gregomega 929 Posted February 27, 2012 Report Share Posted February 27, 2012 Does anyone have their bolt modded, lets say by Pauly or another company when using a magwell? Or is it necessary to mod the bolt if you will be using a magwell? as the bolt mod was for easier insertion on a closed bolt with rock&lock mags, and the magwell & LRBHO bypasses that problem, does it not? Does it help with insertion of the mag still? And is the conversion any different using the LRBHO? Thanks AZG Quote Link to post Share on other sites
PA Shooter 7 Posted February 27, 2012 Report Share Posted February 27, 2012 Well... When Pauly does the bolt, you can rock'n'lock without any other modifications. So sure, it makes it even easier i would suppose... Quote Link to post Share on other sites
gregomega 929 Posted February 28, 2012 Author Report Share Posted February 28, 2012 I have his mod to my rock&lock s12, my question, does it assist/hinder function with an s12 with a magwell? Say like the IZL447 or exp-01 ver 30. Would the bolt mod do something or nothing for these guns? Quote Link to post Share on other sites
Wade Pruetz 103 Posted February 28, 2012 Report Share Posted February 28, 2012 I have his mod to my rock&lock s12, my question, does it assist/hinder function with an s12 with a magwell? Say like the IZL447 or exp-01 ver 30. Would the bolt mod do something or nothing for these guns? I think it would help loading a full magazine against the bolt. I run the TAC47 magwell on both my SBS and Race Gun, both have a little mod work to the bolt nothing like some of these I have seen on this site. I can load a 12 round mag against the bolt fairly easily so I won't do anymore mod-ing for fear of reliability issues especially on the race gun. 2 Quote Link to post Share on other sites
gregomega 929 Posted February 28, 2012 Author Report Share Posted February 28, 2012 I have his mod to my rock&lock s12, my question, does it assist/hinder function with an s12 with a magwell? Say like the IZL447 or exp-01 ver 30. Would the bolt mod do something or nothing for these guns? I think it would help loading a full magazine against the bolt. I run the TAC47 magwell on both my SBS and Race Gun, both have a little mod work to the bolt nothing like some of these I have seen on this site. I can load a 12 round mag against the bolt fairly easily so I won't do anymore mod-ing for fear of reliability issues especially on the race gun. Then again, after what you've said, it should be just like rock&lock. I would imagine the round would be in the same position. Quote Link to post Share on other sites
Wade Pruetz 103 Posted February 28, 2012 Report Share Posted February 28, 2012 I have his mod to my rock&lock s12, my question, does it assist/hinder function with an s12 with a magwell? Say like the IZL447 or exp-01 ver 30. Would the bolt mod do something or nothing for these guns? I think it would help loading a full magazine against the bolt. I run the TAC47 magwell on both my SBS and Race Gun, both have a little mod work to the bolt nothing like some of these I have seen on this site. I can load a 12 round mag against the bolt fairly easily so I won't do anymore mod-ing for fear of reliability issues especially on the race gun. Then again, after what you've said, it should be just like rock&lock. I would imagine the round would be in the same position. Yeah with rock and lock you have a solid pivot point to compress the shells against as they push against the bolt and engage the mag catch. The magwells don't have the pivot point and rely solely on compressing the shells as you insert the mag straight into the magwell. Like I said I can do it easily but you do need to give it a firm crisp push to compress the shells and get it to lock in. 1 Quote Link to post Share on other sites
snafu360 21 Posted February 28, 2012 Report Share Posted February 28, 2012 I have a Jt magwell and my bolt done by paulie. You still have to give it a minimal "rock and lock" to get the mag in clean. No problems at all compressing the shell on a loaded mag. 1 Quote Link to post Share on other sites
gunfun 3,930 Posted February 28, 2012 Report Share Posted February 28, 2012 I have the SGM JT magwell and an unmodified bolt. I really don't need the bolt contoured, but I am sure it would be nicer. I can say that loading is effortless, and I doubt there would be much noticeable difference. Possibly the bolt scuffing the top shell on the backstroke would be reduced. There is a minor amount of rock, and magazines will drop free every time if the barrel is pointed down slightly. If not, it is the vast majority of the time. I have got the habit of giving a little forward jerk with the gun still on target as I hit the release. They always drop free that way. If you do get bolt contouring, that would be a great time to get a galil, dogleg, or left side handle. 1 Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted February 28, 2012 Report Share Posted February 28, 2012 I did an agressive reprofile in the MAG12 gun. Full SGM12s go in easy. I'm not sure how it would have been without the reprofile. I mainly did the reprofile to reduce resistance. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.