Rabidmonkey777 0 Posted March 28, 2012 Report Share Posted March 28, 2012 Hi all. I am in the middle of a 308 conversion. I got a complete conversion from CSS. Almost everything is done and I am reassembling the FCG. When the rifle is almost complete with the trigger/spring/hammer and retaining plate, during function checks the leg on the right side of the spring moves from the rear of the trigger (where its supposed to be) and falls inside of the trigger group. The spring is the factory one, and the rifle only has one "hook" in the receiver. This causes malfunctions and the trigger will not reset/clear with it falling in there. I know I am installing it right. Do I need a new hammer/trigger reset spring? Did anyone else have this problem with their 308? Thanks for the help, I am so close and didn't expect this to be an issue??! Quote Link to post Share on other sites
jojo200517 68 Posted March 28, 2012 Report Share Posted March 28, 2012 I didn't have this issue with mine and used the conversion kit from CSS and factory spring with it. Ya know what they say a picture is worth 1000 words. maybe some pics of the problem would help us figure it out Quote Link to post Share on other sites
mogunner 240 Posted March 28, 2012 Report Share Posted March 28, 2012 I've seen this posted elsewhere and the fix seems to be just bend the spring arm in a little bit. Quote Link to post Share on other sites
Rabidmonkey777 0 Posted March 29, 2012 Author Report Share Posted March 29, 2012 Thanks guys, bent the spring and the problem was solved. Thanks for the info. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.