Tell me about your Pistol

[topmaul 42]

I use a Beretta 92FS with a Deltapoint right now.

 

For IDPA I use a Beretta PX4 Storm 9mm

 

What do you use?

[Smoke Eater 7]

Carry a Glock 17(modified)Grip reduction,beavertail and cut down to hold G19 mags. Competition pistol is a Glock 34 Grip reduction,magwell and tweaked internals. I NEED ALL THE HELP I CAN GET!

[topmaul 42]

Carry a Glock 17(modified)Grip reduction,beavertail and cut down to hold G19 mags. Competition pistol is a Glock 34 Grip reduction,magwell and tweaked internals. I NEED ALL THE HELP I CAN GET!

Any Optic?

[Smoke Eater 7]

Carry a Glock 17(modified)Grip reduction,beavertail and cut down to hold G19 mags. Competition pistol is a Glock 34 Grip reduction,magwell and tweaked internals. I NEED ALL THE HELP I CAN GET!

Any Optic?

 

Negative. Been going back and forth about sending to Dave Bowie from TDI here in Ohio to have the slide milled for a Trijicon RMR but I just had it coated at Robar.

[topmaul 42]

I'm pretty happy with the delta point I have one on my S-12 also

[MCASgt New River 10,036]

I use my Sig P226 for my USPSA competitions. They say train with what you use...well, I have that piece as my bedside weapon, as my ccw, car ride piece ect. I know she performs well, shoots accurately and has "never" jammed on me. Sig makes a damn nice pistol if I may say so myself.

 

MCASSgt New River

[going12220 125]

in the past open class guns:

had the Taurus copy of the Beretta with a comp'd barrel and trigger done so it was single action only, gun was a tack driver but had been abused before I got it. previous owner was shooting it as a 9mm major class back before they changed the rules for that. Slide cracked replaced but with out the set screws to support the barrel, frame cracked replaced but I didn't bother to switch the trigger over just sold the gun it had lost it's magic.

got a Springfield factory comp 1911 single stack 45, tried a 1.5 scope with a B-Square mount, loved the gun hated the optics, still have the gun minus the optics. problem for me was it lacks capacity (170mm mag = 11+1).

current open class gun is a 40 caliber (170mm mag = 23+1)Glock 24 on a CCF stainless race frame with a Trijicon dot. several trigger upgrades done and a 9mm conversion barrel (170mm mag = 27+1), set ups work great for USPSA and steel plates.

past limited guns:

were 1911s or Glock 17 or 22. still have a 1911 current one is a Kimber with a few trigger mods (single stack clas 8+1), Glock most used is a more or less stock 17L used for USPSA, steel, and Glock matches. (140mm mag = 22+1)

For IDPA if and when I get around to it I have a Glock 19 that is more or less my "carry" gun.

what I'm missing right now is a revolver used a S&W 14 for years went to a Ruger Security 6 with a lot of work sold both guns for more than I thought they were worth till I went to replace them. looking at the new S&W 7 and 8 rounders hard right now for USPSA, steel, and most of all NRA action pistol.

will be cutting the herd soon to just a few guns cause I'm shooting a lot less and going to stuff with little or no movement / reloads on the go. most stand and shoot events don't require capacity so we'll see what the future brings. Thinking of long slide 1911.

Edited September 25, 2011 by going12220

[patriot 7,197]

Ruger Vaquero, (1st model) and a, Uberti '73 Birds Head. 45cal.

 

(CAS)

For Wild bunch:

 

Springfield Govt. Model 1911A1 45, Orig. 1917A1 Colt 45 Auto Rim, Orig. Mauser Red 9, Orig. Luger Police Model 9mm, Orig. Enfield No2 Mk 1 in 32 S&W

 

 

 

Edited September 25, 2011 by patriot

[Racer 27 37]

Started with a Beretta. Then bought a Glock 17. Put a little dot on it and practiced for hours and hours still couldn't find it under the clock so I'm back to irons.

[Doug Hartley 526]

I had a Caspian Open gun in .38 Super Comp and it worked very well, but a few months ago I had a custom STI Open gun built by John Larsen of JPL Precision. Shortened slide with holes in the side and a C-More red dot mounted sideways on a CCG mount and runs 9mm so I don't have to buy expensive brass any more.

 

Doug

 

[nobearsyet 3]

Springfield Gi WW2 model, Bomar rear sight, Schueman barrel (the one with the rib on the top with the ports in it) with a front blade TIG'd on, Cylinder and Slide trigger parts, Wilson extended mag release, have a deal that goes under the grip to mount optics, usually an Aimpoint but don't remember the model right now. When I need a hi'cap gun I reach for a SIG 226 in 40 S&W, XS Big Dot sights, trigger job, and that's about it.

[tnsongwriter 1]

 

I carry a Springfield Armory TRP Operator .45. This is the most accurate pistol I have. Crazy good shooter.

[topmaul 42]

I just got an EAA Witness Match Elite with a Henning trigger, mag well, sites, and a bunch of other upgrades.

 

It's a limited gun

[farmrboy 0]

Kind of slow to put up my two cents, but better late than never. I shoot single stack USPSA with a Taurus PT1911 ss w/rail. Only mod is a set of Truglo TFO sights. For multigun, I shoot a Tanfoglio Elite Limited. It's stock right now, but I do have plans for it. I am thinking about switching to limited class so I can use the Tanfoglio for all my matches because it's such a joy to shoot.