Erocku 0 Posted October 7, 2011 Report Share Posted October 7, 2011 I have a Saiga IZ-132 on the way that I'm going to do the conversion on. I was about to order the parts I need to do the conversion. If I'm removing the BHO, I don't need to modify the Tapco G2 trigger correct? Thanks. Quote Link to post Share on other sites
ChileRelleno 7,071 Posted October 8, 2011 Report Share Posted October 8, 2011 (edited) Correct, no mods necessary. Edited October 8, 2011 by ChileRelleno Quote Link to post Share on other sites
sjglaw 1 Posted October 8, 2011 Report Share Posted October 8, 2011 Reinstalling the BHO and spring is not a big deal and you might want to reconsider retaining it as it serves a useful purpose. Buying the modified G2 which is readily available, is only a little more $ Quote Link to post Share on other sites
bukowiec39 0 Posted January 17, 2012 Report Share Posted January 17, 2012 Today I started putting together my Saiga in 5.45x39. I was trying to install Tapco G2 and I was not able to. The pin goes through left side, through trigger "tube" and then is off the hole on the other side. I cannot line it up. Also, from the trigger guard view it doesn't look very pretty. Looks like there is too much room around. Like gaps. So I don't know. Quote Link to post Share on other sites
cgp 12 Posted January 17, 2012 Report Share Posted January 17, 2012 Pics would help a ton. Quote Link to post Share on other sites
bukowiec39 0 Posted January 17, 2012 Report Share Posted January 17, 2012 There is really no way to show it exactly. Pin goes in the hole on left, through trigger hole, and that's it. Unable to get this pin into the secong hole. Quote Link to post Share on other sites
lackgunCO 1 Posted January 24, 2012 Report Share Posted January 24, 2012 If the pin goes through without the trigger in place, then it should line up with the trigger in. If the trigger pin hole was not straight the pin wouldn't go through it at all. Do you have a double or single hook trigger? Is the receiver a single or double trigger set up? Most Saigas are single hook. Quote Link to post Share on other sites
leadchucker 12 Posted January 24, 2012 Report Share Posted January 24, 2012 Some of those kits come already modified for the BHO. If you get one of those, you'll have to make a spacer to take the place of the BHO. Quote Link to post Share on other sites
Foxtail207 23 Posted January 25, 2012 Report Share Posted January 25, 2012 If NOT using the BHO, make sure to get the unmodified G2, there are two styles at some vendors. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.