blobman 0 Posted February 17, 2011 Report Share Posted February 17, 2011 how the hell do you gat one inb a 308 conv.?i messed up and got one vs. the tapco w/ sleeve Quote Link to post Share on other sites
jimdigriz 580 Posted February 17, 2011 Report Share Posted February 17, 2011 how the hell do you gat one inb a 308 conv.?i messed up and got one vs. the tapco w/ sleeve The trick is getting the hole for the disconnector and the trigger to line up. A flashlight and a third hand can be useful, although I was eventually able to do it without assistance. As mentioned in the other thread, I use either a little screwdriver or brass punch to line them up from the right side of the receiver, then punch them out with the axis pin from the left side. Quote Link to post Share on other sites
grendelz 61 Posted February 17, 2011 Report Share Posted February 17, 2011 how the hell do you gat one inb a 308 conv.?i messed up and got one vs. the tapco w/ sleeve If I remember correctly. You can use one of the punches that came in your cleaning kit.. Its doable as the smith that did my last 308 used a kvar fcg. Quote Link to post Share on other sites
blobman 0 Posted February 17, 2011 Author Report Share Posted February 17, 2011 thanks agin guys Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.