faststang90 18 Posted February 16, 2012 Report Share Posted February 16, 2012 i got a new Saiga Collapsible Intrafuse T6 Stock coming but i cant get the stock one off. i removed to 2 screws but it will not move is that it ? Quote Link to post Share on other sites
haugpatr 972 Posted February 16, 2012 Report Share Posted February 16, 2012 Did you remove the 3rd screw located on the bottom? Quote Link to post Share on other sites
JC GoF 70 Posted February 16, 2012 Report Share Posted February 16, 2012 What he said ^^ and you mite have to give it a sack to get it to come loose. Quote Link to post Share on other sites
faststang90 18 Posted February 16, 2012 Author Report Share Posted February 16, 2012 (edited) i only seen two screws one in the top and one on the bottom. it looks like a pin on the side. i removed the other screw but it just holds the cover on. Edited February 16, 2012 by faststang90 Quote Link to post Share on other sites
haugpatr 972 Posted February 16, 2012 Report Share Posted February 16, 2012 (edited) If all the screws are out, take a hammer to it, it will come off. ETA: there are 2 screws on the top and one on the bottom, remove them all. Edited February 16, 2012 by HOG76 Quote Link to post Share on other sites
faststang90 18 Posted February 16, 2012 Author Report Share Posted February 16, 2012 (edited) found it was under the one piece Edited February 16, 2012 by faststang90 Quote Link to post Share on other sites
faststang90 18 Posted February 21, 2012 Author Report Share Posted February 21, 2012 got the new stock on it.new old stock Quote Link to post Share on other sites
TheGinJew 1 Posted March 23, 2012 Report Share Posted March 23, 2012 Hey im thinking about buying one for my 7.62. How are you liking the new stock? Quote Link to post Share on other sites
faststang90 18 Posted March 23, 2012 Author Report Share Posted March 23, 2012 i like the new stock but i have to get some work to the gun. i cant shot more than a few shells before it it jams up Quote Link to post Share on other sites
sowhat6565 20 Posted March 27, 2012 Report Share Posted March 27, 2012 try to change the gas plug and puk. also the the low recoil spring. c.s.s sells all this as a reliability kit. makes a difference. also sgammo has a special on some centurion slugs. 250 for $70 or something like that. those ought to help loosen it up some to. nice paint on the mag, still need to do mine Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.