011 edit: I fucking want that S-12!!!! agreed Quote Link to post Share on other sites
Mullet Man 2,114 Posted January 27, 2011 Report Share Posted January 27, 2011 (edited) http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony Wonder if that falls under section 4 issue #6 of the ATF .pdf release regarding "sporting shotguns" since the rail is not on top of the receiver or barrel. That could be an importation issue with that model of sporterized S12. http://www.atf.gov/publications/firearms/012611-study-on-importality-of-certain-shotguns.pdf "Firearm Features In reviewing the shotguns used for those activities classified as sporting purposes, the working group examined State hunting laws, rules, and guidelines for shooting competitions and shooting organizations; industry advertisements and literature; scholarly and historical publications; and statistics on participation in the respective shooting sports. Following this review, the working group determined that certain shotgun features are not particularly suitable or readily adaptable for sporting purposes. These features include: (1) Folding, telescoping, or collapsible stocks; (2) bayonet lugs; (3) flash suppressors; (4) magazines over 5 rounds, or a drum magazine; (5) grenade-launcher mounts; (6) integrated rail systems (other than on top of the receiver or barrel); (7) light enhancing devices; (8) excessive weight (greater than 10 pounds for 12 gauge or smaller); (9) excessive bulk (greater than 3 inches in width and/or greater than 4 inches in depth); (10) forward pistol grips or other protruding parts designed or used for gripping the shotgun with the shooter’s extended hand. Although the features listed above do not represent an exhaustive list of possible shotgun features, designs or characteristics, the working group determined that shotguns with any one of these features are most appropriate for military or law enforcement use. Therefore, shotguns containing any of these features are not particularly suitable for nor readily adaptable to generally recognized sporting purposes such as hunting, trap, sporting clay, and skeet shooting. Each of these features and an analysis of each of the determinations are included within the main body of the report." Edited January 27, 2011 by Mullet Man Quote Link to post Share on other sites
gregomega 929 Posted January 27, 2011 Report Share Posted January 27, 2011 http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony I may be tarred and feathered for this but I kindof like the look of it unconverted with that stock. I put in my order a couple of days ago and am having trouble getting an invoice. I drop alittle dough on it....if its not rediculous. Quote Link to post Share on other sites
snatchss454 0 Posted January 27, 2011 Author Report Share Posted January 27, 2011 http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony I may be tarred and feathered for this but I kindof like the look of it unconverted with that stock. I put in my order a couple of days ago and am having trouble getting an invoice. I drop alittle dough on it....if its not rediculous. Agreed!! I think that gun looks ( . Y . )!!! I'm just curious if these mods are already available as aftermarket for our current Saiga 12's? Shane Quote Link to post Share on other sites
physicsnerd 139 Posted January 27, 2011 Report Share Posted January 27, 2011 http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony I may be tarred and feathered for this but I kindof like the look of it unconverted with that stock. I put in my order a couple of days ago and am having trouble getting an invoice. I drop alittle dough on it....if its not rediculous. Just out of curiosity. What is the price on one of those? It says contact to order but I feel a little funny calling them up since I have no real intention of ordering one. Quote Link to post Share on other sites
Superhawk138 202 Posted January 27, 2011 Report Share Posted January 27, 2011 http://www.reddragunweapons.com these guys are taking pre-orders on similar model with a thumbhole stock Tony I may be tarred and feathered for this but I kindof like the look of it unconverted with that stock. I put in my order a couple of days ago and am having trouble getting an invoice. I drop alittle dough on it....if its not rediculous. Just out of curiosity. What is the price on one of those? It says contact to order but I feel a little funny calling them up since I have no real intention of ordering one. Send him a PM he is a member here US_dragunov. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.